bing tracking image
  1. Trailer Hitch Ball Mount
  2. CURT
  3. Fixed Ball Mount
  4. Fits 2 Inch Hitch
  5. Drop - 2 Inch
  6. Rise - 1 Inch
Curt Ball Mount for 2" Hitches - 1" Rise, 2-1/4" Drop - 7-5/8" Long - 7,500 lbs
CURT

Curt Ball Mount for 2" Hitches - 1" Rise, 2-1/4" Drop - 7-5/8" Long - 7,500 lbs

Part Number: C45030
In Stock
$23.46
Retail:$38.50
You Save: 39%
Trailer Hitch Ball Mount
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Corrosion-resistant, black powder coated ball mount measures 7-5/8" from center of hitch pin hole to center of ball hole. Use it in either the drop or the rise position to fit your application. Hitch pin and clip sold separately. Great Prices for the best trailer hitch ball mount from CURT. Curt Ball Mount for 2" Hitches - 1" Rise, 2-1/4" Drop - 7-5/8" Long - 7,500 lbs part number C45030 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (3925)
  • Q & A (0)
  • Photos

CURT Trailer Hitch Ball Mount - C45030

  • Fixed Ball Mount
  • Fits 2 Inch Hitch
  • Drop - 2 Inch
  • Rise - 1 Inch
  • No Ball
  • 7500 lbs GTW
  • Class III
  • CURT
  • Steel Shank - Gloss Black
  • 1 Inch Ball Hole Diameter

Corrosion-resistant, black powder coated ball mount measures 7-5/8" from center of hitch pin hole to center of ball hole. Use it in either the drop or the rise position to fit your application. Hitch pin and clip sold separately.


Features:

  • Ball mount lets you hook up your trailer to your tow vehicle
    • Shank slides into your vehicle's hitch receiver
    • Ball platform provides mounting point for hitch ball (sold separately)
  • Both drop and rise positions available to ensure level towing
  • Sturdy steel construction
  • Corrosion-resistant, high-gloss black powder coat finish
  • Hitch pin and clip or hitch lock sold separately
  • Assembled in the USA


Specs:

  • Application: 2" x 2" trailer hitch receivers
  • Gross towing weight: 7,500 lbs
  • Tongue weight: 750 lbs
  • Length: 7-5/8" from center of hitch pin hole to center of ball hole
  • Rise: 1" from top of inside of hitch opening
  • Drop: 2-1/4" from top of inside of hitch opening
  • Ball hole diameter: 1"
  • Pin hole diameter: 5/8"
  • Limited lifetime warranty


How to Measure Drop on Standard Ball Mount

45030 Curt Class 3 Ball Mount - Standard Duty 2" Square Ball Mount - 1" Rise, 2-1/4" Drop





Customer Satisfaction Score:


Customer Reviews

Curt Ball Mount for 2" Hitches - 1" Rise, 2-1/4" Drop - 7-5/8" Long - 7,500 lbs - C45030

Average Customer Rating:  4.9 out of 5 stars   (3925 Customer Reviews)

Corrosion-resistant, black powder coated ball mount measures 7-5/8" from center of hitch pin hole to center of ball hole. Use it in either the drop or the rise position to fit your application. Hitch pin and clip sold separately.

by:

This is a great all-purpose hitch. I've used it to mount a heavy-duty bike rack and a steel T-rack to carry a canoe as well as lumber. Most recently I hauled 5 x 8 cargo trailers full of plants, then furniture for a 600-mile move. It was simple to use, problem free, very strong and sturdy. Now that I live on some acreage, I see a trailer in my future, so this will get a lot more use. I drive a 2013 Tacoma, so this is a good size hitch at a good price with sufficient capacity for my needs. I do use a key lock for the hitch as well.

