Difference Between Bulldog Square Sidewind 10,000 Lb Weld-On Landing Gear Trailer Jacks

Question

Question:

What is the difference between BD18280 and BD182805? Thanks

asked by: Richard W

0

Expert Reply:

The Bulldog Square Jack, part # BD182800 and part # BD182815 are very similar but have just a couple of slight differences.

They are both 26 inch lift jacks with a 10,000 lb weight capacity, and are sidewind jacks.

The # BD182800 has a side-facing plunger pin and has a 27-2/5 inch retracted height.

The # BD182815 features a front-facing plunger pin and when retracted has a height of 28-1/2 inches.

As you can see there are a couple of differences.

expert reply by: Jeffrey L

0

Answer 1

Based on my research your existing Holland 4800SL jack is very similar to the Bulldog Square Jacks like #BD182815. This particular jack can be used with the Bulldog Powered-Drive Kit #BD1824200100 to convert it to a quiet, electrical system that…

view full answer...

Answer 2

Hello Marcy, thanks for reaching out. We do have a good replacement option for you. Take a look at the Bulldog Square Jack #BD182804. This has a 27-3/8" retracted height and extends out to 39-1/2". It has a 10K lift capacity and 12K support…

view full answer...

Answer 3

I spoke to my contact at Bulldog who said that the Model 12, 180 Series Bulldog jack that you have is the older version of the the current 10K jacks like part #BD182500. Since you have the older version without the spring that you mentioned seeing in…

view full answer...

Answer 4

It sounds like you are looking for parts to flat-tow a 2019 Chevrolet Silverado 3500 and if that's the case then yes this is possible and we have everything you need for this. I have attached a full, comprehensive list for you below with…

view full answer...

Answer 5

I spoke to my contact at Bulldog and he informed me that the Replacement Screw and Nut Kit #BD500217 would work for your 180 Series Bulldog 12k Jack.

view full answer...

Answer 6

We do sell replacement screw and nut assemblies for Bulldog Jacks. Item #BD500250 fits Bulldog Jacks rated at 10,000-lb lift, 12,000-lb support. It has a rod diameter of 1-1/4 inches. We also offer Item #BD500217, which is designed for use with…

view full answer...

Answer 7

For your Peterbilt 335 Expedite straight truck, I recommend the Bulldog Square Jack - Drop Leg w/ Spring Return - Sidewind - 12-1/2" Lift - 10,000 lbs #BD182804. This jack is 27-3/8 inches retracted and 39-7/8 inches extended. It has a drop-leg…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 11

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Difference Between Bulldog Square Sidewind 10,000 Lb Weld-On Landing Gear Trailer Jacks

Featured Help Information

Miscellaneous Media

Continue Researching