Replacement Rear Bumper for a 1971 Ford F-100

Question

Question:

Will the sure fit xlt chrome bumper fit? Not sure the difference between xlt and standard which one is better for the 71 f100

asked by: Seth

0

Expert Reply:

The XLT refers to the style of the Westin bumper. I have included a diagram that shows the different bumpers to better illustrate how they are different.

Bumper # 21007-92230 will fit your 1971 Ford F-100 though you may find that the styling of bumper # 21002-92230 is a better match while # 21000-92230 is more traditional for trucks of that era.

expert reply by: Michael H

0

click to enlarge

Answer 1

Hey Casey, the correct Westin Fey Surestep bumper for your 1996 Ford F-150 XLT is the part #21007-92230 which comes with the correct hardware/install kit that is needed.

view full answer...

Answer 2

The went out to our warehouse and measured the TorkLift GlowStep Stow N' Go Mounting Bracket part #TLA7810 for you. The mounting holes are spaced 2-1/2" apart top to bottom and 9-3/4" apart side to side. I have attached a photo of these…

view full answer...

Answer 3

The mounting bracket for the TorkLift GlowStep Stow N' Go Scissor Steps #TLA7834 is 23" wide x 3-1/2" tall if you measure from outside edge to outside edge. With the retention straps/rest of the bracket on the sides included you're…

view full answer...

Answer 4

Looks like you have an older version of the 21007-92230 that you referenced which fits the following: 1973 - 1991 Chevrolet C/K Series Pickup 1973 - 1991 GMC C/K Series Pickup 1967 - 1983 Ford F-100, F-150, F-250, F-350 Standard Bed models 1992 -…

view full answer...

Answer 5

The Westin Fey Surestep Rear Bumper #76001 you're referring to is not a fit for a 1994 Ford F-150, but Westin Fey does have a fit for your with the Westin Fey Surestep Deluxe XLT Rear Bumper with Custom Installation Kit #21007-92230. This will…

view full answer...

Answer 6

The #76001 is not a direct fit for your 1989 Ford Bronco. Instead you will want the Westin Fey Surestep Rear Bumper with Custom Installation Kit - Chrome Plated Steel #21002-95600 which is the same style bumper in the correct fit for your Bronco. We…

view full answer...

Answer 7

I attached a link to a page that has all of the replacement rear bumpers we offer for your 1997 Ford F-250 like the black #20000-92230 or the silver #20002-92230. These come with install hardware and license plate lights as well.

view full answer...

Answer 8

The #TJSC-24 scissor style stabilizing jack isn't an RV specific product, if it's 2500 lb capacity and 18-3/4 inch lift and the pictured mounting bolt pattern is compatible with your Rockwood Mini-Lite, it'll work perfectly for you.…

view full answer...

Answer 9

The individual weight is 10 lbs for one of the stabilizers in the Scissor Stabilizer Jacks w/ Handle - 18-3/4" Lift - 10,000 lbs - Qty 4 #TJSCHD-24-4.

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

Hello Rocky, thanks for reaching out. If your new leaf springs do not have as much of an arch as the old springs they are definitely not going to help your situation if your tires are already rubbing on the fenders. What we would usually do here is…

view full answer...

Replacement Rear Bumper for a 1971 Ford F-100

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching