Can 215/75-14 Tires Be Used To Replace 205/75-14 Tires On Boat Trailer

Question

Question:

I have a 4 wheel easy loader boat trailer with 205 75 14 tires. Can I upgrade to a 215 75 14 tire?

asked by: William K

0

Expert Reply:

When changing tire size, the most important thing you need to know is the size of the wheel and if it designed to handle the different tire.

A 205/75-14 tire like part # AM1ST86 will work on 14 inch wheels that are 5, 5-1/2, 6, or 6-1/2 inches wide.

If you decide to change to a tire that is 215/75-14 like part # AM10229, this tire will fit wheels that are 5-1/2, 6, 6-1/2, and 7 inches wide. This is a load range C radial tire with a load capacity of 1,870 lbs at 50 psi. I have attached a product review video for this tire you can check out.

If you do decide on the 215 tire, the difference in height is very minimal so you should have no problem, but you will want to replace all of the tires at one time to make sure they are evenly balanced.

expert reply by: Jeffrey L

0

Answer 1

Hi Brian, If you have a boat trailer with a 7,000 lb single axle you wouldn't have 10 inch brakes, they would be larger as 10 inch brakes are for 3,500 lb axles. Since I'm not 100% sure what you have I can't directly answer your question,…

view full answer...

Answer 2

That is an extremely good question, Jim. The DeeMaxx Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Maxx Coating - 3,500 lbs #DE66YR is indeed two of the #DE89YR put together to make ordering for one axle easier. That said, I have no idea why we…

view full answer...

Answer 3

Your surge coupler will have either a sticker or an engraving on it, typically near where the coupler is located. If you can get me that information and what you're needing to replace on it I'd be more than happy to help you find what…

view full answer...

Answer 4

The Kodiak Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Stainless Steel - 3,500 lbs #K2R35S will require upgrading your wheels to 14 inch. You can then use the Karrier ST205/75R14 Radial Trailer Tire with 14" Galvanized Wheel - 5 on 4-1/2 -…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 8

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 9

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 10

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 11

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6 inch whereas the 225/75-15 fits widths that are 5 inch to 6-1/2 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 12

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...