Size of the Bolts Used to Install a Hitch on a 2015 Dodge Grand Caravan

Question

Question:

I purchased a hitch for my 2015 Dodge Caravan. I lost the bolts to hold it to the car. Can you please tell me the size / thread / etc so that I may purchase replacements, or do you sell them?

asked by: Preston

0

Expert Reply:

The bolts used to install a hitch like the part # 13364 are the existing bolts that came on your 2015 Dodge Grand Caravan. The two sizes of the bolts are M10 CL10.9 and M12 CL10.9.

expert reply by: Jameson C

0

Moud

6/18/2025

So, I installed hitch on my 2014, and after I put the bolts back, on Passenger side the M10 CL10.9 snapped. I managed to get it out, but now the hole is big and new bolt won’t hold to anything. It’s looks like there was a nut or something, but I can’t see anything now. What should I do?

Jameson C.

6/18/2025

@Moud If the weld nut was destroyed you'd need to fishwire in a new nut and spacer. It's an odd process but I attached a video to this message that shows how it's done.

Helpful Links

tv-fish_wire.aspx

Moud

6/18/2025

@JamesonC Thanks for your reply. When I hit the attached video, it shows a lot of them. Any specific one helps with my problem?

Jameson C.

6/18/2025

@Moud Looks like they deleted that video but I found a similar one we put up on youtube: https://www.youtube.com/watch?v=-CgvvVEKQi8&pp=ygUYZXRyYWlsZXIgZmlzaHdpcmUgaG93IHRv

Answer 1

When installing The etrailer hitch #e98854 onto your 2016 Chrysler Town and Country it uses the existing M10 and M12 bolts that should be present on your vehicle. Since your hardware is missing you will need to contact your vehicle's dealership…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 6

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 7

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Size of the Bolts Used to Install a Hitch on a 2015 Dodge Grand Caravan

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching