How to Pick Out Replacement Hub for 2016 Magic Tilt Trailer
Question:
I need to replace the Hub plus associated parts for a 2016 Magic Tilt trailer. The trailer hold a 23 foot boat with two axles and 4 tires/ One of the hubs is totally destroyed including the bearing and parts The hub is 6.5 inches wide It has 5 lugs measuring across two furthest lugs they are just about 4.5 inches apart. It has 15 inch tire The axle is tapered. The seal inside diameter is 1 and 5/8 inches The inside axle diameter is 1 and 3/8 inches The outside axle diameter is 1 inch The hub itself is 4.5 inches thick Im looking for a replacement hub that includes all the pieces including the grease cap.
asked by: Chris B
Expert Reply:
In order to pick out the correct hub assembly for a trailer you are going to need know a few key pieces of information. The first thing you will need to know is the bolt pattern of your hubs. This is so you get a hub that is compatible with your wheels. I attached an FAQ article on determining bolt pattern for you to check out.
Next thing you will need to know is what spindle you have on your trailer. In order to do that you can either get the inner and outer bearing numbers from a hub or use a dial or digital caliper to get exact measurements of the spindle. The measurements needed are the parts of the spindle where the bearings ride. The seal dimension you listed is a little too big for being a standard size so getting a more exact dimension would be required. Hopefully it's actually 1.73 inches. Then a hub like the part # Q-HUB84545 would most likely fit as the rest of the dimensions you listed seem pretty close to what this would fit.
If you get back to me with that information I will help you pick out the right hub assemblies. Or, you can follow the link I attached that will take you to the page that has all of our replacement hubs.
You would want to first select the bolt pattern that you have, next select the inner bearing you have, followed by selecting your outer bearing, and then all the correct hubs will be listed.
Products Referenced in This Question
Kodiak Trailer Hub for 3,500-lb Axles - 5 on 4-1/2 - Galvanized Steel
- Trailer Hubs and Drums
- Hub
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Kodiak
more information >
Product Page this Question was Asked From
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Karrier ST175/80R13 Radial Trailer Tire with 13" Galvanized Wheel - 5 on 4-1/2 - Load Range D
- Shop: CE Smith Trailer Idler Hub Assembly w/ Case for 2.7K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Video: Spindle Grease Seal Set for L44643 Inner Bearing and 1.980 Bearing Buddy Spec Review
- Shop: Spindle Grease Seal Set for L44649 Inner Bearing and 1.980 Bearing Buddy
- Shop: Suspension Enhancement
- Video: In-Depth Review of the CE Smith Trailer Idler Hub Assembly w/ Case for 2.7K Axles
- Shop: Spindle Grease Seal Set for L44643 Inner Bearing and 1.980 Bearing Buddy
- Shop: CE Smith Trailer Hub Assembly w/ Carrying Case for 2,700-lb Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Double Lip Grease Seal - ID 1.249" / OD 1.983" - Qty 1
- Video: A Closer Look at the Dexter Trailer Hub and Drum Assembly
- Video: Ultimate Overview of the Timken Replacement Bearing and Race Set
- Shop: Curt Safety-Chain Loops for Gooseneck Hitches on 5th Wheel Rails - 20,000 lbs
- Search Results: 34823
- Search Results: hub grease seal
- Q&A: Grease Used in CE Smith Pre-Greased Hub CE13110
- Search Results: safety chain loops
- Search Results: trailer hub assembly
- Shop: Gooseneck Hitch
- Search Results: bearing seal puller
- Search Results: timken l44649
- Q&A: Replacing Trailer Axle Spindle From Older Short Spindle To BTR E-Z Lube Spindle
- Q&A: Replacing Short Hubs On A 1996 EZ Loader Trailer With Straight Spindles
- Q&A: Can I Use Hubs with 3500-lb Capacity on Axle with 1750-lb Capacity If The Bearings Match Up?
- Q&A: Hub Recommendation for Trailer with 2,700 lb Axle Capacity
- Q&A: Is Weight Capacity Listed On Trailer Hubs The Capacity Of The Trailer Or Axles
- Q&A: How to Pick Out Replacement Hubs for a Boat Trailer
- Search Results: galvanized hub
- Video: Feature Breakdown: Trailer Spindle Nut 1"