

/
Westin/
Chrome/
Rear Bumper/
Surestep Bumper/
Step BumperItem # 21002-92230
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
This item qualifies for Free Shipping
This sturdy steel replacement bumper has a non-slip pad along the top for grip as you step into your truck bed, built-in hitch ball holes, and an 8,000-lb capacity. Chrome plating adds style and resists rust. Custom mounting kit included.
Features:
Specs:
Constructed of high-strength steel, this rugged utility bumper is sure to last. The chrome plating helps to resist rust and corrosion while also providing sleek styling. And the ribbed face improves both the appearance and the strength of the bumper.
A molded polymer plastic step pad runs the length of the bumper to provide a tough, non-slip step surface on top.
Designed to meet or exceed the towing capacity of your vehicle's factory bumper, this Fey Surestep bumper can haul up to 8,000 pounds when you add on a hitch ball (sold separately), which must have a 1-inch-diameter shank.
1973 - 1991 Chevrolet C/K Series Pickup
1973 - 1991 GMC C/K Series Pickup
1967 - 1983 Ford F-100, F-150, F-250, F-350 Standard Bed models
1992 - 1996 Ford F-150 Standard Bed models
1984 - 1991 Ford F-150, F-250, F-350 Standard Bed models
1992 - 1996 Ford F-250 and F-350 Standard Bed models
1997 - 1997 Ford F-250 and F-350 Heavy Duty Standard Bed models
1972 - 1980 Dodge Full Size Pickup Standard Bed models
1981 - 1993 Dodge Ram Pickup Standard Bed models
Video of Westin Fey Surestep Rear Bumper with Custom Installation Kit - Chrome Plated Steel
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
We'll be taking a look at and installing the Westin Fey SureStep rear bumper with custom installation kit. This would be part number 21002-92230. This sturdy steal replacement bumper has a nonslip pad along the top to add a sure grip for getting in and out of your truck bed with built in hitch holes that offer 3 different mounting locations and an 8,000 pound towing capacity with an 800 pound ton rate rating. Now the hitch ball hole diameter is going to be about 1 inch. Just add a hitch ball, it'll be sold separately, and you're ready to tow. The chrome plating is going to add style and resist rust while adding utility and a rugged good look to your vehicle. License plate lights wire into your running lights that are already into your vehicle. Now on this particular vehicle the customer wants to get a step back on the back side of the vehicle and get rid of the blazer bumper that he had put on from the after market accessories.
Now another reason is that it is bent and those brackets are kind of out of whack here on the backside. We're going to take off the brackets and remove the rear bumper and put new brackets and hardware in place along with our new bumper. We're going to need to remove these 2 bolts securing the back bumper bracket. We'll lube them up, put a little spray lubricant on the other side to help them come out. We'll go ahead and get a strap and secure our bumper so that way if it does decide to fall off on its own it isn't going to go to far under its own weight. I'm going to go ahead and hold the bumper while we tap out the bolts on each side. Once we have the bumper bolts removed we can go ahead and lower down the bumper.
Now we're going to go ahead and place our bracket on. Now our left side or driver side bracket it's going to read 223 and then left. I'm going to place it in the second hole here with our half inch bolt and flat washer coming from the outside and then in the big groove here the same way. On the backside we'll add our lock washer and our nut. Let's go ahead and put on our passenger side. Now with our outer brackets in place we're ready to put our bumper up.
We'll go ahead and get an extra set of hands to help us hold it up so we can put in our hardware. Now those bolts going through that outer bracket is going to be the same as what we used in the frame with that flat washer and bolt and a lock washer and nut on the backside. Now we're just going to use a pole stand underneath the backside of the bumper to hold it level while we tighten everything down. We can always use a level to on the backside and your sure that we're going to be straight up and down. All right with our bumper nice and level we'll go ahead and tighten down our brackets. Start with the ones here on the frame, make sure we're still level, and then we can go ahead and tighten down the ones securing our bumper to the brackets.
I'm going to go ahead and torque it down to manufacturer specifications. Now we can go ahead and put our license plate lights into place. Notice the shape here is going to match up with the shape on the side of the bumper. Place it in and then take our clip from the backside and clip it in. Now we'll take our 2 light bulb holders, place our light bulbs in, press down firmly. We'll take them and we'll plug them into the back and then we can wire them up. When placing it in you'll see the prongs on the side will match up to the cut outs on the inside of the lens. Press it in and twist. It'll be locked in then. Now on this vehicle it does have quite a mess of wires going on, but we did check our wires with out tail light and our tail lights are going to be running on that brown wire coming off of the 4 pole. We're going to quick splice into that for our power going to our license plate lights, and then our negative will be the ground coming off of our 4 pole as well. Now we'll run our wires back to connect to our power and ground coming off of our 4 pole. We'll take those quick splice connectors provided in the kit and then connect them on, and then we'll crimp it down and then close the cover. Taping it off will also ensure that we don't get any dirt, debris, or water inside of our connections. I'll take our wires and secure them up to the existing wire along here on the back of the vehicle. Now another great feature about this is it's going to come with the mounts to mount up your license plate. Simply press them in and we can take our provided screws and screw in our license plate. Let's go ahead and turn on our head lights so we ensure that our license plate lights are on. That will do it for our review and installation of the Westin Fey SureStep Rear Bumper part number 21002-92230.Speaker 2: You can find this and everything else right here at etrailer.com. What's up man.
