Recommended Trailer Hitch for 2011 Keystone Passport 245RB

Published 05/21/2020

Products Featured in This Question

Adjustable Width Trailer Hitch Receiver for RVs, 22" to 66" Wide

(565)

$431.33

Adjustable Width Trailer Hitch Receiver for RVs, 22" to 72" Wide

(565)

$450.73

1-7/8" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 2,000 lbs

(2619)

$12.45

2" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 7,500 lbs

(1358)

$12.80

Curt Ball Mount for 2" Hitches - 1" Rise, 2-1/4" Drop - 7-5/8" Long - 7,500 lbs

(3838)

$26.94

Curt 4-Way Flat Trailer Connector w/ 60" Harness and Wire Taps

(127)

$19.25

Question:

Thank you. I measured between the I-Beams and it comes to 68.5. Will that same part still work or I need to change to the 13703?

asked by: Dustin K

Expert Reply:

As long as your 2011 Keystone Passport 245RB has a box frame, C-channel frame, or I-beam frame that the frame members are no more than 66" apart, you can use the Curt Adjustable Width Trailer Hitch Receiver for RVs # C13704. This hitch can be bolted on to the frame with the included hardware and will provide you with a 2" receiver that will allow you to tow a trailer with.

To install a wiring harness to power the trailer lights on your Keystone Passport you can use the Curt Vehicle Wiring Harness with 4-Pole Flat Trailer Connector - 60" Wire Lead # C58044, which will connect to the tail light and turn signal circuits on your trailer and provide you with a 4 way harness for towing a trailer.

For a ball mount you can use the Curt # C45030, which uses a hitch ball with a 1" shank diameter. For a 2" trailer coupler you can use something like the # 63845 or for a 1-7/8" you can use the # 19260. I've also linked our entire selection of hitch balls with 1" shanks in case you need something different.

As I mentioned, I linked some parts, as well as some review videos of these parts for you to have a look at and search through that I do recommend checking out.

expert reply by: Erik B

Dustin

5/21/2020

Thank you. I measured between the I-Beams and it comes to 68.5. Will that same part still work or I need to change to the 13703?

Erik B.

5/21/2020

Yes. Instead of the # C13704 you'll want to use the Adjustable Width Trailer Hitch Receiver for RVs, 22" to 72" Wide # 13703 to fit on your trailer with a 68" wide frame.