See what our Experts say about this Stromberg Carlson Camper Jacks

• Replacement Venture Landing Gear Box for VMC940RB
  For your Venture landing gear you can use # LC276602 or # LG-179015. Either one will work.
  view full answer...
• Stromberg Carlson Landing Recommendation to Replace Damaged RBW Landing Gear
  Our understanding here is that AL-KO manufactured the RBW jacks and that they stopped offering replacement parts for their landing gear. It looks like your best option would be to replace your current landing gear with the Stromberg Carlson Electric Landing Gear # LG-1 that you referenced.
  view full answer...
• Landing Gear Replacement Recommendation for 1997 Fleetwood 5th Wheel w/ RBW Landing Gear
  Since your landing gear is made by RBW none of the setups we offer are going to allow you to reuse your motor. The dimension of 15-1/2 inches between the brackets on your landing gear means nearly every landing gear set is going to fit your trailer as that is the standard dimension. For a powered Lippert landing gear that would bolt right up we have the part # LG-1 or for the manual crank we have the part # LG-183708.
  view full answer...
  
• Replacement Landing Gear for 2008 Jayco Eagle Fifth Wheel with Atwood Legs
  Since Atwood is no longer around and we can't get their replacement lead and follow jacks your best option will be to replace the entire landing gear set like with the similar # LG-1 for a powered set or part # LG-183708 for a manual set. These kits will install with the same brackets as what your trailer has currently so it will be an easy install.
  view full answer...
• Replacement Landing Gear for Atwood Set that is on 1998 Jayco
  Hey Brian, I would recommend just starting totally over with a new landing gear set like the Stromberg Carlson part # LG-1. At one point there was some confusion on whether or not the Atwood landing gear components were interchangeable with the other brands like Lippert, LCI, Venture, Stromberg etc. so while your old motor MIGHT work there's a big enough risk it wouldn't that I wouldn't go that route. This also gives you all new components so wouldn't have to worry about having to replace...
  view full answer...
• Replacement Landing Gear for 2016 Starcraft Fifth Wheel with Atwood Set
  I really wish we had parts for the Atwood landing gear sets still but we no longer carry them since the company is is out of business.
  view full answer...
• Troubleshooting 5th Wheel Landing Gear That Retracts But Wont Extend
  It could be some internal parts but it could also be the electrical system itself. The easiest way to know if the internal parts are the issue or not is to use the manual override to see if it will extend and retract without any electricity. If it does then you'll want to check your electrical connections but if it doesn't then it's something internal and you'll need to take the jack apart to see what needs to be replaced. Should you decide to replace your landing gear I recommend checking...
  view full answer...
  
• What is the Distance Between Weld Stops on Stromberg-Carlson Landing Gear Set LG-1
  The weld stops on the legs of Stromberg-Carlson landing gear set # LG-1 are indeed 17-1/2 inches measured from the top of the top one to the bottom of the bottom one. If you look at the diagram I have included you will see that they have measured from the top of one to the top of the other and that is 16-1/2 inches. Since the weld stops are 1 inch tall the measurement is 17-1/2 inches just like what you need!
  view full answer...
  
• Availability of Replacement Lead Jack and Parts for Stromberg Carlson 5th Wheel Landing Gear # LG-1
  The jack with the motor is referred to as the lead jack, while the other jack is called the follower. Since the jack on the motor side is in need of replacement, you would need the lead jack. The lead jack is not terribly difficult to replace. You would need to disconnect the drive rod that connects the two legs, remove the lead jack, install the replacement lead jack, and pull the motor and gearbox off the defective jack and install on the replacement. If you were using the Stromberg...
  view full answer...
• Replacement Drop Leg for 2017 Heartland 328RE Sundance
  In order to get the correct replacement drop leg you will need to know the manufacturer and model of your current landing gear because they do need to match in order to keep your Heartland Sundance level. For example, the Replacement Lead Jack w/ Drop Leg # LG-179013 is designed for use with Stromberg Carlson models # LG-1, # LG-3, and # LG-183708. I've added a link to our page with out selection of landing gear for you to take a look at.
  view full answer...
• Replacement Crank Handle Connection for Landing Gear on 2005 Fleetwood Prowler
  Thanks for reaching out, Gary! What landing gear set do you have? For something like the Stromberg Carlson Electric Landing Gear Set # LG-1 you were looking at, you'd need the Aluminum Gearbox # LG-179015 as that's what the Crank Handle # LG-119226 connects to, but it sounds like you may have a different setup. Let me know and I'll be happy to see if we have a way to help you out!
  view full answer...
• Info Needed to Replace Landing Gear of Older Camper
  So there isn't a way to look up replacement landing gear by the VIN of the trailer or by the year/make/model. Best option would be to find a brand or part number if you can on them and we can go from there to see if there's a set that will bolt right up. Worst case scenario you could have a new set of brackets welded and you'd could install a set like the part # LG-1.
  view full answer...
• Replacement Landing Gear and Equalizers for a 2008 Keystone Cougar 5th Wheel
  Thanks for the pictures! Based on the weight of your 2008 Keystone Cougar 5th Wheel, you will want the item # LG-1 landing gear set. You are going to want to measure to be sure this is the right size for you. The two things you will want to measure will be the distance of the black outer tube of the jack and the distance between the frame clamps (this measurement can differ depending on where the weld stops are located). You'lll need to measure from the underside of top bracket to top of...
  view full answer...
  
