bing tracking image
  1. Trailer Lights
  2. Optronics
  3. Clearance Lights
  4. ID Bar
  5. LED Light
  6. Red
LED Identification Light Bar for Trailers over 80" Wide - Submersible - 9 Diodes - Red Lens
Optronics

LED Identification Light Bar for Trailers over 80" Wide - Submersible - 9 Diodes - Red Lens

Part Number: MCL93RB
$33.63
Retail:$41.39
You Save: 19%
Trailer Lights
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
This waterproof identification light bar with 3 lights is 15-15/16" long and designed for trailers wider than 80". Durable polycarbonate housing and lens. Surface mounts to trailer - hardware not included. 2-Wire design. DOT approved. Great Prices for the best trailer lights from Optronics. LED Identification Light Bar for Trailers over 80" Wide - Submersible - 9 Diodes - Red Lens part number MCL93RB can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (452)
  • Q & A (0)
  • Photos

Optronics Trailer Lights - MCL93RB

  • Clearance Lights
  • ID Bar
  • LED Light
  • Red
  • 15-15/16L x 1-1/2W Inch
  • Surface Mount
  • Rear Clearance
  • Submersible Lights
  • Optronics

This waterproof identification light bar with 3 lights is 15-15/16" long and designed for trailers wider than 80". Durable polycarbonate housing and lens. Surface mounts to trailer - hardware not included. 2-Wire design. DOT approved.


Features:

  • LED trailer light functions as an identification light bar for trailers wider than 80"
    • 3 Optronics AL91 series lights are replaceable (AL91RB - sold separately)
  • Sonically sealed, waterproof housing and lens unit is submersible
  • LEDs make great replacements for incandescent lights
    • Last 50 times longer
    • More efficient - provide brighter light with less power output
    • No bulbs to replace - no brittle filaments
  • Durable polycarbonate lens and housing
  • Red lens over white LEDs
  • Surface mounts on trailer - hardware not included
  • 2-Wire design includes power lead and ground wire
  • DOT compliant


Specs:

  • Dimensions: 15-15/16" long x 1-1/2" tall x 1-5/8" thick
  • Distance between mounting holes (center on center): 7-1/2"
  • Diodes: 9
  • Power draw at 12.8V: 0.153 amps
  • Wire length: 50"
  • LIfetime warranty on LEDs


Optronics MCL93 Series LED Identification Light Bar for over 80 Inch Wide Trailers

Sonically Sealed, Waterproof Trailer Light

The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.



MCL93RB Sealed 3-Piece LED Identification Light Bar - Red, 9-diode 0.153A/12.8V

Alternate part number: MCL-93RB




California residents: click here


Customer Satisfaction Score:


Customer Reviews

LED Identification Light Bar for Trailers over 80" Wide - Submersible - 9 Diodes - Red Lens - MCL93RB

Average Customer Rating:  4.8 out of 5 stars   (452 Customer Reviews)

This waterproof identification light bar with 3 lights is 15-15/16" long and designed for trailers wider than 80". Durable polycarbonate housing and lens. Surface mounts to trailer - hardware not included. 2-Wire design. DOT approved.

by:

Still just as bright as the day I bought it,and installed on my boat trailer!!!!
Still going strong after a year!!!!
Been under the water many times at boat ramps...... and loving the waterproof light!!!!! Would definitely buy from again!!!!! Thanks do much!!!!

Christopher profile picture

Christopher

3/25/2024

After a year, still holding up Great!!!!! Thanks again, Guys!!!! :



by:

This light has met the need for replacing the old light bar on the rear of my boat trailer. Great visibility from the rear.



by:

All of the items I’ve ordered over the past five years have been as described, always fit as shown and are totally satisfactory in their function and appearance. I design for looks and the variety of lights and videos of how they’ll appear have helped me immensely in the redesign of my classic GT race car’s taillights (and its trailer’s lights too which have arrived and are waiting to be installed).

Bfk profile picture

Bfk

6/12/2019

A year and thousands of miles later, the lights still work flawlessly.



by:

I want to thank you for all your help with my trailer you were more helpful than you realize. So this is my trailer for a 22' Flats Cat shallow draft Catamaran. I totally dismantled my trailer and buffed by hand with a wire buffer and sand blasted in some spots and applied multiple coats of some very expensive galvanize paint (Z.R.C.). I installed all new C. E. Smith Carpet (about 80'), seven new LED waterproof lights, new springs, new equalizers, new tongue jack, new wench, new safety chain, new chain brackets, all new SS hardware and a 35' long wiring harness.
I was able to send only one review with a picture of the safety chain and brackets. I'm having a little trouble with the rest..oh some of these items were bought locally or from your competitors, until I found etrailer. Your prices were cheaper for the exact same things. Your helpful how to videos were helpful. And Rose, your personal helpful knowledge made my buying experience very pleasant, I actually enjoyed talking to you! Thanks to etrailer and specifically to Rose G.



by:

Good product. I just installed it so I can not vouch for longevity. The factory halogen single wire setup on my boat trailer was failing within a year, so I did a complete trailer light overhaul. This light bar is nice and bright, and with it being sealed LEDs SHOULD last quite a while. The plastic does seem a little flimsy, but I bet I won’t have any issues with it unless I somehow smack it into something. Can’t really see the whole light in my photo, but you can see how bright the one light that isn’t hidden by the motor is.

