Determining The Correct Replacement Landing Gear For A 2006 Rage'n 5th Wheel Toy Hauler

Updated 07/19/2022 | Published 07/16/2022

Question:

need replacement landing gear for 2006 ragen toy hauler 29305g is this what i need? Stromberg Carlson Electric Landing Gear Set - Weld On - 34-7/8 Lift - 5,500 lbs

asked by: Bob M

Expert Reply:

To determine the correct replacement landing gear for your 2006 Rage'n 5th Wheel Toy Hauler you'll want to measure the distance between the inside and outside of your current landing gear's weld stops. The brackets that hold the landing gears get welded to the frame of the trailer so if you can find a matching set you can easily swap them out without having to cut off and weld on new brackets.

The Stromberg Carlson Electric Landing Gear Set # LG-1 have an inner edge to inner edge measurement of 15-1/2" and outer edge to outer edge measurement of 17-1/2". I've attached a picture below that shows these measurements for this landing gear so that you can check what size you have.

expert reply by: Kevin C