Tow Ready 4-Pole Mounting Bracket Installation

content loading



Customers compare 18140 to these similar products




Products Featured in this Video




How to Install a Tow Ready 4-Pole Mounting Bracket


Today we are going to be installing the universal 4-Flat connector part number 18144 in conjunction with our universal short bracket part 18140. With our wire already routed outside of the vehicle we'll go ahead and install the 4-flat mounting bracket on the universal mounting bracket. We'll use the supplied hardware to secure it. With our two screws tightened down, take the worm clamp and secure directly to the hitch. Now we've got that tightened down, I'll go ahead and take a pair of tin snips and cut off the excess from the clamp. With the clamp secure we'll go ahead and route the 4 pole through the 4-Flat mounting bracket and input the cap on the end of our 4 pole.

And there you have it with the installation of tow ready 4-flat connector part number 18144 along with our tow ready universal short bracket part number 18140.


Questions and Comments about this Video

add comment

Info for these parts were:

Test Fit:
Joe V
Test Fit:
Nicholas E
Test Fit:
Shane T
Test Fit:
Robert C
Video Edited:
Zack K
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Dustin K
Video Edited:
Chris R
Installed by:
Jeff D
Video by:
Kathleen M
Video by:
Alan C
Video by:
Jonathan Y

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.