In short, I would recommend this light.



by:

This review is not for the item I ordered rather for the service of the company.I have not had a chance to install or use the product I ordered because I just received it this afternoon, 4 days later than the original delivery date when placing the order. A stated delivery date of 2/9/24 was posted on order page. Then an amended delivery came for 2/11/24. Alas it was delivered today, 2/13/24, too late to install it on my customers trailer. I think you can do better with your shipping delivery dates..



by:

Just received and installed this light today. Replaced 7 year old lights on my utility trailer hoping to not have to mess with light bulbs anymore. The light works as it should, it's nice and bright, arrived in a reasonable time frame, was packaged well, and hopefully will last. I have ordered many items from etrailer and have never had a problem.



by:

Everything worked ok, just was not impressed with the plastic, seems a bit flimsy. However, I was able to secure it to the trailer and after a year it is still holding up.



by:

The light bar worked out great! Nice addition to the back of the trailer.



by:

Working well after 1 year. Lens cover tends to come unseated hear and there but other than that pleased with it.



by:

I changed out all my trailer lights to LED and they work great!



by:

Works great. Two new holes for mounting. Added two photos, old lights and new.



by:

They mounted very nice and look great on the trailer



by:

This Optronics LED light bar is BRIGHT! I decided to upgrade all my 20+ year old incandescent boat trailer lights primarily to eliminate the hassle of replacing bulbs and light modules every year or two. I was extremely pleased to find that in addition to the promise of longer life, they are extremely bright and I feel much safer now when pulling my boat trailer day or night. This one is plastic but it seemed sturdy enough when mounting on back of my trailer.

Martin profile picture

Martin

7/26/2020

After one year going in and out of the water at boat ramps and the trailer being exposed to the elements when not being towed, these lights are still bright and like brand new.



by:

Items arrived as expected. Quick delivery. No issues. Excellent communications



by:

the lights are bright! did have to make new holes into the light plate to accommodate the different spacing of the bolt locations.



by:

Easy to install. The wires was long enough to cut for proper length. They are bright and look really nice.



by:

I like the look and the wiring. They used to be cheaper and metal bar behind. Now plastic and more expensive. Doesn't make sense. lights work well however.



by:

Great Product at great price



by:

great center lamp assembly



by:

Product worked as intended, plastic housing is pretty cheap



by:

These replaced the OEM lights on a Shorlander form 2012. Easy to install and everything looks great.



by:

Exact replacement. Very easy installation. Nice and bright.



by:

Just what I wanted



by:

Great replacement for old or broken light bars... or simple to add for improved visibility. Glad to be able to find this replacement for our ‘old’ / broken one!

Paul profile picture

Paul

12/10/2021

Light bar working well after a year of regular use. Happy with this purchase.


