How to Setup Curt Friction Sway Control on Trailer
Published 09/10/2015
Question:
How to adjust the bolt on the bottom and the lever on the top to get the right amount of friction?
asked by: Hoyt A
Expert Reply:
The handle is actually the on/off switch for the unit and the bolt under the handle is the tension adjustment bolt. You will need to turn the On/Off handle clockwise (tighter) until the handle will stay firmly in place parallel with the main body of the sway control.
Start out setting the sway control by testing with the adjustment bolt at the factory preset level of friction. You will need to perform a series of road tests with the loaded trailer. If there is not enough sway control adjust the tension bolt 1/4 turn clockwise (tighter) if there is too much tension adjust the tension bolt counter clockwise (looser) 1/4 turn. On subsequent trips increase or decrease tension by turning the adjusting bolt in 1/4 turn increments until the desired level of sway control is achieved.
A couple of things you should also be aware of are that you should never have the handle in the on position when backing a trailer and the unit should be turned off when driving in slick conditions.
Product Page this Question was Asked From
Curt Friction Sway Control for Weight Distribution Systems
- Weight Distribution Hitch
- Sway Control Only
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Search Results: curt sway bar
- Search Results: weight distribution hitch
- Shop: Replacement Wooden Toilet Seat with Slow Close Lid for Dometic Part-Timer RV Toilets - White
- Search Results: anti~sway bars
- Search Results: rv wax
- Search Results: trailer hitch ball mount
- Search Results: sway control bar
- Search Results: sway control only
- Shop: Curt Friction Sway Control for Weight Distribution Systems
- Shop: Curt TruTrack 2P Trunnion Weight Distribution System w/ Sway Control - 7-Hole Shank - 12K GTW
- Video: Review of Dometic RV Accessories and Parts - Soft Close Toilet Seat and Lid - DOM83FR
- Shop: Advent Air RV Air Conditioner - 15,000 Btu - Ducted or Non-Ducted - Black - R32 - AC Unit Only
- Video: A Closer Look at the Advent Air RV Air Conditioner
- Q&A: How to Properly Set the Tension on the Curt Sway Control Bar # 17200
- Shop: GE Appliances Deluxe Plus RV Air Conditioner - 15,000 Btu - Ducted/Non-Ducted - R32 - AC Unit Only
- Article: Trailer Wiring Diagrams
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: How to Choose a Trailer Brake Controller
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Q&A: Does etrailer Carry Furrion Chill Cube w/ Heat Pump to Replace Dometic Duo-Therm
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Best Suspension Upgrade for 33" Tandem Axles: Road Armor vs Dexter EZ Flex for Ember 22ETS
- Video: Redarc Tow-Pro Liberty Brake Controller Review RED24FR
- Shop: Brake Controller
- Article: 5 Things to Know About Weight Distribution Hitches
- Q&A: Can Furrion Chill Cube Operate With RV Furnace
- Video: What to Know About the Curt TriFlex NEXT Trailer Brake Controller
on Weight Distribution Hitch
