Search: surge brake actuator brake actuator   >  

To replace the inner slide on the Model 20 Dexter Brake Actuator #T1521000 you need the part #T1278800. The Titan and Dexter couplers are the same thing so this will fit even though the branding is different.

Hey Paul, We offer a few hydraulic actuator hoses, but none with a quick disconnect fitting. If you wanted to remove the quick disconnect fitting and just add in a union #DE44SR you could go with a hose like the #BH-3MFS-3-5.

Thanks for the pictures of your actuator Corey, I can see you have an Atwood coupler which like you mentioned is no longer available so it would be time to replace it with something current. Since you would prefer a manual lockout actuator (don't…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

Good morning, James. The total length of the Dexter DX7.5L A-60 Brake Actuator #DX29FR is 19". I made a diagram for you which I have included below.

The master cylinder assembly on the Titan model 20 actuators, like #T1521000 as an example, is bolted to the inside of the actuator. Take a look at the picture I have included as an example. There are 2 bolts on each side holding in the assembly.…

The Dexter DX7.5L A-60 Actuator #DX56FR you have is designed to be mounted on the end of the trailer frame as seen in the image below. Based on how your actuator was mounted the Actuator #DX89FR would best install like your current actuator. If you…

Yes, the replacement inner member part #DX99FR does fit your UFP A-60 actuator and will work perfectly fine with the tandem axle disc brake setup you have now.

If you have the cab and chassis model of the 2009 Chevy Silverado 3500HD, we have two AirLift 5000 airbag kits that will work with your 4X4. For this you can choose from either the Air Lift LoadLifter 5000 Ultimate Air Helper Springs part #AL88286 or…

The Dexter DX7.5L A-60 Brake Actuator part #DX89FR for disc or part #DX33FR for drum will work to replace both a UFP A-60 or A-75 Brake Actuator. The A-60 is rated for 6K and the A-75 is rated for 7.5K. The Dexter DX7.5L A-60 Brake Actuator is rated…

Yes, the mounting brackets included with the DeeMaxx Disc Brake Kit #DE72FR are also stainless steel.

The DB-42 is an older style of UFP 3,500 lb axle disc brake components. The Kodiak kits like the part #K2HR35D will fit in replacement of that and would be an upgrade so this would be a great solution. It comes with everything you'd need to…