How to Determine Correct Replacement Bearings for Older Calkins Boat Trailer
Updated 06/21/2016 | Published 06/20/2016 >
Products Featured in This Question
Question:
I have an older Calkins boat trailer with 530 x 12 tires I need to replace the bearings and the trailer is at the lake. I wonder if you could save me a two hour drive by telling me what size bearings and grease seals are needed. Thanks
asked by: Bob
Expert Reply:
Oh how we wish, almost every day, that all trailer makers maintained detailed records of the components used in the fabrication of their trailers, but sadly, we do not live in that world. So, you will need to pull a wheel and hub, and check the numbers on the bearings and grease seal. I linked a photo that shows the typical placement and appearance of bearing and seal part numbers.
With those part numbers in hand you can directly check our site for those parts by entering each number in our search field.
We offer individual bearings, races, seals, grease, etc., and we also have kits of the most popular bearings already put together with races and a seal, such as bearing kit # BK2-100. This kit consists of bearings # L44649 and # L68149. their matching races, a double-lip grease seal 10-19 and a cotter pin and tang washer.
You will want to use marine-grade wheel bearing grease # L54FR and a bearing packer like # L70025 when you re-pack your bearings. I linked an article and video to help you with this process.
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 2K Axles - 10" to 12" Wheels - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Idler Hub
- Pre-Greased
- Standard
- L44643 / L44643
- Standard Grade
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Demco Hydraulic Brake Actuator - Drum - Zinc - 2" Ball - 7,000 lbs
- Search Results: spare tire mount
- Search Results: surge brake actuator brake actuator
- Video: All About the Demco Hydraulic Brake Actuator-DM72VR
- Video: What to Know About the Demco Hydraulic Brake Actuator-DM72VR
- Search Results: trailer tires and wheels
- Shop: Kenda 4.80-12 Bias Trailer Tire with 12" Galvanized Wheel - 4 on 4 - Load Range C
- Shop: Taskmaster 4.80R12 Radial Trailer Tire w/ 12" Vesper Silver Mod Wheel - 4 on 4 - LR C
- Shop: Taskmaster 4.80R12 Radial Trailer Tire w/ 12" Vesper White Spoke Wheel - 4 on 4 - LR C
- Q&A: How to Determine if a 7K Dexter Trailer Axle Hub has 1/2 Inch or 9/16 Inch Studs
- Search Results: l44648
- Search Results: trailer jack
- Video: Ultimate Overview of the Trailer Idler Hub Assembly for 2K Axles
- Video: All About the Trailer Idler Hub Assembly for 2,000-lb Axles
- Shop: Kenda Karrier S-Trail ST145/R12 Radial Tire w/ 12" White Spoke Wheel - 4 on 4 - LR D
- Shop: Kenda 4.80-12 Bias Trailer Tire with 12" White Wheel - 4 on 4 - Load Range C
- Shop: BT8 Spindle for 2,000-lb Trailer Axles - 1-1/4" Diameter
- Search Results: calkins trailer parts
- Search Results: 48 10 trailer tire and wheel
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Suspension Enhancement
- Q&A: Comparing Kenda KR03, KR35, And KR53 Tires
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Video: Review of etrailer Trailer Hubs and Drums - Hub with Drum - AKHD-545-35-EZ-K






