What is the Distance Between the Mounting Holes on Westin MAX Bull Bar # 46-43635

Question

Question:

I have the 2015 Jeep Wrangler Unlimited Hard Rock Edition that comes with the 10th anniversary steel bumpers. I was planning to drill two mounting holes into the front bumper to mount this bull bar. I need to know how far apart the mounting holes are, so I can make sure it clears the tow hooks.

asked by: Jee

1

Helpful Expert Reply:

I went out to our warehouse and pulled Westin MAX Bull Bar # 46-43635 to measure it for you. The center to center distance between the mounting holes is 31-1/4 inches. And the space between the 2 ends is 28 inches at the bottom. I have included a picture showing these measurements for you.

expert reply by: Michael H

1

click to enlarge

Answer 1

The Curt Wiring Harness #C56434 is confirmed to fit all models of the 2021 Toyota RAV4. Your RAV4 Prime does fall into that fit. This will give you a 4-way flat connector for towing small trailers or using Auxiliary Lights #C53201 with your hitch…

view full answer...

Answer 2

The Curt Trailer Hitch Receiver - Custom Fit - Class V Commercial Duty - 2-1/2" #C15802 has 3 different hole dimensions for mounting. The two holes closest to the receiver are 36.31 inches on center. The widest holes are 37 inches on center and…

view full answer...

Answer 3

The 34 inch from outside to outside is a cab and chassis frame will allow for a few hitch fits. I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class V Commercial Duty - 2-1/2" #C15800. This has dimensions to fit your frame. I've…

view full answer...

Answer 4

I reached out to my contact at Curt and was able to get a dimension sheet for the Curt Trailer Hitch Receiver - Class V #C15810 referenced in your question. I have attached an image of it for your review. This trailer hitch is designed to fit select…

view full answer...

Answer 5

The drop of the Curt Class V #C15810, which is the distance from the top of the hitch crossbar to the underside of the vehicle frame where the hitch mounting flanges attach to the vehicle is 5.63 inches. The distance from the face of the receiver to…

view full answer...

Answer 6

The difference is that Curt trailer hitch #C15845 is designed to fit cab and chassis style trucks and #C15810 is designed to fit regular pickup truck models. Cab and chassis trucks are the ones you might see on a lot that do not have a bed on them.…

view full answer...

Answer 7

The width of your frame indicates that your 2012 Ford F-450 is most likely a cab and chassis model which has the frame width a few inches than a standard truck bed. But if you can measure the distance between the mounting holes on the frame of your…

view full answer...

Answer 8

The Curt Trailer Hitch Receiver part #C15400 and the Curt Trailer Hitch Receiver part #C15800 are the exact same trailer hitch save for one has a 2" receiver tube opening and the other a 2-1/2" receiver tube opening. The dimensional drawing…

view full answer...

Answer 9

I went out to the warehouse to take some measurements of Curt trailer hitch #C14082. I made a picture showing the measurements for you. The bolt holes, starting from the one furthest forward on the vehicle, measures 2-3/4 inches to the center of the…

view full answer...

Answer 10

As we have not had a 1973 Ford F-100 in our shop to test fit the available receivers I can only give you the measurements from one of our receivers so that you can see where it will sit on your truck. The Curt Trailer Hitch Receiver #C14082 is…

view full answer...

Answer 11

From side to side, the mounting holes measure 31-1/4 inches apart, center to center. All three sets of holes are the same distance apart. From rear to front, beginning at the rear of the vehicle the distance from the first set of holes to the second…

view full answer...

Answer 12

I have attached for you below a detailed dimensional drawing of the Curt Trailer Hitch Receiver part #C15800 which is a confirmed fit for the vehicles listed below. The trailer hitch has a class V rating with 2-1/2" opening which is great for…

view full answer...

What is the Distance Between the Mounting Holes on Westin MAX Bull Bar # 46-43635

Product Page this Question was Asked From

Continue Researching