bing tracking image
  1. Accessories and Parts
  2. Yakima
  3. Hitch Bike Racks
  4. Wheel Holds
  5. Wheel Trays
  6. HoldUp
Replacement Rear Bike Tray Assembly for Yakima HoldUp Bike Racks - Black
Special Savings on Select Yakima Products.
Yakima

Replacement Rear Bike Tray Assembly for Yakima HoldUp Bike Racks - Black

Part Number: 8890281
In Stock
ChristmasTree SantaHat Arrives before Christmas SantaHat ChristmasTree
$136.00
Retail:$175.09
You Save: $39.09
Accessories and Parts
Instant Rebate
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Replaces the rear bike tray assembly for your black Yakima HoldUp bike rack (Y02443, Y02443-2, or Y02445). Installs on the bike rack spine, this assembly is farthest away from your vehicle. Gray HoldUp racks need 8890198 instead. 1-800-940-8924 to order Yakima accessories and parts part number 8890281 or order online at etrailer.com. Free expert support on all Yakima products. Great prices and Fastest Shipping for Replacement Rear Bike Tray Assembly for Yakima HoldUp Bike Racks - Black. Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (50)
  • Q & A (0)
  • Videos (1)
  • Photos

Yakima Accessories and Parts - 8890281

  • Hitch Bike Racks
  • Wheel Holds
  • Wheel Trays
  • Yakima
  • HoldUp

Replaces the rear bike tray assembly for your black Yakima HoldUp bike rack (Y02443, Y02443-2, or Y02445). Installs on the bike rack spine, this assembly is farthest away from your vehicle. Gray HoldUp racks need 8890198 instead.


Features:

  • Replaces the rear bike tray assembly for your Yakima HoldUp bike rack (Y02443, Y02443-2, or Y02445)
    • Also works with 2-bike add-on (Y024556)
  • Installs on the bike rack spine, this assembly is farthest away from your vehicle


Fits:

  • Yakima HoldUp bike racks: Y02443, Y02443-2, and Y02445
  • 2-Bike add-on for Yakima HoldUp bike racks: Y02446

Note: Works with the black HoldUp racks only; gray HoldUp racks need 8890198 instead.


Diagram pointing to the front and rear wheel tray assemblies on the black Hold Up bike rack


8890281 Replacement Rear Bike Tray Assembly for Yakima Hold Up Bike Racks - Black




California residents: click here


Video of Replacement Rear Bike Tray Assembly for Yakima HoldUp Bike Racks - Black

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Review of the Replacement Rear Bike Tray Assembly for Yakima HoldUp Bike Racks

A lot of things can happen on the road, whether you just back into something or someone maybe just clips you in the parking garage. Well, if you have the Yakima holdup bike rack, we have a lot of different replacement parts, but today we're going to be taking a look at the rear wheel assembly. Whenever you first assembled this bike rack, you probably noticed that it's extremely easy to put together and replacing the parts are going to be just as easy. So let's go over that installation process with you now.All we need to do to remove the part is going to be four little bolts here, and you can either have it down, have it up. I'm just going to do it like this, just because I think it's going to be a little bit easier. Go ahead and grab your allen key and I suggest doing the top ones first.

Once we get these out, you can go ahead and do whatever you want with them, the replacement part does come with the hardware.Once it's done, all you got to do is pull it up and we're ready to replace it. Now we can go ahead and take our replacement part, it's nice and shiny. We can go ahead and remove our hardware. It's going to be the same exact hardware that we removed on our old piece. So use the same exact allen key to get them undone.

We want to make sure that we put this in the right direction, so all you have to do is really look at one of them and we're going to do the exact opposite of that.So we have our wheel cradle over here and we're going to go ahead and put this week cradle on the other side, face it like this, and then you go can ahead, hold it into place like before. I do suggest starting with the top ones. Just thread that in by hand real quick.And then we can go ahead and tighten them all down evenly, going back and forth between the two. And we are going to have these oblong holes here so we can go ahead and move it however we see fit. It all just depends on what you guys think is best for your bikes.

And once everything is nice and tight, always just double-check all of the bolts. Make sure that they didn't loosen up as you started tightening everything else down.Once that's good, then we are done. And that's going to do it for the replacement rear wheel assembly on the Yakima holdup bike rack..