• Landing Gear Replacement for Trailer with Atwood Jacks
  The picture you submitted shows the motor (MPD 71119 ) for a standard Atwood landing gear jack set like the Stromberg Carlson kit part # LG-1. If you are wanting a direct replacement you would want the part # LG-1 as Atwood is no longer in business and this set is made to same specs.
  view full answer...
  
• Recommended Replacement For Atwood MPD 71125 Landing Gear
  The best option to replace your Atwood MPD 71125 landing gear is from Stromberg Carlson, which is going to fit in your current mounting brackets, so all you have to do is choose the weight capacity that is right for your trailer, either 5,500 or 6,500 lbs: - 5,500 lbs: Stromberg Carlson Electric Landing Gear Set # LG-1 - 6,500 lbs: Stromberg Carlson Electric Landing Gear Set # LG-4 These landing gear sets come with everything you need for a total replacement, including the hand crank,...
  view full answer...
• Troubleshooting Landing Gear Issue On 2008 Weekend Warrior LED 3505
  It does sound like you have isolated the issue indirectly. If you can move everything manually without issue, then the screws in the legs are fine. The gearbox works fine under manual load, so gears are fine, and motor seems to work fine, so the issue most likely isn't your landing gear. The issue could be a weak battery. I recommend testing your battery to make sure it is charged. The 3:1 ratio is standard on landing gear but you can upgrade the motor speed for faster lift using...
  view full answer...
• Is the Stromberg Carlson # LG-179013 the Same as the Lippert Universal Fit Lead Jack # 179013
  I spoke with my contact at Stromberg Carlson and the Replacement Lead Jack with Drop Leg, # LG-179013, is the same part as the Lippert Universal Fit Lead Landing Gear, # 179013. The only difference between the two products is that they are sold through different companies so the part numbers are slightly altered. If you were interested in a replacement follow jack with drop leg you can took at part # LG-179014 or the entire assembly is available with part # LG-1.
  view full answer...
• Replacement Landing Gear for 2007 Cougar
  From what you have described it sounds as if the landing gear needs to be replaced. For your 2007 Keystone Cougar, I recommend the Stromberg Carlson kit, # LG-1 which matches exactly what you have and includes the motor too. Or, for a non-powered kit that will cost a bit less, # LG-183708 but this requires you to hand crank it.
  view full answer...
• Replacement Landing Gear for 2009 Keystone Cougar 5th Wheel
  The Stromberg Carlson Electric Landing Gear Set - Weld On - 34-7/8" Lift - 5,500 lbs # LG-1 is a complete landing gear and motor set that's a popular replacement we've seen used on many Keystone Cougar 5th wheel trailers, but you'll still want to confirm a few measurements. The two things you will want to measure will be the distance of the black outer tube of the jack and the distance between the frame clamps (this measurement can differ depending on where the weld stops are located)....
  view full answer...
  
• Determining The Correct Replacement Landing Gear For A 2006 Rage'n 5th Wheel Toy Hauler
  To determine the correct replacement landing gear for your 2006 Rage'n 5th Wheel Toy Hauler you'll want to measure the distance between the inside and outside of your current landing gear's weld stops. The brackets that hold the landing gears get welded to the frame of the trailer so if you can find a matching set you can easily swap them out without having to cut off and weld on new brackets. The Stromberg Carlson Electric Landing Gear Set # LG-1 have an inner edge to inner edge measurement...
  view full answer...
  
• Replacement Landing Gear for 2004 Forest River Cedar Creek
  Thank you for the pictures of your setup as based on that we know that the Lippert Manual Landing Gear Set part # LC333966 is a confirmed fit and would work great for a manual setup. Or if you wanted a setup that is powered like what you have now you could use the part # LG-1 which comes with everything new and is exact replacement for what you have now.
  view full answer...
  
• LG-1 Landing Gear Repair Kit Recommendation and Install Diagram
  The correct repair kit for the # LG-1 lead leg is part # LG-146059 and for the follower leg it's part # LG-146060. I attached a diagram that shows how these kits will install.
  view full answer...
  
• Picking Out Replacement Landing Gear for 2005 Fleetwood Toy Hauler with 29-1/2 inch Long Legs
  You have a few choices for replacement landing gear with legs that measure 29-1/2 inches, depending on what weight capacity you need and if you want manual or electric landing gear. Stromberg Carlson # LG-1: Electric Landing Gear with 5,500 lb Capacity Stromberg Carlson # LG-3: Electric Landing Gear with 6,500 lb Capacity Stromberg Carlson # LG-183708: Manual Landing Gear with 8,000 lb Capacity Just make sure you measure the distance between the mounting brackets from outside to outside...
  view full answer...
• Solution for Von Weise Fifth Wheel Landing Gear with Bad Motor
  We don't carry the Von Weise brand so we can't get the replacement motors like you mentioned. Best option we would be a new setup altogether with a motor like the # LG-1.
  view full answer...

Do you have a question about this Camper Jack?