bing tracking image
  1. Trailer Hitch Ball Mount
  2. CURT
  3. Fixed Ball Mount
  4. Fits 1-1/4 Inch Hitch
  5. Rise - 5 Inch
  6. No Ball
Curt Class I Drawbar - 5" Rise - 11-9/16" Long - 2,000 lbs
CURT

Curt Class I Drawbar - 5" Rise - 11-9/16" Long - 2,000 lbs

Part Number: C45025
In Stock
$36.31
Retail:$53.06
You Save: 32%
Trailer Hitch Ball Mount
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Videos

Need help with installation?
Locate installers near me
Corrosion-resistant ball mount is 11-9/16" long and fits 1-1/4" x 1-1/4" trailer hitch receivers. Ball mount can be used in the rise position only. Great Prices for the best trailer hitch ball mount from CURT. Curt Class I Drawbar - 5" Rise - 11-9/16" Long - 2,000 lbs part number C45025 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (2037)
  • Q & A (0)
  • Photos

CURT Trailer Hitch Ball Mount - C45025

  • Fixed Ball Mount
  • Fits 1-1/4 Inch Hitch
  • Rise - 5 Inch
  • No Ball
  • 2000 lbs GTW
  • Class I
  • CURT
  • Steel Shank - Gloss Black
  • 3/4 Inch Ball Hole Diameter

Corrosion-resistant ball mount is 11-9/16" long and fits 1-1/4" x 1-1/4" trailer hitch receivers. Ball mount can be used in the rise position only.


Features:

  • Sturdy, steel construction
  • Corrosion-resistant, black gloss powder coat finish
  • High-quality manufacturing process
    • CNC machined for strong, consistent cuts and welds
    • 7-Stage washing method delivers smooth, clean surface
  • Drawbar can be used in rise position only
  • Hitch pin and clip or hitch lock sold separately
  • Assembled in USA


Specs:

  • Application: 1-1/4" x 1-1/4" trailer hitch receivers
  • Gross towing weight: 2,000 lbs
  • Tongue weight: 200 lbs
  • Ball hole diameter: 3/4"
  • Length: 11-9/16" from center of hitch pin hole to center of ball hole
  • Rise: 5" from top of inside of hitch opening


How to Measure Drop on Standard Ball Mount

D-233 45025 Curt Ball Mount - 1-1/4" - Class I





Customer Satisfaction Score:


Customer Reviews

Curt Class I Drawbar - 5" Rise - 11-9/16" Long - 2,000 lbs - C45025

Average Customer Rating:  4.8 out of 5 stars   (2037 Customer Reviews)

Corrosion-resistant ball mount is 11-9/16" long and fits 1-1/4" x 1-1/4" trailer hitch receivers. Ball mount can be used in the rise position only.

by:

This drawbar was exactly what I needed with the 5" rise. I use it to tow my boat. My car is low to the ground so the rise was just what I needed. The drawbar is very durable as well. When I was out on my boat a hit and run was done on my trailer. The trailer was pushed into my car and both were moved about 3 feet forward. The drawbar didn't break in half. It was bent but it prevented any damage to the rear of my car because of the quality construction of the drawbar.



by:

The C45025 provides the perfect extension and rise for my 3010 4WD Mule, allowing it to tow my wood splitter. The cargo bed can be raised to it's service (latched) position without the tailgate contacting the 2" ball I installed. This drawbar is made in the US of A, folks, of solid, not tubular, steel, and the fit and finish are excellent! Order a hitch pin, if you need one, as this bar does not come with one.



by:

The Curt Class I Drawbar - 5" Rise - 11-9/16" Long is perfect for my 2013 Kia Soul. I needed the rise to level my boat trailer and the length got it back away from back of kia soul. Very nice drawbar.Kia soul tows my 14 ft boat very well with this setup. Etrailer is great to help you get the right parts,and very quick getting them to you



by:

This product is as advertised. Unfortunately I had to order it as a replacement for the draw bar I originally ordered because the original didn't have enough length to sufficiently clear the bumper. This draw bar clears the bumper with space to spare, and was the only option we could find with both the length and rise to fit my Mazda. Overall I am satisfied to have found a draw bar that would work for me, even if it took two tries.



by:

Solid and easy mount of Myka canoe load er.



by:

I bought this hitch with the reciever for pulling my jon boat with my car . The 5 inch rise worked perfect for my . It seems strong and sturdy for what I am using it for . Perfect for pulling smaller trailers with a car.

Kenneth P. profile picture

Kenneth P.

5/20/2021

After using the 5 inch rise for a year now, it works perfect for pulling my boat with my Prius. Definitely recommend this hitch.



by:

Excellent Product just as described. It fits perfectly on my Toyota Corolla 2010. Perfect to Tow my jet ski.



by:

I bought all the parts through eTrailer, and the people at there are great. But, I have been unlucky. After 10 months, my Draw bar cannot be separated from the receiver. I don't know why. While I have used it to tow a PWC a couple of dozen times, I haven't dunked the draw bar underwater but maybe a couple of times. I always wash everything and sprayed under my car. I brought it to a local shop. They hooked up a fork lift to apply a pulling force to the bar and banged it with a sledge hammer, but still could NOT separate it. I and it are stuck. My shin bones have paid the price a few times. Be careful.



by:

Made well , But very loose fit , there's a ton of play when inserted into the hitch , I could understand if it was two different makers, but there both Curtis products !!

Victoria B. profile picture
Etrailer Expert

Victoria B.

4/29/2020

There are tolerances for both the hitch receiver and the ball mount, so there often is some play between the hitch receiver and accessories. An anti-rattle device like the Roadmaster Quiet Hitch # RM-061-125 is a great option to keep your ball mount tight inside your hitch receiver.



by:

This unit was used on a trike to clear the back end and correctly position at the ball height for a tent trailer. It was excellent! Great quality and delivered as advertised.

Franklin H. profile picture

Franklin H.

5/5/2019

This hitch has performed flawlessly.



by:

Keeps the trailer nice and level if you do some simple measuring. Took a bright yellow paint stick and wrote on it "CHAINS" so my son and I don't forget to hook up the safety chains.



by:

Looks great and fits perfectly on my 2015 Sonata Sport



by:

Love etrailer.com. Ordered two hitches one a class 1, for my bike rack the other a class 2 to tow a small utility trailer. Etrailer contacted me just to make sure I didn't make a mistake in ordering. Super!, Customer Service. The items came fast and was just as discribed. I've owned 2 jetski's, 2 pickups, 2 cars and thanks to Etrailer they have outfitted me with everything I needed to tow and haul with. I've told friends and they found items here that they couldn't find locally.



by:

Fitment is good. Not great. Since the Curt receiver is for a Curt hitch I would hope for better tolerances. Makes noise when trailering due to movement in receiver even with good pin. Strong and easy to mount ball.



by:

The product was exactly what I needed; but more importantly, the help that I received from Madison during the ordering process was fantastic.
She helped fill in the gaps of missing information that I had been provided by the trailer rental place who installed the hitch.
Thank you again for your great customer service!



by:

This is the perfect fit for my 98 Honda Accord.
Top quality, good looking.



by:

Works great for our track car. We tow a small trailer with wheels and tools.



by:

Would have been nice to know it doesn't come with a pin. The part is useless with out it.

Brooke M. profile picture
Etrailer Expert

Brooke M.

6/1/2023

We do try to be as upfront and clear about what all comes with parts, and I am sorry you are disappointed. Usually, a good rule of thumb for our site is that if it isnt pictured in our product pictures, then it isnt inlcuded. If you are still needing a pin, part # F-4 would work.



by:

I will always go to etrailer first. Best products and even better service!!! Thanks



by:

Product is as described. Have yet to use but expect it to function as expected. Wish there was a larger rise available. 5 inches is just barely what I need. Also wish there was an adjustable 1.25 product liker there is with the 2.0 inch products.
It would have been nice if the product was packaged better. There was no padding in the box and the product broke through the box most likely because of product weight and mishandling by the common carrier. Luckily it did not fall out completely.



by:

Item was scuffed like it was used when I pulled it out of the box. Other than that it's fine though.

Jenny N. profile picture
Etrailer Expert

Jenny N.

3/21/2023

I can assure you that the items that we sell are not used however it is possible that it was banged up along the way. I will have our Customer service team reach out to you.



by:

Perfect for my KIA Soul with its low trailer hitch



by:

Hitch arrived fast and secure in nice packaging. The bolt holes lined up perfectly and was in installed in a matter of minutes using one ratcheting wrench. I can now fully utilize my Subaru WRX to tow and haul my toys. I stood on the hitch and bounced to check for flex, there was virtually none with my weight of 240lbs. Great product and company.



by:

Exactly what I ordered. Video with dimensions was very helpful. Purchased for a 2007 Chevy HHR 2LT with a curt class I hitch. There is about 2-3in clearance between the rear bumper and the back of the ball mount.



by:

The Curt class 1 drawbar is great well made and arrived very quick and well packed. I would recommend e-trailer to my friends for any trailer items they need. Customer service was great very helpful and polite.


25
2030
Show More Reviews

See what our Experts say about this CURT Trailer Hitch Ball Mount

  • Utility Trailer, Trailer Hitch Receiver, and Wiring Harness For Towing With 2014 Buick Verano 2.4L
    First you will only be able to tow a trailer if your 2014 Buick Verano has the 2.4L engine and a single exit exhaust. The 2.0L turbo is not rated to tow from Buick and will not fit with Curt Trailer Hitch Receiver # C11282. This receiver paired with a 2.4L single side exhaust will allow you to tow up to 1,000lbs according to your owners manual. The Curt T-Connector Vehicle Wiring Harness # C56288 will give you a 4-way flat trailer connector. This will connect to a Detail K2 Mighty Multi...
    view full answer...
  • Parts Needed to Tow a Trailer with a 2014 Toyota Prius 4
    As far as whether or not you can tow a trailer with your 2014 Toyota Prius you will need to check the owners manual or with a Toyota dealer for the final say on that. Our understanding is that Toyota says that you cannot tow at all with your vehicle. With that said, we have seen instances where people will do this anyways and parts are available to do so. For a hitch you can use the Curt # C11276, which is a confirmed fit on the 2014 Toyota Prius. For the wiring I recommend using the...
    view full answer...
  • Will the Curt Class I Drawbar - 5" Rise Clear My Bumper
    In order to confirm fit of the Curt Class I Drawbar part # C45025 on a vehicle with a recessed trailer hitch you just need to measure from the center of the hitch pin hole to the outer edge of the bumper and make sure it's no more than 8". This one has a 5" rise so the distance from the ground to the top inside edge of the trailer hitch will need to be less than 5" from the distance from the ground to the bottom of the coupler on the trailer. The 2" Hitch Ball part # 19258 is compatible...
    view full answer...
    Image 1 for
  • Determining Which Drop/Rise Ball Mount will be Needed to Transport my Coleman Popup Camper
    I can help you figure out what which ball mount you will need for your Mazda and Coleman popup camper. There's some specific measurements to take to determine the rise/drop of ball mount you need. Measure from the inside top of the receiver tube to the ground. Then, with the trailer jacked so that it's level, measure the distance from the underside of the coupler to the ground. The difference between the two measurements is the rise/drop needed. If the coupler height is taller than that...
    view full answer...
  • Recommended Drawbar To Tow SeaDoo With 2013 Chevrolet Camaro
    It sounds like you have a pretty good game plan so far! The Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # 24850 you were looking at is confirmed to fit your 2013 Chevrolet Camaro 2LT and would be prefect for towing your small SeaDoo Trailer. Now the highest rise available in a Class I Drawbar that is long enough to clear the bumper on your Camaro is the Curt Class I Drawbar - 5" Rise - 11-9/16" Long - 2,000 lbs # C45025 that has 5" rise. When we installed...
    view full answer...
  • How to Determine the Rise/Drop of Class I Ball Mounts
    There's some specific measurements to take to determine the rise/drop of ball mount you need. Measure from the inside top of the receiver tube to the ground. Then, with the trailer jacked so that it's level, measure the distance from the underside of the coupler to the ground. The difference between the two measurements is the rise/drop needed. If the coupler height is taller than that of the receiver, you'll need a ball mount with a rise. If the coupler height is smaller than that of the...
    view full answer...
    Image 1 for
  • Available Drawbars for 1-1/4 Inch Hitches with at Least a 5-inch Rise in the Shank
    The Curt bar # C45028 (5-3/8 inch rise or 6-inch drop) you referenced is one of 3 Curt drawbars we currently offer that will have a 5 inch or more rise in the shank. The reason other shanks may have a different rise is because it may have a different Class rating. I also pulled this drawbar from our warehouse and made a short video and diagram for you. Please note you can only use Class-I rated crossbars because your 1998 Volkswagen Cabrio only works with Class-I hitches. The two other...
    view full answer...
    Image 1 for
  • Recommended Ball Mount To Get 6" Of Rise For a 2015 Chrysler 200 Class I, 1-1/4" Receiver
    Currently our Curt Drawbar # C45028 has the most rise available for a 1-1/4" Class I receiver like that you would have on your 2015 Chrysler 200. The rise is 5-3/8" from the receiver. To get slightly closer to your 6" rise you can use a Curt Class I Drawbar # C45025 with a Curt RockerBall Shock Absorbing 2" Hitch Ball # C94CR. The ball mount has a rise of 5" and the RockerBall sits 1-1/2" higher than a traditional 2" ball. As long as your trailer accepts a 2" ball this would give you...
    view full answer...
  • Ball Mount Recommendation for Class I Draw-Tite Trailer Hitch on a 2005 Honda Accord Coupe
    Take a look at the picture I have included. If the receiver on the Draw-Tite trailer hitch # 24787 on your 2005 Honda Accord has that tab behind the hitch pin hole then the Class II ball mount # C45014 will not fit. But you can use # C45025 which has the same rise and is Class I compatible. Clearing the rear bumper should not be an issue. Ball mount # C45025 measures 11-1/4 inches long from the center of the hitch pin hole to the center of the ball hole. For a compatible 1-7/8 inch ball...
    view full answer...
    Image 1 for
  • Selecting Ball Mount for Yakima Trailer with 22" Coupler Height and Ford Focus with 10" Hitch Height
    If you measured a distance of 10 inches from the ground to the top of the inside of the Draw-Tite # 24872 hitch receiver on your 2015 Ford Focus, the Curt Drawbar # C45028 is going to put the ball platform at 15-3/8" above the ground. With the hitch ball actually in place you are looking at a ball height of around 17-3/8", which is still quite below the ideal 22" ball height for the Yakima trailers such as the Rack and Roll # Y08107. With this setup the Yakima trailer is going to be riding...
    view full answer...
  • Parts Needed For Towing a Endeavor Trailer With a 2019 VW Jetta
    Using the Draw-Tite Sportframe Trailer Hitch Receiver # 24978 on your 2019 Volkswagen Jetta the receiver is capable of supporting a trailer up to 2,000lbs with a tongue weight up to 200lbs. You will want to verify towing capability with your owners manual or dealer service department to determine exact capacities for your Jetta. More than likely with Endeavor rating the trailer for a class II receiver is for one of 2 reasons. As they list the dry weight at 530lbs with a load capacity...
    view full answer...
  • What is the Correct Ball Mount for Curt Trailer Hitch C11227 on a 1994 Toyota Celica ST
    This is actually a lot easier to determine than you might think. With any Class I or II trailer hitch you will need to use the ball mount recommended in the hitch instructions. The use of any other ball mount can result in voiding the hitch warranty. The reason is that on Class I and II hitches the ball mount recommended has been tested for and approved for use as the best option for those hitch and vehicle combinations. For trailer hitch # C11227 the recommended ball mount is # C45503....
    view full answer...
  • Correct Draw Bar for Curt Class I Receiver C45025 on 2012 VW Golf TDI
    The draw bar included with the hitch is part # C45016, which has a 2-5/8 inch rise, or 3-1/4 inch drop. Ideally, you want to tow the trailer so that it is as level as possible, but being within an inch and a half either way is close enough for government work. Keep in mind that hitch is designed to work best with a draw bar with the same drop as the C45016, and using a draw bar with a different rise or drop is not recommended. I will link you to our FAQ article that shows how to correctly...
    view full answer...
  • Availability of a Long 1-1/4 inch Ball Mount
    The longest Class I ball mount we offer is the Curt Ball Mount part # C45025 which is 11-6/16 inches long. If you could use a Class II ball mount (also 1-1/4 inch) you could use the Curt Class II Draw Bar part # C45000 that measures 13-1/2 inches from the pin hole to the ball hole.
    view full answer...
  • Will a Class II Drawbar Fit Into the Class I Curt Hitch # C11080
    Curt states that Drawbar, # C45522, is the ball mount designed for use with Curt Trailer Hitch Receiver, # C11080. Although the Curt Drawbar, # C45025, will most likely fit in your hitch, it was not designed for use with this particular hitch. If failure occurs when using this drawbar, Curt may void any warranty on the hitch. As for using a Class II drawbar in a Class I trailer hitch, most Class I trailer hitches have a stop built into them so a Class II drawbar can not be used. This...
    view full answer...
  • Ball Mount Recommendation for a 2016 Toyota Corolla with Hidden Hitch
    When picking out a ball mount for a Class I hitch like the part # 60345 you have to go with the ball mount that is recommended for the hitch. If the one that came with this hitch doesn't have the right rise there's nothing I can safely recommend since Draw Tite states that the use of any other ball mount will void the warranty. You will have to use the part # 3593 that came with the hitch in the rise position. This will give you 2-1/8 inches of rise. For a 2 inch ball you would need the...
    view full answer...
  • Recommended Ball Mount For 2012 Ford Mustang V6 Towing Trailer W/ 17" Coupler Height
