Looking for Replacement Black Water Flush Inlet for 2025 Keystone Montana 3231CK

Question

Question:

I have a 2025 Keystone Montana 3231CK the black tank flush input connection is leaking from the back of the connection Is the BM58RR the right replacement part?

asked by: Paul G

0

Expert Reply:

Hey Paul, yes the B&B RV City Water Inlet for Flusher with Flange # BM58RR would be the correct replacement for your black tank flush input connection on your 2025 Keystone Montana 3231CK. This also comes with butyl tape to seal it to your RV so that it won't leak as well. Any idea how yours broke?

expert reply by: Jameson C

0

Answer 1

Hi Shawn! You're dealing with a common issue when installing a MaxxAir II cover #MA76JR on a MaxxFan 4751KS, like the #MA00-04751KSX. Here’s the situation you're running into: -First, the MaxxFan lid opens almost vertical when fully opened…

view full answer...

Answer 2

The MaxxAir II RV and Enclosed Trailer Roof Vent Cover #MA76JR is going to work well on your 2016 Airstream Interstate RV that has a Fan-Tastic vent installed on it.

view full answer...

Answer 3

Yes, it can! You'll just need to replace yours with a City Water Inlet like item #BM26RR. If you would like to send me some measurements of the one currently on your trailer, I can recommend a more specific one. Feel free to comment below or…

view full answer...

Answer 4

Hey Adina, from what I could find the Norcold N811F requires a cutout that is 60" high x 23-1/2" wide x 24" deep. I would double check your opening just to be sure but based on those dimensions I recommend the Norcold RV Refrigerator…

view full answer...

Answer 5

Hello John, thanks for reaching out. According to my research, the Atwood 8525-IV-DCLP is a 25,000 BTU furnace. We do have a 25K BTU unit from Dometic that can be used to replace this, but it would not be a direct replacement. Take a look at the…

view full answer...

Answer 6

Hello Brian, Wow, that is a really nice camper! We will definitely have some Snap pads that are going to work for you, but unfortunately I do not have a database that supplies me with what is put on what trailer, my job would be a whole lot easier if…

view full answer...

Answer 7

The MB Sturgis Single Stage Propane Regulator #108072 is the correct replacement for your GR-630 regulator #37207-30325. The in/out size on #37207-30325 is 1/4" FPT inlet x 1/4" FPT outlet based off my research. I was unable to find any…

view full answer...

Answer 8

That's an 8k rated Dexter brake assembly for the right hand side of the trailer which we offer with the part #DX52QR for just the one assembly or part #23-428-429 for both the right and left side.

view full answer...

Answer 9

According to Cruisemaster, the DO35 can be used with load distribution hitches (WDH) providing the coupling movement is not obstructed and the maximum downward load of 350kg is not exceeded. Looking at their instructions you will have to get an…

view full answer...

Answer 10

Yes, the left rear leg for the Lippert Ground Control 3.0 Electric 4 Point Leveling System is the same as the left middle leg for the Lippert Ground Control 3.0 Electric 6 Point Leveling System. If your left middle leg measures 17" long then you…

view full answer...

Answer 11

The Blue Ox SwayPro Weight Distribution System part #BXW0750 which is rated for 550 lbs - 750 lbs is what I recommend for a trailer with 550 lb tongue weight and around 100 lbs in the truck bed. In regards to choosing the best weight distribution…

view full answer...

Looking for Replacement Black Water Flush Inlet for 2025 Keystone Montana 3231CK

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching