Trailer Hub w/6 Lug Pattern, Inner Bearing Inner Diameter 1.5, Outer Bearing Inner Diameter 1.25

Updated 09/25/2018 | Published 09/24/2018

Products Featured in This Question

Square BT8 Spindle for 2,000-lb Trailer Axles - 1-1/2" Wide

(31)

$52.14

Complete Agricultural Hub Assembly for Spindle # AS3000F

(12)

$135.05

Question:

Im looking for 6 lug hubs for my trailer it has house trailer type hubs now. But the inner bearing is 1.5inch outer is 1.25inch . All the the hubs that I can find that replace house trailer hubs are 1.75inch inside. This is a two axel gooseneck is factory build . thanks

asked by: Fred H

Expert Reply:

Bearing measurements need to be as accurate as possible, to at least the thousandth of an inch, and require calipers if you have to measure them. Otherwise look at the bearing numbers that are stamped into the sides of the bearings. With those numbers we can determine a lot about the running gear and if anything else will fit.

If the measurements are exactly 1-1/2 and 1-1/4 inches then the only option we have would be agricultural hub # AH30660FCOMP which has a 6 on 6 bolt pattern.

If you find the bearing numbers let me know what they are. The hub above uses inner bearing LM29749 and outer bearing LM67048.

expert reply by: Michael H