Debi

10/4/2024

This hitch continued to work problem free. I had no issues with rust, anything coming loose or alternately, tightening up. It still a great all purpose hitch, and remains in great condition, so when I sold my Tacoma, I kept the hitch for my new truck.



by:

Just your basic ball mount, the product is just like most 2” Hitch ball mounts, the service wasn’t very good though.
Ordered on June 15th (product was in stock) took them 6 days to send it out, took another 6 days in shipping and got all the way to my post office two days before leaving on vacation (I needed it for the vacation) and the post office said “box was empty and they notified seller” etrailer sent a new one (got here a week after my vacation) in a damaged box (packaging is horrible, little bit of paper in a box with a 5 lbs ball mount) almost lost this one too.
I don’t believe I’ll be using etrailer in the future (had issues before)



by:

Does the job, however there's a lot of play when hitch mount is inserted into the hitch and when towing with an empty trailer. Very loud. Have to buy a silencer that goes around and secures the product.

David P.

9/21/2016

So far so good - thx for checking



by:

Great service! Very happy with how fast the product got to me. Will order from E-trailer again if I need trailer parts in the future.

Thank You!



by:

Looks & works great. Easy to install. Make sure you order or have a locking pin and ball to go with it.



by:

I know absolutely nothing about hitches! I checked prices and products in my area and was dissatisfied with high prises and confusion over which product would be best for my vehicle. I did an extensive search on the internet and found etrailer.com. I called and talked to Jonathan. He walked me thru the entire order process and explained details about the products. I placed my order and received it in time frame I asked for. My local Toyota dealer installed the hitch without any problems! I am totally satisfied with the pricing, product and customer service. I highly recommend etrailer.com!!!



by:

It's a ball mount. Feels substantial and well made. Paint looks good, nice looking welding. Can't say anything bad. I understand that the hitch balls come in different sizes and types, but it would have been nice to get a simple hitch pin and clip when buying the hitch and ball mount together, as I was expecting that to be included with one or the other.

John

6/4/2020

Year later, still works fine. Still think it should have included a hitch pin and clip.



by:

The product was going to come in late but etrailer offered a more expensive hitch substitute for the product I ordered. I was completely satisfied with the service, communication and product. This is the second time I purchased from etrailer.

Roy

11/10/2022

fine



by:

Ordered the whole trailer hitch package but did not include the pin for the ball mount. CHEAP and will never order from you again



by:

Excellent workmanship, easy to use, str ong



by:

Not much can go wrong with this can it? It's fine.



by:

Perfect fit for my Curt Receiver Hitch for my Venza !



by:

This hitch is perfect for my needs. Great, quality products, from a knowledgeable source, offering competitive prices. Also, the brief video assist eased my installation efforts.



by:

I seldom take the time to write a review but I felt compelled to share my excellent overall experience with etrailer.com. I ordered the C13200 trailer hitch receiver, 2" ball, 2" ball mount receiver, pin/clip, and C56217 wiring harness for my 2017 Toyota Highlander XLE. All arrived in no time and in excellent condition. The installation videos and PDF documents are outstanding. I installed the hitch receiver in roughly 45 minutes - includes time to convince brother in-law to come over to help hoist it into place. Wiring harness installation was a breeze, roughly 20 minutes (again, great instructional videos). I could not be happier with the finished product. Thanks etrailer.com for making this a trouble free installation. If you are considering adding a hitch, etc. go no further, you are at the right place...order away. Its very easy to install and you will save a trailer load of cash!!!



by:

Great product! Easy install. Completed project myself in 1.5 hours...would recommend for any skill level...just gotta be willing to crawl around on your back



by:

Instalation was pretty quick and easy, the completed installation worked great on my new trailer.



by:

Curt Ball Mount for 2'' Hitches-C45030
Curt
T Connector Vehicle Wiring Harness w/ 4 pole flat trailer connector-C56225
Curt Trailer Hitch Receiver Class 3 2''-13241

Website easy to use. PayPal available (the main factor).
Fast shipping. Well packaged. All 3 items installed within minutes.
Amazing experience with etrailer!!
Will definitely return to do business.
Thanks!!

60 F.

10/27/2017

We are more than pleased with your products and the transaction. Thanks again!



by:

Ordered a complete hitch package for my GMC Terrain. Every piece was included and all of it was top notch quality. The fit was perfect and installation was a breeze. The wiring harness matched up perfectly with the OEM plugs, no splicing or crimping required. I highly recommend this company and its products.

Glenn M.

8/23/2016

The hitch has performed perfectly. Im a very satisfied customer.



by:

Good product. Just as one should expect.



by:

I like it in the up position to give more ground clearance.



by:

The video and the written instructions for installing the hitch were very helpful for a novice like me. In the process I saw that there was a good reason for every tool listed for installing it. The hitch fits perfectly and looks very sturdy. Now we can't wait to be able to take our bicycles with us when we go to the mountains from Denver, letting us enjoy all the biking trails. Also the hitch arrived only 3 days after ordering it - great!

Dean D.

6/26/2016

Great -no problems and very convenient.



by:

I ordered a Curt ball mount for the second hitch I purchased from etrailer this year. It arrived a day earlier than I thought it would! Thank you Melinda for taking care of my order. etrailer is 3 for 3 with me, 100%. I highly recommend them and will be using them in the future.

Michael A.

12/3/2016

No problems or issues with any of my etrailer.com purchases



by:

I'm assuming I have to buy the pin separately, but this wasn't pointed out to me, so when I got ready to use this I had to stop and get a pin.



by:

Everything was as expected. Installation was a piece of cake after watching the very much appreciated video on etrailer.com. The hitch is very sturdy and fit like a glove. I couldn't be happier with this purchase.

Paul C.

6/28/2018

I have had no issues at all and am still very impressed with the quality and performance of the products. Thanks for the follow up!



by:

Wiring harness, ball mount and hitch receiver went together very well. I was able to put it out in very short order.

Anthony S.

5/1/2018

Great! Got hit in the back and the hitch kept the vehicle from getting smashed worse. The only problem with it is the fact that it makes black and blue marks on my shins when I forget its there!

Etrailer Expert

Rachael H.

5/1/2018

Thanks for the follow up Anthony. After a rear collision we recommend inspecting the hitch, ball mount, and all towing components before using again due to any damage from the impact. For the black and blue marks, we do have something that might help you with that, I have inlcuded a link to the shin guards that we currently offer for your reference.

