What is the Correct Bearing Kit for a Dexter Hub and Drum Assembly 8-219
Updated 03/03/2015 | Published 03/02/2015
Products Featured in This Question
Question:
I checked the bearing numbers and they seem to match but can you tell me if this is the correct kit for a Dexter 8-219 hub? Thank You
asked by: Craig K
Expert Reply:
There are a few different types of 8-219 hubs, some that take a 2-1/4 inch inner diameter seal and some that take a 2-1/8 inch inner diameter.
The bearing kit # BK3-200 you referenced will work with the trailer hub and drum assembly 8-219 as long as the seal diameter is 2-1/4 inches. Check the part numbers on your bearings so you can match them to the correct kit.
If your spindle diameter measures 2-1/8 inches where the seal rides using a digital caliper, the bearing kit you need is # BK3-210. See the diagram I included.
I included a helpful article and video reviews for you too.
Product Page this Question was Asked From
Bearing Kit, 14125A/ 25580 Bearings, 10-36 Seal
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing 14125A and 25580
- Race 25520 and 14276
- 7000 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: 8x65 wheel
- Search Results: 8219~hub
- Search Results: valve stem
- Search Results: wheel covers hubcaps
- Search Results: 8x65 wheels
- Shop: Dexter Trailer Hub & Drum for 5,200- to 7,000-lb Axles - 8 on 6-1/2 - 9/16" Studs - Pre-Greased
- Q&A: Recommended Hub, Drum, and Brakes for a Logan Horse Trailer W/ 7K Axles
- Search Results: wheel caps
- Search Results: 8~219
- Shop: Vesper Steel Modular Trailer Wheel - 16" x 6" - 8 on 6-1/2 - Silver
- Shop: Dexter Trailer Hub and Drum Assembly for 5,200-lb to 7,000-lb E-Z Lube Axles - 12" - 8 on 6-1/2
- Shop: Trailer Hub and Drum Assembly - 7,000-lb Axles - 12" Diameter - 8 on 6-1/2 - Pre-Greased
- Shop: Dexter Trailer Hub and Drum Assembly for 5,200-lb to 7,000-lb Axles - 12" - 8 on 6-1/2
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Shop: DeeMaxx Trailer Wheel Lug Nut - Stainless Steel - 1/2" - Qty 1
- Video: Checking Out the Americana Metal, Bolt-In Valve Stem
- Video: A Closer Look at the Dexter Trailer Hub & Drum for 5,200- to 7,000-lb Axles
- Video: In-Depth Review of the Americana High Pressure Rubber Snap-In Valve Stem
- Video: The Low-Down on the Americana High Pressure Rubber Snap-In Valve Stem
- Q&A: Replacement Hub Recommendation for Hub Stamped 8-219
- Video: Hands-On with the Dexter Trailer Hub & Drum for 5,200- to 7,000-lb Axles
- Article: Most Popular Wheel Bearings
- Q&A: Is My OEM Brake Controller in My 2020 GMC 2500 HD Diesel Compatible with Electric Over Hydraulic?
- Article: Electric Trailer Brakes: How They Work & What to Buy
- Q&A: Looking For EOH Disc Brake Conversion kit For 2018 Montana 3820FK
- Q&A: Parts Needed to Add Disc Brakes to 2018 Keystone Montana 3121RL
- Q&A: What Brakes and Bearings do I Need for My PJ Dump Trailer with Tandem 7K Axles?
- Q&A: Replacement Bearings, Races, and Seals for a Dexter Number 297697 7K Axle
- Article: Trailer Wiring Diagrams
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)