4-Way Mounting Bracket Recommendation for Replacement 4-Way for 2015 Ford F-150

Question

Question:

is there a mounting bracket for Replacement OEM Wiring Harness for Ford F-150 - C56110

asked by: Johnny G

0

Expert Reply:

For a 4 way mounting bracket to hold the 4-way connector of the part # C56110 I would recommend the # 18144 and the # C57202.

The # 18136 will attach to the crosstube of the hitch and then the # 18144 will attach to it to provide a bracket. I attached an install video for you to check out as well.

expert reply by: Jameson C

0

Answer 1

I recommend our etrailer Trailer Hitch Receiver #e63TR for your 2015 Ford F-150. This will bolt on your truck and is rated for trailers up to 6,000lbs. For the trailer wiring you will first want to check for a blank connector near the drivers side…

view full answer...

Answer 2

Where to start with your wiring harness depends on what available connectors you have under the bumper of your 2020 Ford F-150 and also what trailer connector you're looking to add on your truck. If your truck already has the square shaped…

view full answer...

Answer 3

I don't believe that the 2009 StarCraft Popup Campers needed to have trailer brakes, so for your 2013 Ford F-150 you will need a trailer hitch, 4-way wiring connector, and ball mount. Without knowing what you already have, I'll give you…

view full answer...

Answer 4

According to Curt Manufacturing, the #C56110 is a fit for 2010-2020 Ford F-150 models, so it will indeed work on your truck.

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 10

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 11

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 12

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

4-Way Mounting Bracket Recommendation for Replacement 4-Way for 2015 Ford F-150

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching