Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"

Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"

Item # 75528

lowest price pledge

Retail:$189.36

Our Price: $91.20

You Save: 52%
Trailer Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

This item qualifies for Free Shipping

Shipping Weight: 24 lbs

Arrives before Christmas with Ground or 3 Day Shipping.
Quantity: 
In Stock, Ships Today
Draw-Tite 750 lbs WD TW Trailer Hitch - 75528
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

spin image icon
Draw-Tite 750 lbs WD TW Trailer Hitch - 75528
75528 - 5000 lbs GTW Draw-Tite Trailer Hitch
75528 - Concealed Cross Tube Draw-Tite Custom Fit Hitch
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" 750 lbs WD TW 75528
Draw-Tite 750 lbs TW Trailer Hitch - 75528

In Use/Installed

Trailer Hitch 75528 - 750 lbs WD TW - Draw-Tite on 2011 Chevrolet Traverse
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" 5000 lbs GTW 75528 on 2011 Chevrolet Traverse
Draw-Tite Trailer Hitch - 75528 on 2011 Chevrolet Traverse
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" 5000 lbs GTW 75528 on 2011 Chevrolet Traverse
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" 5000 lbs GTW 75528 on 2011 Chevrolet Traverse
75528 - 750 lbs TW Draw-Tite Trailer Hitch on 2011 Chevrolet Traverse
Draw-Tite Trailer Hitch - 75528 on 2011 Chevrolet Traverse
Draw-Tite Custom Fit Hitch - 75528 on 2011 Chevrolet Traverse
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" 750 lbs TW 75528 on 2011 Chevrolet Traverse
75528 - Concealed Cross Tube Draw-Tite Trailer Hitch on 2011 Chevrolet Traverse
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" 2 Inch Hitch 75528 on 2011 Chevrolet Traverse
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" Concealed Cross Tube 75528 on 2011 Chevrolet Traverse

Customer Photos


  • Draw-Tite
  • Class III
  • 2 Inch Hitch
  • 5000 lbs GTW
  • 750 lbs TW
  • Custom Fit Hitch
  • Concealed Cross Tube
  • 7500 lbs WD GTW
  • 750 lbs WD TW
Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection. Lowest Prices for the best trailer hitch from Draw-Tite. Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" part number 75528 can be ordered online at etrailer.com or call 800-298-8924 for expert service.


  • All Info
  • Reviews (1253)
  • Q & A (159)
  • Videos (18)
  • Photos
  • Why etrailer?

Draw-Tite Trailer Hitch - 75528

Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.


Features:

  • Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
  • Computer-aided, fully welded steel construction ensures strength and durability
  • Tested Tough - safety and reliability criteria exceed industry standards
  • Easy, bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Black powder coat finish covers e-coat base for superior rust protection
  • Stylish, round-tube design
  • Ball mount, pin and clip sold separately


Specs:

  • Receiver opening: 2" x 2"
  • Rating: Class III
    • Maximum gross trailer weight: 5,000 lbs
      • Maximum GTW when used with weight distribution: 7,500 lbs
    • Maximum tongue weight: 750 lbs
      • Maximum TW when used with weight distribution: 750 lbs
  • Spacer block dimensions: 2" long x 1" wide x 1/4" thick
  • Limited lifetime warranty


Draw-Tite Tested Tough

Draw-Tite Tested Tough

Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.



Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.


In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



75528 Draw-Tite Class 3 Trailer Hitch Receiver - Max-Frame

87435 Hidden Hitch Class 3 Trailer Hitch Receiver



75528 Installation InstructionsInstallation Details 75528 Installation instructions

This Product Fits The Following Vehicles

2007 - 2016 GMC Acadia

2017 - 2017 GMC Acadia Limited

2008 - 2017 Buick Enclave

2007 - 2010 Saturn Outlook

2009 - 2017 Chevrolet Traverse

2018 - 2018 Chevrolet Traverse Limited



Video of Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Trailer Hitch Installation - 2015 Buick Enclave - Draw-Tite

Today we're going to be taking a look at then installing the Draw-Tite Max-Frame custom fit trailer hitch receiver. This is a class III 2-inch hitch. Part number is 75528. This going on our 2015 Buick Enclave. Here's what the hitch is going to look like once we've got it installed into the vehicle. That's right, we're going to be able to put our cover back on. We're not going to have this blank opening here with just a hitch sticking out where we can see it as we go. Just turn in the two set screws down here, kind of pulling down on that.

That's going to allow us to separate it. As you can see, the hitch tucks up nicely. It's a round tube design so if you are going to be leaving that cover open you don't have one of the large square kind of blocks hanging down. We've got a tab here if you plan on putting in a four-way pull or a seven pull-plug, we can easily attach it there. Of course, it's going to have safety chain hooks.

It's got a little extra steel right here around this front section to give us a little extra support and it's going to be fully welded all the way around our tube. It's a full pass through. It's just really nice good looking hitch that we can cover up when it's not in use. As you can see, it's been designed for a standard 5/8 pin to pass through but it's also got this slightly smaller hole here. That's going to be for the J-pin. It's made by Draw-Tite.

It's a J-pin stabilization system. So if you'd like to use that set up, ready to go. The maximum tongue weight that we've got on our hitch is 750 pounds. The maximum gross trailer weight rating is going to be 5,000 pounds. You will want to look into the Buick's owner's manual just to make sure of what the vehicle's capacity is as well and you'll want to use the lower number of those. Let's go over a couple of different measurements that are going to help you in selecting your ball mount, bike rack, or maybe a cargo carrier. To start with we've got the measurement from the center of the hitch pin hole to the outermost edge of the bumper.

That's going to be about 4 inches. Now from the ground to the inside edge of top tube of the receiver opening we're going to have about 18 1/8 inches. So, just keep these in mind when making your selections. First step's going to be to remove our access panel located underneath. We've got a couple of just kind of turnstile fasteners here. Just rotate those both 90 degrees. We can separate those. Then you've four tabs across the top here that kind of clip in. Just set that aside for now. Let's take a strap and you're just going to bring it across underneath your exhaust here somewhere where you can get it hooked in on both sides and we'll take some slack out of it. This is going to provide some support for our exhaust, as we lower it down it's going to have something to rest on so it's not resting or causing undue strain on the front part of the system there. Now on both sides of the vehicle we're also going to have two rubber isolators or exhaust hangers that we also need to remove. We've got one located here on the top. That's the easy one. The one here is a little more difficult. It's located just to the outside of your tailpipe assembly there. So we'll hit these both with a little bit of spray lubricant just to kind of help us in removing them. Do the same thing to the two located on this side. Now we'll come through and just start pulling our hangers off. Sometimes you may need a pry bar or something. Whatever you need to do to get them off. All right, you see, that's just going to give us that little bit of extra space we need to get our nuts in there. Now for installing our hitch we're going to be using the two weld nuts located on both sides. These are just above our tailpipe. That's going to get the 12 millimeter by 45 bolt and a conical toothed washer. The conical toothed washer will face in towards our hitch and will be sandwiched in between there. For our middle two mounting locations, here and here, we'll be using a weld nut that will go up through and then a half inch bolt by an inch and three-quarter, that's also going to have a conical toothed washer and that washer should face up. And our two others are located here on the driver's side. Now we're going to go through, use a little bit of spray lubricant in each of our weld nut locations. Remember, we've got the two here on the driver's side and the two on the other side. We're just going to clean these out. This is part number 814092 if you don't already have one. And now we'll check each one to make sure our bolts will thread in properly. We'll now just kind of slide our hitch up into position here and now we'll start one of our M12 fasteners right up into the weld nut. We'll want to do this on both sides so just do it loosely for now. And we're going to be putting one bolt in each of the weld nut locations. Now for our middle connection points as we discussed we're going to put a handle nut up and in. We've also got our bolt and our conical toothed washer but now there's one last important step that you want to remember. That's that we've got a spacer block that should be put in between the hitch and the bottom of our vehicle. We're welding that in to where it will sit right over, or our handle nut, to where it will sit right over the hole. Thread that in just to get it started. We want to leave enough room on the side here so we can still get our other spacer in. And we just need to take a quick look to be sure we've got our hitch centered and with it set up we can just start tightening our fasteners down. It's now time to go around to each of our fasteners and torque it down to specification just referring to your instruction booklet there, it's going to tell you exactly what torque you should set. Now let's go back through and reconnect our four exhaust hangers. With our exhaust re-secured let's just come around and take out our strap. That's going to complete today's installation of the Draw-Tite Max-Frame trailer hitch receiver. Part number 75528 on our 2015 Buick Enclave. .


Customer Reviews

Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" - 75528

Average Customer Rating:  4.9 out of 5 stars   (1253 Customer Reviews)

Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.

- 75528

by:

Chevrolet


2017 Chevy Traverse Super easy installation. I was able to install it myself. There were a few issues I had to overcome however: 1. Getting the plug into the wire harness underneath the vehicle took quite a bit of time as it is very hard to get to. I ended up having my wife help me by pulling the plastic body piece out so I could get my arm in to reach it better. 2. The YouTube video is very helpful for the most part however, There is a discrepancy between the directions that came with the wiring harness and the fuses/relays that were included. Follow the instructions that come with the harness and it will be alright. Do not rely on the Youtube video for this portion of the install. 3. The plug connector that attaches to the hitch itself needs a mounting bracket that IS NOT included with the hitch. The bracket is easily found at an automotive parts store but take the connector with you to make sure it fits properly onto the bracket. Other than these minor (and somewhat confusing) issues this tow package was easy to install and it is VERY well built. 572927


Comments

The the 4-pole wiring bracket you need to attach to the existing bracket on this hitch is part Item # 18144. If you need a bracket for a 7 way plug I recommend part # PK12711U.

-- Heather A - 10/09/2018

44450

- 75528

by:

2011 Chevrolet Traverse


Came in a timely fashion, and was just as described. Easy to have put on and is working well. 574891



- 75528

by:

2015 Chevrolet Traverse


This was an amazing deal and an amazing product. I received my package on time and installed it the next day. The hitch installed very easy. I was impressed with the fact that the install videos were linked with my receipt and I used them to install the hitch from my cell phone under the vehicle. The hitch fit like it was supposed to and tucks up inside the bumper like a factory hitch. Very pleased with the whole process from buying, to receiving and to installing. Would buy from these guys again and again. Thank you for a great experience 571218



- 75528

by:


I was impressed with the quality of the product. I was dreading trying to get the nuts in place for the bumper bolts. I was surprised to see two nuts with metal straps included in the hardware. It was very easy to place the nuts into their proper place and complete the process. That was a perfect solution. Installation took a little longer because i had to clean up the rusted frame threads. Too bad GM doesn't put plastic caps into the threads to keep them from rusting beyond use. Otherwise I am thoroughly pleased with the hitch, mounting instructions and the ease of installation. 435957


Comments

The hitch is in constant use with bike rack carriers and no problems. Outstanding!

Steve - 09/26/2018

44061

- 75528

by:

2009 GMC Acadia


Researched the product as well as the company. I was satisfied with my decision and also reviewed videos for installation and additional items I may need to purchase. Made the purchase and I was immediately contacted to inform me my order was being processed and shortly after, I was notified the items had shipped. I was told when to expect the shipment. From the first keystroke of the order until the final turn of the installation, everything was first class and exactly as advertised. Items arrived on time, the fit was right on and would recommend etrailer and Draw-Tite to all. 568541



- 75528

by:


Ok, now down to the meat of my install. After carefully chasing the four weld nuts and fighting an exhaust system that would not cooperate, my son and I got this bad boy up in no time. Despite the fact that it was 98 degrees that day! It fit perfectly. The only issue was finding the torque specs which we found printed on the back of what appeared to be the French version of the install instructions. Still give five stars! The help I received ordering all my parts over the phone was second to none! Even considering it was a Saturday! Thanks to everyone involved!!! 567385



- 75528

by:

2011 Buick Enclave


delivered on time. Box was beat up,but all the parts were there. Fit well and install was easy. 566534



- 75528

by:

2016 Buick Enclave


Our first Enclave came with the hitch package but we were not able to get it with our new one. I ordered this kit and it went in very smoothly. The truck comes prepared for this so all you have to do is drop the exhaust (easy) and bolt this on. 434012


Comments

Still happy with the product and have recommended you to others who need hitches.