25
452
Show More Reviews

See what our Experts say about this Optronics Trailer Lights

  • Converting Trailer Light Bar from Incandescent to LED Lights
    The code SAE P2 91 DOT on the light lens is the lens rating, not a part number, so it is difficult to go by that number. Often the actual part number for a light will be on the back of the light base or housing. If not, it is usually easiest to go by the dimensions of the light when choosing a replacement like the LED-type # AL191RB. We do offer complete 3-light LED light bars, such as parts # MCL93RB and # MCL97RB, which appear on the linked page with other trailer clearance lights. You...
    view full answer...
  • Trailer ID Light Bar For Trailer Over 80 Inches Wide
    Since your trailer is over 80 inches wide, you do need the three-light ID bar, which is the following part number: - LED Identification Light Bar for Trailers over 80" Wide # MCL93RB
    view full answer...
  • Recommended U-Bolts, Rollers and Boat Trailer Lighting/Wiring for a 1984 Shoreline Trailer
    Thanks for sending us the pictures! Since you are installing a Bolster-and-swivel-bracket assembly part # CE10001G-4 and need a 4-1/8 inch width by 3-1/2 or 4-inch length U-bolt, we currently don't offer a close match. I would recommend going to a local hardware store to locate a U-bolt with the dimensions you need. I would go with a stainless steel u-bolt because it is corrosion resistant and ideal for marine applications. For the lighting and wiring on your 1984 Shoreline boat trailer,...
    view full answer...
    Image 1 for Image 2 for
  • Replacement LED for 2006 ShoreLandr Trailer with Alumacraft Boat
    I have some great LED replacement options for your 2006 ShoreLand'r Trailer with Alumacraft Boat. I have attched a list of these below. Please note, they may not all be exact fit replacements but with a bit of work they will be able to be made compatible no problem. LED Trailer Tail Light part # STL56RB (Passenger) LED Trailer Tail Light part # STL57RB (Driver) Redline Mini Thinline Clearance or Side Marker Light part # LT02-220 LED Identification Light Bar for Trailers over 80" Wide...
    view full answer...
    Image 1 for Image 2 for Image 3 for
  • Lights Needed for 102" Wide x 25' Long Trailer
    The TecNiq Mini LED Trailer Fender Clearance Light # TN78XR can be used even though this isn't a boat trailer, and these can be installed on the sides of your trailer - you don't have to install these only on the fenders. For a complete light setup you need the following: - Optronics Trailer Light Kit for Trailers over 80" Wide # TL16RK - LED Identification Light Bar for Trailers over 80" Wide # MCL93RB I'm also attaching a link to our helpful article on trailer lights for you to check out.
    view full answer...
  • Availability of Trailer Taillight ID Bar that Has LEDs
    The Peterson ID bar part # 428100 is definitely an incandescent light setup but we do have a similar version that has LED lights with the part # MCL93RB like it sounds like you are looking for.
    view full answer...
  • Recommended Trailer Light Kit for a Boat Trailer
    Sounds like you are describing the LED Trailer Light Kit w 25' Wiring Harness # TL16RK. This is a great kit from a great company. Optronics electrical products, including this kit, have received great customer reviews! The only thing that I would change when installing this kit is the quick-splice connectors. Since this will be on a boat trailer that is submerged under water the Deka Heat Shrink Butt Connector # DW05744-10 will hold up much better and do an excellent job at keeping the...
    view full answer...
  • Comparing Optronics Trailer Lights MCL-83 and MCL-93
    The MCL-83 measures 17 inches long overall and 1-1/2 inches deep. It draws 0.141 amps at 12.8 volts. Light MCL-93, # MCL93RB, is 16-1/2 inches long overall and 1-5/8 inches deep. It draws 0.051 amps at 12.8 volts. Both are LED lights just with different measurements and power draw ratings.
    view full answer...
  • Submersible Light Bar Recommendation for Trailer Lighting
    I have a solution for you, but the Peterson Lightbar part # 136-3R that you referenced is not submersible. Instead check out the # MCL93RB which is a very similar light bar that is submersible.
    view full answer...
  • Is Sealed, 3-Light Truck, Trailer Identification LED Light Bar Submersible
    The lights themselves on light bar # MCL93RB are sealed so water cannot get into them. This does make them submersible as well. All sealed lights are submersible but not all submersible lights are sealed. I have linked a video review of this light bar for you.
    view full answer...
  • Amber Version of the Clearance Light part # MCL98RB Availability
    To get an amber, LED version of the part # MCL93RB you would need to order replacement lens part # A91AB and then replace the red lenses with the amber lens. On the front of a trailer you need to have the amber lights displayed and on the back red.
    view full answer...
  • LED Light Kit for Trailer Over 80 Inches Wide
    The "80" you are referring to is the width of the trailer, and it makes it easier to determine the light kit you need. Since you need tail lights as well as running lights, I recommend the Trailer Light Kit for Trailers Over 80" Wide # TL16RK. This will give you the Stop, turn, tail, side marker, rear clearance, side reflector, rear reflector, and license plate light that you need for your trailer. For the light strip with three lights you were referring to you will need the LED Identification...
    view full answer...
  • Trailer Light Kits With Wishbone Wiring And Full Length Ground, Running Lights and Brake/Turn Wires
    The 25 Ft 4-Way Trailer Wiring Harness # A25W2GWB is our only wiring harness with a full length ground, running light and brake/turn signal wire to run down both sides of the trailer. While we do not have this in a kit you will simply need to select the additional lights you will need. For a trailer under 80" wide you will need the following parts. Driver's Side Tail Light # STL9RB qty 1 Passenger's Side Tail Light # STL8RB qty 1 Trailer License Plate Mount Bracket # LP10SB qty 1 Side...
