Recommended Landing Gear for Peterbilt 335 Expedite Straight Truck

Question

Question:

need help to determine which landing gear i need for a peterbilt 335 expedite straight truck

asked by: Kevin D

0

Expert Reply:

For your Peterbilt 335 Expedite straight truck, I recommend the Bulldog Square Jack - Drop Leg w/ Spring Return - Sidewind - 12-1/2" Lift - 10,000 lbs # BD182804. This jack is 27-3/8 inches retracted and 39-7/8 inches extended. It has a drop-leg travel of 13-1/2 inches.

expert reply by: Jason S

0

Answer 1

It sounds like you are looking for parts to flat-tow a 2019 Chevrolet Silverado 3500 and if that's the case then yes this is possible and we have everything you need for this. I have attached a full, comprehensive list for you below with…

view full answer...

Answer 2

The Bulldog Square Jack, part #BD182800 and part #BD182815 are very similar but have just a couple of slight differences. They are both 26 inch lift jacks with a 10,000 lb weight capacity, and are sidewind jacks. The #BD182800 has a side-facing…

view full answer...

Answer 3

Hey Jordan! Based on your measurement you have a Lippert 1116 or 1716. If you want to confirm that feel free to send me the S/N on your pin box. The Gen-Y Nomad you were looking at is for the Rhino Box so that is not a fit. What you need is the Gen-Y…

view full answer...

Answer 4

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 7

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 8

Hey Lucian! There are definitely a lot of options out there, and the best is usually a mix of parts from different manufacturers. We don't have a package under a single part number but I can give you a list of parts for a complete setup. I…

view full answer...

Answer 9

Gladly! The difference between the Blue Ox Patriot 3 Radio Frequency, Portable Braking System BRK2019 and the Blue Ox Patriot Radio Frequency, Portable Braking System #BLU37TR is that the Blue Ox Patriot 3 RBRK2019 is older, no longer available, and…

view full answer...

Answer 10

Hi Arthur, I took a look at your list of parts to flat tow your 2026 Jeep Wrangler Rubicon and it looks like you have almost everything you need! For the Blue Ox Patriot Supplemental Braking System part #BLU37TR, it plugs directly into a 12V outlet…

view full answer...

Answer 11

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 12

Yes, it will since your truck is a 2022! The 5" Offset Gen-Y Hitch Gooseneck Trailer Hitch item #GY55XR is designed to work in the 2020 and newer Silverado and Sierra's with the GM factory puck system. It will push the connection point for…

view full answer...

Recommended Landing Gear for Peterbilt 335 Expedite Straight Truck

Featured Help Information

Miscellaneous Media

Continue Researching