Customer Satisfaction Score:

Ratings & Reviews

5.0

50 reviews
Replaces the rear bike tray assembly for your black Yakima HoldUp bike rack (Y02443, Y02443-2, or Y02445). Installs on the bike rack spine, this assembly is farthest away from your vehicle. Gray HoldUp racks need 8890198 instead.

by:

Ordered from Joshua, and it was a very positive and professional experience. We ran through some possibilities and options and we settled on the right part. It came on schedule and it was an easy and straightforward installation. Thanks JT.

Gwendolyn Y. profile picture
Etrailer Expert

Gwendolyn Y.

2/27/2025

Hey Rex. The rack looks great on your truck! Where do you like to take your bikes?

Rex profile picture

Rex

3/3/2025

@GwendolynY I just started Mountain Biking in 2021. Because of health issues and successful outcomes, I finally got in a full season in 2023. I ride a BMC hardtail and recently a full suspension Transition Spur. Both 29´ers with modern geometry. I ride the bike trails in Brown County State Park, Nashville In. Great trails for all levels of expertise. Now with a new rear assembly, I can take both bikes to the Park. A trail buddy gave me the rack after he drove through a storm and a tree limb fell on it!
Gwendolyn Y. profile picture
Etrailer Expert

Gwendolyn Y.

3/3/2025

@Rex Thats awesome! I reached out to one of my coworkers that is pretty much our #1 bike enthusiast here and he geeked out a little reading your comment. We also looked up Brown County State Park and the trails there look amazing! Thanks for sharing your story with me.


by:

Fast shipping, easy install! Saved a ton of money only having to replace 1 tray instead of the entire rack.

Brooke M. profile picture
Etrailer Expert

Brooke M.

6/18/2025

Definitely nice to have the replaceable parts available! What kind of biking do you do?



by:

I was surprised I could order a replacement bike holder for my Yakima rack. The price was fair and installation was easy.



by:

I backed my bike rack into a wall on a Thursday. I ordered this part from etrailer on Monday. It arrived on Wednesday. Installed this part on Saturday! What could be easier than that!? I have ordered from etrailer before and it's like a no-brainer. The items are just as described, fair price, come quickly. I'll continue to use etrailer in the future. As for the Yakima part, this is the best bike rack I've ever used and not the first one I've tried to destroy! I highly recommend the HoldUp carrier and this part just bolted right on.

John profile picture

John

11/19/2018

The replacement parts for the rack worked perfectly and I have spent the last year trying my best to wear them out!



by:

So easy to install! It makes my rack look new! Plus quick service. Less than one week.



by:

Works great

George profile picture

George

8/4/2025

Works fine after a year of heavy use. Great product.



by:

This is a great rack! And great service to replace part I broke.



by:

I’m very happy that replacement parts are available to repair my Yakima hitch rack. I am pleased with both the price and availability to get what I needed... thank you!



by:

Package was damaged, but fortunately the part was still in good condition. Everything delivered on time and as promised - great job. Easy to install even with no instructions.



by:

The purchase and deliver was fast and efficient. The website is very easy to navigate also! After I received my purchase, I got an email on instructions and tips for how to put everything together, super helpful! Thanks guys!



by:

Just what I need for my bike rack! Bought the front one about an ago. The rack didn’t look completel with out the back tray. So i ordered from you guys , because I was happy with the service and quick delivery! Good job!



by:

Perfect replacement part for my Yakima bike rack. I was horrified when I damaged my Yakima bike rack that was on my car while taking my wife’s car out of the garage. I know what a goof. Luckily etrailer.com had the entire rear assembly, four bolts and it’s good as new. I use this rack 3 or 4 times a week so I had to have it right. For 1/3 the cost of a new rack I’m back up and running. Thanks etrailer.com!

Kenneth profile picture

Kenneth

3/21/2021

No problems



by:

My item arrived faster than expected and was exactly what I needed! Thanks etrailer!



by:

One arm of my Yakima Hitch mount rack was damaged when a truck backed in the rear of my vehicle. I ordered the replacement arm which etrailer was the only only retailer to have in stock. Shipping was quick and I was back with bikes on the rack in a mattter of days. etrailer is my goto when ordering receivers and hitch mount accessories for our two vehicles.




by:

You're already here because you know etrailer is great. Just like every other purchase, this one was smooth. The price was fair (can't find it cheaper anywhere) and shipping (free) was fast.
If only the Yakima arms could be repaired instead of replaced since it's just a single bolt inside the ratchet that fails. That said, it did last ten years. I had fabricated a temporary fix, but decided to treat myself to an early holiday gift with this replacement.
Don't forget that you can use your old lock by using the blank key to remove it from the old rack. Super easy and allows you to retain the single key use.



by:

etrailer.com is awesome! Such a great selection of parts even for older model bike racks. This bike tray was exactly what I needed and included all the parts necessary for install. Shipping was super fast and the product arrived in great condition. I'll definitely be coming back here for any other parts I need.



by:

The bike rack replacement tray is the exact same fit and finish as the original one that I ripped off going out my garage. Easy to install and adjust. Videos on site show install instructions. It supposedly comes with a key and the remover key, but mine did not. Luckily I had a remover key already and I replaced the lock core with the one that was in my original part. Not a big deal because I was able to get the core out.



by:

I had a bike tray that was rusted from exhaust moisture, and needed to be replaced. eTrailer made it super easy to identify the correct replacement part, had good pricing, and, of course, excellent information and customer service. The replacement tray was super easy to install, and I was able to order new lock cores to match my existing locks.



by:

This was a replacement part for the HoldUp 2. It works very well with all sorts of different style of bikes. Etrailer did and excellent job of shipping the part fast and they were fantastic with their communication from order status through shipping.



by:

The Yakama Bike Rack has worked well without any difficulties. So much easier to use than my other racks I had invest in.



by:

Great product easy to order and install on the base.



by:

Lightning fast delivery, very appreciat ive



by:

Shipping was timely and tracking was is, also the ordering process was smooth.



by:

Product looks great, came in solid shipping container. Thanks etrailer!



by:

Fast, exactly like the description, no mistakes. Excellent provider of parts.


25
50
Show More Reviews

See what our Experts say about this Yakima Accessories and Parts

  • Replacement Bike Tray Assembly for Yakima HoldUp Bike Racks
    The model number for a Yakima HoldUp bike rack like item # Y02443 will be on the rear side of the front cradle facing away from the vehicle as shown in the picture below. If you have a black Yakima HoldUp bike rack or the 2-bike add on item # Y02446 you'll need one of the following wheel assemblies to replace an arm. The arms are not sold separately. These will not work on the HoldUp Evos. Replacement Rear Wheel Assembly for Yakima HoldUp Bike Carriers item # 8890281 Replacement Front...
    view full answer...
  • How to Get Replacement Front Arm for Yakima HoldUp 2-Bike Rack
    We do have the correct part for you, but the 8880833 is only a fit for the Yakima HoldUp EVO Bike Rack , as opposed to the standard Yakima HoldUp bike rack. Based on your photo, you do not have the EVO, you have the standard HoldUp. The arms are not available by themselves for the HoldUp, for a bent arm you'll need to replace the wheel assembly, and I have added a photo showing the difference between where on the rack the assemblies fit: - Replacement Rear Wheel Assembly for Yakima HoldUp...
    view full answer...
    Image 1 for Image 2 for
  • Correct Replacement Wheel Assemblies for the Yakima HoldUp 2 Bike Rack
    I did some research and it appears that the numbers you gave go to the Yakima HoldUp Bike Rack for 2 Bikes # Y02443. With that being said, since you're needing to replace a broken arm you are actually going to need to replace the entire wheel assemblies with both the Replacement Front Bike Tray Assembly for Yakima HoldUp Bike Carriers # 8890280 & the Replacement Rear Bike Tray Assembly for Yakima HoldUp Bike Racks # 8890281 as just the replacement arm is not available. If you have the...
    view full answer...
  • Replacement Wheel Assembly For a Yakima HoldUp Bike Carrier
    To ensure you get the correct replacement cross arm for your Yakima HoldUp bike carrier, we will want to know if you have the newer style black model or the older style gray model. If you have the older gray model, then you will want either the Front Replacement Wheel Assembly, # Y90197, or the Rear Replacement Wheel Assembly, # Y90198. The front wheel assembly is the wheel tray that is closest to the vehicle (see photo). The rear wheel assembly can be identified by the Yakima sticker on...
    view full answer...
    Image 1 for
  • Replacement Rear Wheel Assembly for Yakima HoldUp Bike Rack
    I'm sorry to hear that you were hit by a car (hopefully you're ok!) and we do have exactly what you need, though the arm by itself is not something that is available from Yakima as a replacement part. For your Yakima HoldUp 2-Bike Rack # Y02443 you will need the Replacement Rear Wheel Assembly for Yakima HoldUp Bike Carriers # 8890281. Just in the interest of thoroughness (because front and rear can be confusing on bike racks) I did add a photo showing the difference between the Rear...
    view full answer...
    Image 1 for
  • Replacement Front Wheel Assembly for Yakima HoldUp Bike Rack
    The part closest to the car is actually the front wheel assembly. If you have the older style gray Yakima HoldUp you need Replacement Front Wheel Holder Assembly # Y90197. For the newer style black Yakima HoldUp you need the Replacement Front Wheel Assembly # 8890280.
    view full answer...
    Image 1 for
  • Replacement Wheel Assemblies For The Yakima HoldUp 2 Bike Rack
    For your Yakima HoldUp Bike Rack for 2 Bikes # Y02443 we have the Replacement Front Wheel Assembly for Yakima HoldUp Bike Carriers # 8890280. If you ever should need the rear wheel assembly, you can use the Replacement Rear Wheel Assembly for Yakima HoldUp Bike Carriers # 8890281.
    view full answer...
  • Replacement Trays for Yakima HoldUp Bike Rack
    To replace one of the arms on your Yakima HoldUp Bike Rack for 4 Bikes # Y02443-2 you'll have to replace the entire tray since the arm isn't available as it's own part. You'll need part # 8890280 for the front (closer to vehicle) tray or part # 8890281 for the rear (further from vehicle) tray. The max tire width for 29" tires is 2-1/2" which is why your new bike feels snug. The spines for the HoldUp and HoldUp EVO are different so the only way to get the correct size for your wider tires...
    view full answer...
  • Parts for Yakima HoldUp Bike Rack to Make Assembly
    If you already have one of the wheel assemblies you will need other parts, including the other wheel assembly as well as the spine assembly and tongue assembly, which is packaged together. So you will need both the Front Wheel Assembly for Yakima HoldUp Bike Carriers # 8890280, Rear Wheel Assembly for Yakima HoldUp Bike Carriers # 8890281 and Replacement Spine for Yakima HoldUp 2 Bike Rack for 1-1/4" Hitches # Y8890278 which says "Spine" but is actually the spine assembly and tongue assembly...
    view full answer...
  • Can Replacement Tray Assemblies be Ordered for Yakima Holdup Bike Rack
    Yes you can order an entire tray assembly for the Yakima Holdup # Y02443 with the part # 8890280 for the front tray or # 8890281 for the rear tray.
    view full answer...
  • Wheel Assemblies That Fit Spine for Yakima Plus 2 2-Bike Add-On for Yakima HoldUp
    Yes, the Rear Wheel Assembly for Yakima HoldUp Bike Carriers # 8890281 is the entire assembly and you will also need the Front Wheel Assembly # 8890280 to go with the Replacement Spine for Yakima Plus 2 2-Bike Add-On for Yakima HoldUp # Y8890279. When you combine the assemblies and spine you will have the Plus 2 2-Bike Add-On for Yakima HoldUp for 2" Hitches # Y02446.
    view full answer...
  • Replacement Rear Wheel Assembly Availability for Yakima Holdup Bike Rack
    We have the exact part you are looking for, part # 8890281. This is the replacement rear wheel assembly for your Yakima Holdup bike rack. The part # 8890280 is the front wheel assembly.
    view full answer...
  • Is Wheel Assembly for Yakima HoldUp Bike Rack Compatible with 27.5" Diameter x 2.8" Wide Tires
    The Replacement Rear Wheel Assembly # 8890281 can accommodate 20" - 29" wheel diameters and up to 2-1/2" in width. So the diameter works but your tire width is slightly too much. This is a replacement wheel assembly for the Yakima HoldUp Bike Racks # Y02445 and # Y02443. If you are in the market for a bike rack I can make a few recommendations for you. If you like the Yakima design and want to stick with that brand then the Yakima HoldUp EVO is the best choice for you as it accommodates...
    view full answer...
  • What Type of Tools Is Used to Install Replacement Rear Wheel Assembly for Yakima HoldUp
    I don't have an exact size, but you will use an Allen wrench to install the part # 8890281. The size is a common medium size that if you have a set you will have the correct one. Since Allen wrenches aren't commonly sold individually a specific size wouldn't be much help anyway.
    view full answer...

Do you have a question about this Accessories and Part?


Info for this part was:

Employee DeAnne T
Written by:
DeAnne T
Employee Jameson C
Expert Research:
Jameson C
Employee Dustin K
Video Edited:
Dustin K
Employee Rachael H
Updated by:
Rachael H
Employee Wilson B
Updated by:
Wilson B
Employee Brian T
Updated by:
Brian T
Employee Adam E
Installed by:
Adam E
Employee John S
Video by:
John S

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924
<