    view full answer...
  • Diameter of Mounting Holes in Optronics MCL93RB LED Identification Light Bar
    The mounting holes for the # MCL93RB ID Light Bar are 3/16 inches in diameter, I'd recommend using 3/16 inch stainless hardware and a 7/16 hole in the trailer frame. Stainless bolts, nuts and washers should be readily available at your local hardware store. If you click the provided link, you can see a product demonstration video for the # MCL93RB Light Bar.
    view full answer...
  • Recommendation For LED Boat Trailer Light Kit For Submersible Applications
    Sounds like you need something like the Submersible Over 80" LED Trailer Light Kit w 25' Wiring Harness, Item # TL16RK. The lights in this kit are sealed and have a waterproof construction. The LEDs are very efficient and last 50 times longer than incandescent bulbs. This kit is for trailers that are over 80 inches so if your trailer is under 80 inches then you can use a similar kit, Item # TLL9RK. Since you want something waterproof that will hold up in salt water, I recommend using...
    view full answer...
  • Checking/Fixing Ground Connection on Trailer LED Light Bar
    From what you describe, it sounds exactly like a ground problem. You'll want to make sure the ring terminal on the ground wire is making contact with bare metal on the trailer frame. If there's paint or corrosion preventing the ring terminal from making good metal-metal contact, you'll only pick up the ground connections through the threads of the ground screw, which sometimes isn't sufficient. To refresh a ground connection, I like to remove the ground screw, sand down the area around...
    view full answer...
    Image 1 for
  • Troubleshooting LED Identification Light Bar With Lenses Easily Knocked Off
    The LED Identification Light Bar for Trailers over 80" Wide - Submersible - 9 Diodes - Red Lens # MCL93RB has the wiring and housing for the individual sealed lights # AL91RB to fit. The only way to help them stay in place a little better is to add silicone around the edges to just add an additional seal that will hold up to vibration and water. An alternative option is to use the LED Identification Light for Trailers Over 80" Wide - 3 Diode - Sealed - Rectangular - Red # MCL98RB which...
    view full answer...
  • LED Identification Light Bar and Trailer Taillight Kit for 2012 Yamaha Trailer
    Yes, both of the LED trailer taillight kits you mentioned would work great on our 2012 Yamaha trailer. The LED Identification Light Bar # MCL93RB and the Optronics LED Combination Trailer Tail Lights # TLL160RK. These are both LED like you are wanting which means more reliable and less amperage draw, can easily fit in place of what you have now, and are submersible too.
    view full answer...
  • Wire Gauge of Sealed, 3-Light Truck, Trailer Identification LED Light Bar # MCL93RB
    The wire gauge of the Sealed, 3-Light Truck, Trailer Identification LED Light Bar # MCL93RB that you referenced is 16 gauge.
    view full answer...
  • Is the Sealed, 3-Light Truck, Trailer Identification LED Light Bar # MCL93RB Street Legal
    Yes, the Sealed, 3-Light Truck, Trailer Identification LED Light Bar # MCL93RB is rated for use as a marker/clearance light at the back of your box truck.
    view full answer...
  • Plug-n-Play Tail Light or Light Bar for Towing
    We have the Heavy Duty Magnetic Tow Lights # TL21RK from Optronics that already uses a 4-Way wiring harness. All you have to do is string the excess wiring over the vehicle that you are pulling and plug the 4-Way from the Magnetic Tow Lights it into the 4-Way at the rear of your tow vehicle. If you are looking for a Light Bar, I recommend going with the Sealed, 3-Light Truck, Trailer Identification LED Light Bar # MCL93RB. You will have to splice this into your current wiring, and this...
    view full answer...
  • Recommended LED Light Bar For The Back of An Enclosed Trailer
    The LED light bar strip I recommend is # MCL93RB. Each strip has 3 LED lights on the base. They are sealed, waterproof and corrosion resistant. Contains both lead wire and ground wire for mounting to all surfaces. The LED light bar strip # MCL93RB is a two wire system meaning you will have one wire with a ring terminal for your ground, and a 50-inch power lead wire. You will connect the white wire to your ground and the brown power wire lead to your power supply.
    view full answer...
  • Recommended Utility Trailer ID Light Bar
    We have what you are after. I have linked the selection we have available. The most common is the LED Identification Light Bar for Trailers part # MCL93RB. This will install to the existing wires you have. I recommend using Heat Shrink Connectors like part # DW05744-5.
    view full answer...
  • Needing Lamp Setup for Ice Fishing Shack on Trailer
    I don't offer a kit that would include everything you mention, but I can suggest a kit to use as a starting point plus the additional lamps to complete your setup. I'd begin with the Optronics Aero Pro LED light kit, part # TL16RK. This provides the wiring harness, two LED taillights as well as two clearance/marker lights. To get the trailer set up the way you're wanting, you'd need an additional 4 of the # MCL-91AK lamps and a # MCL93RB 3-lamp identification bar. These lamps are all...
    view full answer...


< Previous
12



Do you have a question about this Trailer Light?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Cole B
Installed by:
Cole B
Employee Brent H
Installed by:
Brent H
Employee Ryan G
Installed by:
Ryan G
Employee Wilson B
Updated by:
Wilson B
Employee Brian T
Updated by:
Brian T
Employee Noah M
Updated by:
Noah M

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.