25
3898
Show More Reviews

See what our Experts say about this CURT Trailer Hitch Ball Mount

  • Complete Towing Setup For A 2022 Ford Bronco
    Yes, for your 2022 Ford Bronco, you can use the Curt Trailer Hitch Receiver # C76WR. This hitch will bolt to your vehicles frame, has a maximum towing capacity of 3500-lbs, and a maximum tongue weight of 350-lbs. You'll want to check your vehicle owners manual for your vehicles maximum towing capacity, and compare that to the hitches maximum towing capacity, and use the lowest rating between the two. You may also want wiring so your trailer, or hitch mounted accessory has lights while...
    view full answer...
  • Is The Reese Sway-Control Bracket Compatible With The Curt Ball Mount # C45030
    Hi David, The Curt Ball Mount for 2" Hitches # C45030 is approximately 2-1/2" wide. The Reese Sway-Control Bracket # RP26003 can fit ball mounts that are smaller than 2-5/8" wide so these two components would be compatible with each other.
    view full answer...
  • Trailer Hitch Suggestion for 2022 Chevy Colorado LT
    We do indeed offer hitch options for the 2022 Chevy Colorado. Of the available options, I'd recommend the US made etrailer brand Class III hitch, part # e98909. The hitch has a 8000 lb towing/800 lb tongue weight capacity, which actually exceeds the towing capacity of the truck itself, so there's no doubt that the hitch is tough. For a trailer wiring harness and trailer connector that provides both a 7-way and a 4 pole trailer connector, use part # HM40975-11998. For a ball mount, use...
    view full answer...
  • Recommended 2 Inch Ball Mount With 1 Inch Rise
    For a 2 inch ball mount that offers a 1 inch rise/2 inch drop and a 12K capacity, I'd recommend the Draw-Tite # 4284. For a 2-5/16 inch ball, use # 19286 which also has a 12K capacity. If you don't need that much capacity, go for the Curt # C45030 and for a 2-5/16 inch ball, use # 63847. This combination would have a 7500 lb maximum capacity. For either setup, you'd also need a # PC3 hitch in.
    view full answer...
  • Trailer Hitch Recommendation for a 2015 Audi Q5
    The Draw-Tite Class III Max Frame # 75940 is a great hitch for your 2015 Audi Q5. My contact in the engineering department at Cequent Performance Product tells me that they don't have any reports of the fascia needing to be trimmed, whether or not the vehicle is equipped with the rear-view camera. I attached the installation instructions for you to check out as well. To complete your towing set-up, you'll want to install the # C59236 trailer wiring harness (see linked install video)....
    view full answer...
  • Are Curt and Draw-Tite Class III Trailer Hitches for 2020 Honda Passport Hidden Behind Bumper
    Both the Curt # C13421 and the Draw-Tite # 76290 Class III hitches for the 2020 Honda Passport will install so that the hitch crossbar is concealed behind the vehicle bumper, but the receiver tube and the safety chain hooks will be visible. When the hitch is installed, the receiver tube will sit against the underside of the bumper fascia as shown in the provided photo. The main differences between the two are the weight capacity, as well as the fact that the Draw-Tite # 76290 provides...
    view full answer...
    Image 1 for
  • Recommended Towing Setup for a 2022 Chrysler Pacifica Hyrbid
    Yes, the Curt Trailer Hitch Receiver # C29UR does fit your 2022 Chrysler Pacifica Hybrid. This trailer hitch has a maximum towing capacity of 4,000-lbs, a maximum tongue weight of 400-lbs, and is assembled in the USA. To complete your towing setup you're going to also need a wiring kit, T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # TK96FR as well as a ball mount like the Curt Ball Mount for 2" Hitches # C45030.
    view full answer...
  • Does Tongue Weight Sag Get Factored In When Picking Out Rise/Drop Ball Mount
    This is a really great question! So ideally you have the trailer sitting as level as possible when you are towing. So that means that if your vehicle suspension is going to sag with the tongue weight of your trailer on the ball mount you'd want to compensate for that with the amount of rise/drop ball mount you select. How this normally works out is that you determine the drop needed (in your case 8 inches) and then go with a ball mount slightly higher like the Curt part # C45100 which...
    view full answer...
  • Trailer Hitch and Wiring for 2019 Jeep Grand Cherokee Towing Boat Trailer
    For your 2019 Jeep Grand Cherokee the Draw Tite hitch part # 75699 is a really great option that I would recommend highly as it has a mostly hidden design, installs easily, and has great towing capacities. I attached an install video for this for you to check out as well. Then for trailer wiring you'd want the Tekonsha kit part # 118727 which installs easily and has a very reliable converter box. Then for a ball mount the part # C45030 would work great with the hitch ball # C40002 and...
    view full answer...
  • Recommended Class III Trailer Hitch for 2006 Subaru Outback Wagon with Best Fit to Rear Bumper
    Draw-Tite offers a Class III Trailer Hitch Receiver for your 2006 Subaru Outback Wagon, part # 75560e. If you look at the provided photo, you can see how the hitch appears below the bumper fascia. If you'll be using the hitch for towing, you'll also need the following to complete your towing system. Trailer Wiring Harness with 4-pole trailer connector, part # 118461 Ball Mount, part # C45030 Trailer Ball, # 63845 for a 2 inch, or 19260 for a 1-7/8 inch Locking Hitch Pin, part # e98882 To...
    view full answer...
    Image 1 for
  • Trailer Hitch and Powered Wiring Harness Recommendations for 2007 Mercedes-Benz ML350
    We offer several 2-inch Class III hitches for your 2007 Mercedes-Benz ML350 that can be seen on the link provided. All have the same capacities and will install pretty much identically. Each includes the required mounting hardware and each one will require a little drilling. I recommend the Curt # 13342 since it is the lowest cost option. Instructions are linked along with a helpful article on hitch installations. The ball mount, hitch pin and clip are sold separately. I recommend ball...
    view full answer...
  • Weight of Draw-Tite Class III 75673 Trailer Hitch for 2013 Subaru Outback Wagon
    Minus packaging, the Draw-Tite # 75673 Class III trailer hitch weighs about 32 lbs, and is a confirmed fit for your 2013 Subaru Outback Wagon. You might consider the less expensive Curt # C13410 Class IIl as well. The Curt hitch features a concealed design that hides the hitch crossbar behind the bumper for a cleaner appearance. I've linked to install video for both hitches, so you can compare what both hitches look like once they're installed. The Curt hitch weighs about 5 lbs less than...
    view full answer...
  • What Size Ball Shank Does Curt Ball Mount C45030 Require
    Yes, the ball mount part # C45030 requires a hitch ball that has a 1 inch diameter shank like the # 63845 for a 2 inch ball or the # 63847 for a 2-5/16 inch ball.
    view full answer...
  • What Does Curt Trailer Hitch C13236 Look Like Installed on a 2017 Dodge Challenger
    I have included a picture showing what Curt trailer hitch # C13236 looks like installed on a 2017 Dodge Charger. I think that the hitch and its positioning match the lines of the vehicle quite well which is not normally the case with trailer hitches. But this one blends nicely. If you plan on doing some towing I recommend Curt Ball Mount for 2" Hitches - 1" Rise, 2-1/4" Drop - 7-5/8" Long - 7,500 lbs Item # C45030. It will accept a hitch ball with a 1 inch diameter shank such as # 63845...
    view full answer...
    Image 1 for
  • Can the Hidden Hitch Ball Mount Be Used Upside Down
    If you're meaning can you use the Hidden Hitch Ball Mount # 80232 in either orientation then the answer is yes you can. You can use this ball mount right side up and get 3/4" of rise, or you can flip it upside down and get 2" of drop.
    view full answer...
  • Trailer Hitch and Wiring Recommendation for 2015 Mazda CX-9
    We can offer you a choice of either 1-1/4-inch Class II or 2-inch Class III hitches for your 2015 Mazda CX-9. When there is a choice I always recommend the higher-capacity 2-inch Class III type since the cost is not too different. Of the options available I suggest the Curt # 13575. This hitch installs without drilling and includes all required mounting hardware. Written instructions, a helpful article and an install video are all linked for you. The only special tool needed is a torque...
    view full answer...
  • Recommended Fit and Compatibility of Components for Hauling a Trailer with a 2005 Honda CR-V
    I checked out all the parts you listed ( # 13535, # 118336, # C45030, # 63845, and # C21500) and good news they will all work together. I do have a few suggestions for you though. I would instead suggest the Draw-Tite hitch # 75690 over the Curt hitch because if you decide to transport anything like a bike rack or cargo carrier in the future you will need to use a stabilization strap # 18050 per Curt's warranty and with the Draw-Tite hitch you won't. Next suggestion is we offer a Curt...
    view full answer...
  • Trailer Hitch, Wiring And Components For A 2022 Hyundai Palisade
    The hitches for your 2022 Hyundai Palisade, like the etrailer Trailer Hitch Receiver # e95ZR all have the bend in them to be able to get around the exhaust. If you're interested in a hitch for your Palisade, the etrailer hitch # e95ZR mentioned above is a great choice. This hitch offers a maximum tongue weight of 750lbs, and a maximum gross trailer weight of 5,000lbs. To finish a towing setup you'll also need a ball mount # C45030, and trailer wiring # CU94FR.
    view full answer...
  • Recommended Trailer Hitch For 2015 Mazda CX-5 AWD To Tow Bass Boat
    I did some research and your 2015 Mazda CX-5s have a towing capacity of 2,000-lbs or less. Be sure to check your owner's manual for your specific towing capacity because that amount is your maximum capacity. To tow your boat, you will need: trailer hitch, wiring harness, ball mount, hitch ball, and hitch pin. To start, you will need a trailer hitch. I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver, Item # 76138, because it is a Class III hitch with more than enough towing...
    view full answer...
  • Recommended Trailer Hitch for 2017 Volvo XC60
    Yes, the Curt Class III Receiver Hitch # 13268 referenced in your question is confirmed to fit your 2017 Volvo XC60. This 2 inch receiver has a tongue weight capacity of 400 pounds and gross towing capacity of 4,000 pounds, although you will also want to check the vehicle's capacities as listed in the owner's manual. I have attached an installation video on a 2016 XC60 for you to check out. If you plan on doing any towing, I recommend the Curt T-Connector Vehicle Wiring Harness # C56355....
    view full answer...
  • Is There a Shorter Shank Option for Curt Fixed Ball Mount with 2 Inch Drop
    The Curt Class III Ball Mount with 2" Ball - 2" Drop - 7,500 lbs # C45036 does come with the hitch ball installed. The ball platform is 3/4 inches thick which is standard with a 1 inch diameter hole. This is the shortest option for that rise and drop. There is a lower rated option in # C45131 but it is only due to the smaller hitch ball that is 1-7/8 inch diameter. It still uses the same ball mount and just changes the hitch ball. There are longer options that are similar but nothing...
    view full answer...
  • How to Choose Right Ball Mount for 2010 Honda Odyssey Pulling 2008 Jayco Pop-Up Camper
    Rise and drop is going to be the most important measurement when it comes to a ball mount; getting a ball mount with an extended length will only be necessary if, for example, your hitch is underneath your vehicle quite a bit and you need the added length to clear that amount of space. In order to choose the ball mount with the correct rise and drop, there are a couple measurements you'll need to take. First, make sure both your 2010 Odyssey and 2008 Jayco are parked on level ground; you'll...
    view full answer...
  • Recommended Hitch and Trailer Wiring Harness for 2013 Kia Sorento
    Exactly what is included on a vehicle that has a "tow package" can vary considerably from one auto maker to another, and also from model to model and year to year. If necessary your local Kia dealership can look up your VIN to find out all of the equipment that was installed on your specific car at the factory. For wiring, if you do NOT have the tow package you can use Curt kit # C59236 or if you DO have the tow package instead use # C56332. Videos for both harnesses are linked for you...
    view full answer...
  • Recommended Parts For Towing Small Utility Trailer w/ 15-17 Coupler Behind a 2023 Subaru Crosstrek
    I recommend the etrailer Trailer Hitch Receiver # e98912 for your 2023 Subaru Crosstrek. This receiver has a 2" opening allowing for a larger selection of ball mounts and other hitch mounted accessories. When we installed this in our shop on a similar 2021 Crosstrek it had a hitch height of 15-1/4". The Ball Mount # C45030 has a 1" rise which will get you to 16-1/4" to mount the 2" Hitch Ball # 63845. For the wiring you will need the T-One Vehicle Wiring Harness # 118467. This will connect...
    view full answer...


< Previous
123. . .9



Do you have a question about this Trailer Hitch Ball Mount?


Info for this part was:

Employee Jackie C
Expert Research:
Jackie C
Employee Mike L
Expert Research:
Mike L
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Lindsey S
Edited by:
Lindsey S
Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video by:
Dustin K
Employee Amber S
Video by:
Amber S
Employee Chelsea B
Written by:
Chelsea B
Employee Wilson B
Updated by:
Wilson B
Employee Kristina F
Updated by:
Kristina F
Employee Mike S
Updated by:
Mike S
Employee Isabelle B
Updated by:
Isabelle B
Employee Michael H
Test Fit:
Michael H
Employee Bradley B
Installed by:
Bradley B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924