Compatibility of Dexter and Titan Brake Assemblies

Question

Question:

I have a boat trailer with Dexter 12x2 hydraulic uni-servo? or free backing brakes. Will the Titan T4489500 brake kit fit ok as long as the bolt pattern is correct? Or do I need to get Dexter brakes to assure compatibility. Thanks.

asked by: Scott C

0

Expert Reply:

No worries about the compatibility. Since the assemblies are the same size and the bolt patterns are identical, the Titan Galphorite Free-Backing Hydraulic Trailer Brake Assembly, part # T4489500 will work great on your boat trailer.

expert reply by: Mike L

0

Answer 1

Hey Michael! We are still carrying Draw-Tite hitches. However, their parent company had some legal problems and went bankrupt so the brand is for sale right now. Most of their products are currently out of stock, so you won't find them on our…

view full answer...

Answer 2

I recommend installing our etrailer Trailer Hitch Receiver #e29AR on your 2008 Ford Ranger 4x4 with the 4.0L 6 cylinder engine. The frame mounted receiver may require the drilling of 2 additional holes as Ford did not drill these holes in every Ford…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 7

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 8

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 9

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 10

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 11

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 12

Hello Sam; that is a great question! I reached out to Furrion and you will be able to use the Furrion Chill Cube #FR69TD (white) or #FR49TD (black) with your furnace. However, the remote is not capable of operating the furnace at this time. Also, we…

view full answer...

Compatibility of Dexter and Titan Brake Assemblies

Product Page this Question was Asked From

Continue Researching