To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
These replacement legs fit your Reese M5 fifth-wheel trailer hitch (RP30890 or RP30895) for the Chevy/GMC factory fifth-wheel towing prep package. Legs mount in the sockets in your truck bed for easy installation and removal.
Features:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we're gonna take a look at the replacement lights for the Reece M5 Fifth Wheel Trailer Hitch for the Chevrolet and GMC trucks. Now these are your custom fit part. They are designed to fit the 2016 and newer Chevrolet Silverado, GMC Sierra 2500 and 3500 trucks with either the six and half foot bed or the eight foot bed with the factory twin prep package.These replacement legs fit the Reece M5 Fifth Wheel Trailer Hitches, part number RP30890 and RP30895. Both of those we do sell separately on our website. These legs will basically attach to the center section of the M5 Hitch and allows you to install the whole hitch into the factory under bed rails.It's a very fast, easy installation. Let me just turn this leg around here so you can see.
Right here on each corner, there's a pin and clip and a handle. And what you wanna do is remove the pin and clip, rotate that handle out 90 degrees and rotate that tab. And if you do that on all four corners, that'll allow the hitch to be able to drop right into the four receiver pucks that are into your factory under bed rails.Once it drops in, just rotate that handle back 90 degrees to lock that tab into place and then for extra security on the handle just take the pin and clip. Let me open that pin and clip up, and drop it through there, and then clip it and locks it in place. And again you do that on all four corners.
It is a sturdy steel construction. Has a nice durable powder coat finish to it and it also comes with everything here on the table. Comes with the four bolts and washers that allow you to install this to the center section. And then four extra cotter pins if the tabs on the legs need adjusting. Basically these nuts here that hold the tabs down, sometimes you might need to adjust those either more to eliminate some rattle or losing them in to get them to fit.
But you always want to put a cotter pin through there, so they do give you some extra ones if you need to do any adjusting.But that should do it for the review on the replacement legs for the Reece M5 Fifth Wheel Trailer Hitch for the Chevrolet GMC trucks.
Do you have a question about this Accessories and Part?
Condition: Missing Parts
Notes: Item is missing the hardware. Otherwise new and unused.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.