Replacement Hub Recommendation for Hub Stamped 8-219
Published 11/11/2016
Question:
The hub I need says: 8-219 MTA6 340 I really need lugs and lug nuts but will take entire hub.
asked by: Jeff C
0
Expert Reply:
Since you said your hub says 8-219 that would indicate that you need the Dexter hub part # 8-219-13UC3 as a replacement. This is a hub for higher capacity axles between 5,200 and 7,000 lbs and has a bolt pattern of 8 on 6-1/2 inches.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Dexter Trailer Hub & Drum for 5,200- to 7,000-lb Axles - 8 on 6-1/2 - 9/16" Studs - Pre-Greased
- Trailer Hubs and Drums
- Hub with Drum
- Pre-Greased
- Standard
- 25580 / 14125A
- Standard Grade
- For 5200 lbs Axles
- For 6000 lbs Axles
- For 7000 lbs Axles
- 9/16 Inch Stud
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: 8x65 wheel
- Search Results: 8219~hub
- Shop: Dexter Trailer Hub & Drum for 5,200- to 7,000-lb Axles - 8 on 6-1/2 - 9/16" Studs - Pre-Greased
- Search Results: wheel covers hubcaps
- Search Results: 8x65 wheels
- Search Results: valve stem
- Q&A: Recommended Hub, Drum, and Brakes for a Logan Horse Trailer W/ 7K Axles
- Search Results: torsion axle
- Search Results: 8x65
- Shop: Dexter Trailer Hub and Drum Assembly for 5,200-lb to 7,000-lb E-Z Lube Axles - 12" - 8 on 6-1/2
- Shop: Vesper Steel Modular Trailer Wheel - 16" x 6" - 8 on 6-1/2 - Silver
- Shop: Dexter Trailer Hub and Drum Assembly for 5,200-lb to 7,000-lb Axles - 12" - 8 on 6-1/2
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Shop: Trailer Hub and Drum Assembly - 7,000-lb Axles - 12" Diameter - 8 on 6-1/2 - Pre-Greased
- Shop: DeeMaxx Trailer Wheel Lug Nut - Stainless Steel - 9/16" - Qty 1
- Video: A Closer Look at the Dexter Trailer Hub & Drum for 5,200- to 7,000-lb Axles
- Video: Checking Out the Americana Metal, Bolt-In Valve Stem
- Video: The Low-Down on the Americana High Pressure Rubber Snap-In Valve Stem
- Video: In-Depth Review of the Americana High Pressure Rubber Snap-In Valve Stem
- Q&A: What is the Correct Bearing Kit for a Dexter Hub and Drum Assembly 8-219
- Video: Hands-On with the Dexter Trailer Hub & Drum for 5,200- to 7,000-lb Axles
- Shop: Suspension Enhancement
- Video: A Closer Look at the Dexter Trailer Hub and Drum Assembly
- Video: In-Depth Review of the Timbren Rear Suspension Enhancement System-TDR1525H4
- Q&A: Do Trailer Drums have to be Turned when Replacing Electric Trailer Brake Assemblies
- Q&A: How To Determine the Correct Size Lug Nuts For a Trailer
- Article: Overview of Lubricating Grease
- Q&A: How to Measure for Selection of the Correct Bearing Buddy Bearing Protectors
- Q&A: What Is The Recommended Lug Nut Torque On 7,000lb Axles?
- Q&A: Greasing Bearings and Hub for Dexter EZ Lube Hub and Drum for 5.2K to 7K Axles, 8 on 6-1/2