    Where we installed the Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # C11210 on a similar 2014 Ford Mustang V6 we found that from the ground to the top inside edge of the receiver measured 10-1/2". As long as the tires on your 19" wheels are the same overall height as the factory tires on your Mustang, this measurement will be the same for your vehicle. I recommend the Curt Class I Drawbar - 5" Rise - 11-9/16" Long - 2,000 lbs # C45025 as this is the most rise available...
    view full answer...
  • Parts Needed to Tow a Small Pop Up Trailer with a 2021 Ford Mustang Convertible
    Hey Keith, thanks for reaching out! According to the online owner's manual for your 2021 Ford Mustang you can tow up to a 1,000 lb trailer, which I recommend verifying in your copy of the manual. With that being the case, here are the parts I recommend for your setup: - Draw-Tite Sportframe Trailer Hitch Receiver # 24928 - T-One Vehicle Wiring Harness # 118487 - Mounting Brackets # 18136 and # 18144 - Ball Mount Parts # C45025 and # 19258 - Yakima EasyRider Double Decker Trailer...
    view full answer...
  • Can Curt Class II Ball Mount # C45014 Be Used With Class I Hitch on 2002 Volkswagen Passat
    All hitches offered for your 2002 Volkswagen Passat are of the Class I type and can only be used with compatible Class I accessories. Although the ball mount # C45014 from Curt is also a 1-1/4-inch size it is a Class II ball mount and will not work in your hitch. We do offer two Class I ball mounts with the same 5-inch rise as the part you referenced. These will work in your hitch. You can see both on the link provided; two lengths are available, including the 9-9/16-inch long # C45024...
    view full answer...
  • 2 inch Hitch Ball Recommendation to Use with Ball Mounts 3593 and C45025
    For a 2 inch ball to use with the draw bar part # 3593 you would want the part # 19258. For the part # C45025 you would then want the part # C40018. Both balls have 3/4 inch diameter shanks.
    view full answer...
  • What is the Longest 1-1/4 Hitch Ball Mount You Carry?
    Since you mentioned the Draw-Tite Drawbar - 11-3/4" Long # 36063 and it is only compatible with Class II 1-1/4", it sounds like you have a Class II 1-1/4" hitch. If this is the case, we actually have a longer ball mount available. That is the Curt Class II Drawbar # C45000. This mount measures 13-1/2" from center of hitch pin hole to center of ball hole. If you by chance need a Class I 1-1/4" compatible mount, the longest one we carry is the Curt Class I Drawbar # C45025. This mount measures...
    view full answer...
  • How To Transport 500lb Medical Scooter With 2010 Honda Accord
    I have another option for you, but there is not a trailer hitch receiver available for your 2010 Honda Accord that can carry a 500lb medical scooter on a hitch mounted carrier. Instead I recommend going with the Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # C11496 you were looking at and getting a small trailer similar to the Detail K2 Mighty Multi Utility Trailer - 6' Long - 1,295 lbs # K2MMT4X6. Since this hitch has a 2000lb trailer weight rating it will be fine for...
    view full answer...
  • What Trailer Hitch Is Recommended For My 2013 Hyundai Veloster Turbo
    When it comes to installing a trailer hitch on your 2013 Hyundai Veloster Turbo The Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4 inch # C11254 is confirmed to fit your vehicle. The hitch can tow up to 1,000 pounds and has a tongue weight up to 100 pounds, so you will not be able to haul your 200+ pound dirt bike, but you could tow the dirt bike on a trailer using The Curt Class I Drawbar - 5 inch Rise - 11-9/16 inch Long - 2,000 pounds # C45025 and attaching The 2 inch Hitch...
    view full answer...
  • Recommended Trailer Hitch And Wiring For 2004 Chrysler PT Cruiser
    The trailer wiring is not included with a trailer hitch for your 2004 PT Cruiser. We do offer them separately. There is no drilling required for the installation of the Curt Trailer Hitch, part # C11132. This is a Class l hitch and it has a 1-1/4 inch receiver opening. I have attached a link to an installation video for this hitch on a PT Cruiser you can check out. As the video shows, the trailer hitch uses the tow hook mounting locations on the vehicle frame after they have been removed. The...
    view full answer...


< Previous
12



Do you have a question about this Trailer Hitch Ball Mount?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Lindsey S
Written by:
Lindsey S
Employee Brandon M
Installed by:
Brandon M
Employee Cole B
Installed by:
Cole B
Employee Wilson B
Updated by:
Wilson B
Employee Kristina F
Updated by:
Kristina F
Employee Mike S
Updated by:
Mike S
Employee Isabelle B
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.