Will the MaxxAir II RV and Enclosed Trailer Roof Vent Cover # MA76JR Fit Over Fan-Tastic Vent

Question

Question:

We have a 2016 airtream interstate RV with a fantastic fan and we want to purchase the correct vent cover. We likethe max air two. Can the lid open enough so it will not interfere .

asked by: Robert Y

1

Helpful Expert Reply:

The MaxxAir II RV and Enclosed Trailer Roof Vent Cover # MA76JR is going to work well on your 2016 Airstream Interstate RV that has a Fan-Tastic vent installed on it.

expert reply by: Jameson C

1

Answer 1

Hey Paul, yes the B&B RV City Water Inlet for Flusher with Flange #BM58RR would be the correct replacement for your black tank flush input connection on your 2025 Keystone Montana 3231CK. This also comes with butyl tape to seal it to your RV so…

view full answer...

Answer 2

Hi Shawn! You're dealing with a common issue when installing a MaxxAir II cover #MA76JR on a MaxxFan 4751KS, like the #MA00-04751KSX. Here’s the situation you're running into: -First, the MaxxFan lid opens almost vertical when fully opened…

view full answer...

Answer 3

Yes, it can! You'll just need to replace yours with a City Water Inlet like item #BM26RR. If you would like to send me some measurements of the one currently on your trailer, I can recommend a more specific one. Feel free to comment below or…

view full answer...

Answer 4

Hey Paul, we actually shot an install video for the Softstart RV part #SSR54FR on an Advent Air RV AC unit like you have which I attached to this page. You might have to scroll down to bottom of the page to see it. We installed it by locating in the…

view full answer...

Answer 5

I spoke with my contact at MaxxAir regarding the MaxxAir 2 Vent Covers like the Smoke #MA00-933073 that you were looking at and the Standard Covers like #MA00-933067. He said there are two primary differences between the two models. The first is that…

view full answer...

Answer 6

Hey Dwayne! To find the right slide-out topper length you need to get the flange to flange measurement on your R-Pod slide-out. See the attached photo. Once you have this measurement you can add it in the comments below and I'll help you find the…

view full answer...

Answer 7

Hey Paul, good question. The direction of the clip does not really matter. As long as they are fully inserted, there isn't any risk of them coming out, regardless of which direction they are facing. Movement from travel is not enough to cause…

view full answer...

Answer 8

Hey Daniel, do make cutting the Replacement Cut-To-Fit Slide Topper Fabric for Solera RV Slide-Out Awnings #SO84VR as easy as possible I would recommend using fabric scissors. What slide topper you are looking to replace the fabric of?

view full answer...

Answer 9

Unfortunately, it will not Brian but thanks for the picture. Our Replacement Fabric for etrailer Slide-Out Toppers has a different attachment method so it will not work with your Solera RV Slide-Out Awning item #LCV000177334. The only replacement…

view full answer...

Answer 10

The Blue Ox SwayPro Weight Distribution System part #BXW0750 which is rated for 550 lbs - 750 lbs is what I recommend for a trailer with 550 lb tongue weight and around 100 lbs in the truck bed. In regards to choosing the best weight distribution…

view full answer...

Will the MaxxAir II RV and Enclosed Trailer Roof Vent Cover # MA76JR Fit Over Fan-Tastic Vent

Product Page this Question was Asked From

Continue Researching