Square LED Trailer Lights and 5-Way Wiring Harness for a Wesco Boat Trailer
Published 01/27/2017
Products Featured in This Question
Question:
I have a 26foot WESCO aluminum beam trailer for a 22foot boat. The wiring harness is shot and lights are old bulb style. It has a reverse solenoid for disc hydraulic brakes on tandem axel. It currently has the small square lights in back. What is the over 80 and under 80 thing? Is that height of boat on trailer off ground? Also, with the brake release solenoid, I think I need a 5 prong flat wiring harness at least 25foot long- cannot find on your site. Any help on lights and wiring replacement suggestions?
asked by: Andrew I
Expert Reply:
Over or under 80 means 80 inches of width. There are certain lighting requirements if the trailer is more than 80 inches wide. Trailers that are less than 80 inches wide can still use lights that are indicated as over 80 inch.
Since you need a 5-way wiring harness I recommend getting the lights separately, # STL8RB and # STL9RB, and then getting # A25W5B for the harness. This is a 5-Way wishbone harness. That means that the running light pin has 2 wires for running lights on each side of the trailer. It is so you don't have to splice in a jumper wire.
For over 80 inch wide trailers use # STL3RB and # STL2RB. I have included a link to trailer lighting requirements for you as well.
Product Page this Question was Asked From
LED Combination Tail Light Kit for Trailers under 80" Wide - Submersible - Driver and Passenger
- Trailer Lights
- Tail Lights
- Brake/Tail/Turn
- License Plate
- Marker
- Square
- Surface Mount
- Submersible Lights
- LED Light
- 5L x 5W Inch
- Red
- Optronics
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Trailer Wiring
- Search Results: submersible marker lights
- Search Results: flat tow wiring harness
- Search Results: boat trailer wiring harness
- Search Results: trailer tires and wheels
- Video: Detailed Breakdown of the 35 Ft 4-Way Trailer Wiring Harness
- Video: Ultimate Overview of the Optronics LED Combination Trailer Tail Lights
- Video: 2-Speed Boat Trailer Winch with 20' Strap and Brake: The Breakdown
- Shop: 35 Ft 4-Way Trailer Wiring Harness - Wishbone Style - 42" Ground
- Shop: LED Combination Trailer Tail Light - Submersible - 7 Function - 18 Diodes - Square - Passenger Side
- Shop: Dutton-Lainson Hand Winch Strap
- Shop: Optronics LED Combination Trailer Tail Lights - Submersible - 40 Diodes - Driver and Passenger Side
- Shop: Hand Winch Strap with Safety Hook, 2" Wide x 20' Long - Extra Heavy Duty - 4,800 lbs.
- Shop: Optronics 35 ft. Wishbone 5-Way Trailer Harness with 30" Ground and 5 ft. Blue Wire
- Shop: 2-Speed Boat Trailer Winch with 20' Strap and Brake - 3,200 lbs
- Video: Breaking Down the LED Combination Trailer Tail Light
- Q&A: What are the Functions of a 4-Way Flat Trailer Wiring Connector with 5 Wires
- Search Results: trailer lights
- Search Results: ez lube grease cap trailer bearings races seals caps
- Search Results: bearing caps
- Shop: RV Interior Lighting
- Shop: Fifth Wheel Hitch
- Q&A: Which Grease Seal is Associated with L68149 Bearing and L68110 Race on a Boat Trailer Hub
- Video: How to Choose a Trailer Brake Controller
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: Curt T-Connector Vehicle Wiring Harness Review C56040
on Trailer Lights