Average Customer Rating: 4.8 out of 5 stars (20 Customer Reviews)
This sturdy steel replacement bumper has a non-slip pad along the top for grip as you step into your truck bed, built-in hitch ball holes, and an 8,000-lb capacity. Chrome plating adds style and resists rust. Custom mounting kit included.It was good bought a truck 96 ford 7.3 with 75,000 bumper was the only thing messed up got this one it perfect. I’m up put up pics of the rear bumper just wanted to show how clean my truck is first. Lol 662420
Finally got my Bumper, but it was Not etrailers fault UPS delivered to someone else and had to track it down. The Staff at etrailer where very helpful and courteous. Great Bumper for my 96 Ford F-150 Thank you 693396
Review from a similar Westin Surestep in Bumper
Bumper is fine; no problems. But the accompanying instructions......that's another matter. You would think that replacing a bumper would be straightforward--nuts and bolts. But there are mounting brackets, and holes drilled for vehicles other than yours, and the illustrations were, frankly, deficient. Yes, I finally figured it out. But clearer illustrations would have saved me a number of hours, and would have earned the product a 5th star. 397086
Bumper is fine. Thanks for asking. If I recall correctly, my only problem was with the instructions, which could have been much clearer, esp for someone doing an installation for the first time.
Review from a similar Westin Surestep in Bumper
The reason that I'm rating this lower is because within the 1st couple of months of installing it, it had evidence of rust on it. I haven't taken the time to sand and repaint it but it's on my truck and my truck is at home. If it makes any difference, I'm happy to supply you with pictures of the rust on it. If this rating is disappointing to you, well, I was disappointed that this produce was rusting within a couple of months of installing it. I did not drive it in any snowy conditions, where there was salt on the road either. 647660
The bumper is covered by a 3 year warranty. Please contact our Customer Service folks at 800-298-8924.
--Review from a similar Westin Surestep in Bumper
I bought this for a 1995 Ford F150. It's replacing a bumper that's been towing a steel horse trailer for 5 years- the mounting brackets fatigued and cracked badly. The brackets for this kit are beefy-1/4 inch steel plate. It installed directly, without much fuss or fitting. Using a couple of jacks I was able to do the install unassisted. It fit perfectly. The original bumper had corner braces that needed to be re-installed. All I had to do was punch a 1/2 inch hole at each end to mount those braces (squaring the hole out for the carriage bolt was another matter).The bumper has a nice gray powder coat (it says silver, but it's really gray) that goes well enough with this old truck. It's a neutral gray and should work with just about any color, warm or cool. I'm very pleased with this purchase- a nicely made product. I hope it holds up. It will be pulling the same trailer. I'll try to update this review after I've had some time to use it. Nice ordering process and fulfillment by etrailer too. 28501
Review from a similar Westin Surestep in Bumper
Bumper was shipped quick and appearance was just as described.Looks great on my '76 ford!! 171174
Review from a similar Westin Surestep in Bumper
Less then a hour to install. Great looking bumper. Thanks guys!! 342802
Hello, the bumper is holding up great it was a good purchase.
Review from a similar Westin Surestep in Bumper
You can not go wrong with this rear bumper for the price. One years out and it still looks new. The installation was easy. A little more distance from the truck tailgate to the bumper for my 1999 Nissan Frontier 4X4 than the original, but the distance I painted with black spray paint and it looks perfect. Same distance from the ground. I would order this bumper again. 601170
Review from a similar Westin Surestep in Bumper
Great bumper for my truck! Highly recommend! My 1990 Toyota pickup was without bumper for 2 years and it looked horrible. I ordered one from etrailer and it was installed by my mechanic; the truck looks like new again. A great experience and will use them again if needed. Thank you, Anthony V 267470
Review from a similar Westin Surestep in Bumper
We were in the midst of moving when I realized my original 1992 Nissan pick-up bumper was rusted thru from the inside out. It sort of collapsed when I tried pulling our trailer. E-Trailer got us our new bumper within a week, and I got it mounted that evening. Even had the little connectors to hook up the license plate lights that came with it. Took me less than 3 hours to take off the old "mess" and put the new one on. Looks great, pulls my trailer, and we still got moved into our new home before the end of the month! God is Good! 302388
Well, its actually been almost 2 years and the bumper works great. It even allows the trailer we pull to be turned at a much more sharper angle when backing in different directions.
Review from a similar Westin Surestep in Bumper
Item as described. Fast shipping and packaged well! 715821
Review from a similar Westin Surestep in Bumper
I am very happy with the way it fit. It was a very seamless installation. 702908
Review from a similar Westin Surestep in Bumper
Great product. Easily installed! 541617
Review from a similar Westin Surestep in Bumper
arrived when they said, straight forward installation in about 20 minutes (most of that time was figuring out the wiring of the truck!) Mounted solid to pickup -best looking part of the whole truck! 439196
Review from a similar Westin Surestep in Bumper
Ordered a rear bumper for my 1997 Nissan p/u very pleased with this product, looks great and everything fit perfectly. Highly recommend etrailer. 395938
Review from a similar Westin Surestep in Bumper
I ordered this product on Monday April 17 and paid for the basic shipping and it arrived at my house Wednesday April 19. That is awesome that this company does this and takes great pride in showing the customer that they care. The package came and was greatly wrapped. The product was protected and looks great. I can't wait till i have another rebuild project because I will not think twice about going any where but here. 369618
Review from a similar Westin Surestep in Bumper
Good looking bumper and very substantial. Use to tow skiff after factory bumper bent while pulling boat out of water at low tide. Delivered when etrailer stated. Will buy more products from this company! 289590
Review from a similar Westin Surestep in Bumper
Excellent customer service , very helpful. . A good transaction 256870
Review from a similar Westin Surestep in Bumper
Great fitting Part, fast shipping, easy to do business with, can't ask for anything more. 199248
Review from a similar Westin Surestep in Bumper
Looks great, easy to install. 142489
Ask the Experts about this Westin Bumper
Do you have a question about this Bumper?
Do you have a question about this Bumper?
At etrailer.com we guarantee:
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.