Jasper43 - 09/19/2018

43759

- 75528

by:

2014 Chevrolet Traverse


This is was the first towing hitch I have installed. Installation was easier than I thought, took about an hour and a half including, gathering of tools and exhaust system cooling time and a single set of hands. What I liked about the hitch receiver were the tolerances to which it was made, it had very little movement at the time of adjustment for final torquing of bolts. Also, once the factory hitch cover goes back on, there is no way to tell if one is on. The only problem is that if you have a cargo carrier to use like mine, it is difficult to insert a keyed locking pin as there were only about 5 inches to work with, still recommend. This was installed on a 2014 Traverse. The videos on Etrailer are extremely helpful, I felt more comfortable doing the install by myself. Saved me at least $200. 144395


Comments

It has been working out well. No problems at all. No vehicle should be without.

Juan T - 11/26/2015

16000

- 75528

by:


The towing hitch showed up in good condition and I installed it. It was easy to install and is not an eye sore to my car. Thanks 125461


Comments

just as happy with it as the day I installed it. Thanks

jaron r - 04/16/2015

10876
Comments

just as happy with it as the day I installed it. Thanks

jaron r - 04/16/2015

10877

- 75528

by:

2014 Buick Enclave


Installed on a 14' Buick Enclave. etrailer has fantastic instructions and support I knee what had to be done before hitch arrived. No surprises and was able to tow from TX to WI with no issues. Took about an hr to install by myself without lifting car. Also took pictures to document process. I did have one minor issue when I arrived at the trailer rental place and running lights didn't work. A fuse blew after 1st trip with it. Replaced and haven't had issues since. Very minor and don't think reflects any negativity onto quality of product. I also highly suggest purchasing plug clip mount with this hitch. If not the plug is dangling and it's not expensive to add the mount. Glad I did and it looks nice. 514224



- 75528

by:

2012 GMC Acadia


I received the hitch, ball mount and wiring for my 2012 Acadia within just a couple of days after placing the order. The entire order was well packed in very heavy cardboard and was still in good condition upon arrival. I finally got around to putting it on today and as some others have indicated taking loose the muffler hangers and reinstalling them is probably the worst part of the job. I used some of my wifes vegetable spray and that helped a great deal. I did need my wife to help hold up on the hitch as I got the bolts started so we made a family project out of it. 74966


Comments

Yes, we still like that the hitch has the capability of being hidden withthe optional cover that we purchased for our 2012 Acadia. We will be using it again shortly to trailer our golf cart up to the campgrounds.

-- comment by: Harry E - 04/10/2014

3520

- 75528

by:


Unbelievable service/support!. Let's start with shipping...2 1/2 days, delivered a whole day ahead of estimated arrival date. Product - superb. Didn't make the 1/2 install time on the hitch as I was working by myself (that sucker is heavy!) and when I went to lower the dual exhaust, got one of the hangers but not the other. Found this out when I went back to put the one I took off back on. My bad. So I was still able to install the hitch but couldn't get my torque wrench in there to do it proper. Will have to go back and do again but I was still able to install tightly to tow a little 4' X 7' utility trailer no sweat. Will probably have the hitch welded to the frame since its hidden when not in use. Electrical Install....another piece of cake with one minor exception. The directions indicated to attach the black wire coming from the battery to the RED wire coming out of the module. There is no RED wire coming out of the module, it's black also. My knowledge of DC wiring told me to go with it. I did, everything worked great. As previously reported, the green wire going to the passenger side was a little short (probably due to my routing) but the black wire going to the battery was about a foot long (I liked that)! I'm not real happy about my routing so I will go back and redo when I get the hitch welded. I want a really good job and the initial install I was under to gun to rush the job so I had to take a couple of harmless shortcuts. When I do the redo, I'll document for etrailer.com, they are most deserving in my book! I most strongly recommend these folks at etrailer.com. In fact, I need to go back to them for the 4 wire flat connector bracket and their 2" ball. Was in too much of a rush this go-around. . 148764



- 75528

by:

2017 Chevrolet Traverse


I just installed my hitch. It's not often that things are as easy as you are told they are going to be, but this was one of those times!!! Thank You. 565422



- 75528

by:

2009 Chevrolet Traverse


i bought the hitch package, hitch, harness and ball mount. the materials are first rate and well made. installing the hitch took less than 30 minutes. instructions said to drop the muffler on the passenger side rear for access to the holes, but on the 2009 traverse i had room without dropping the muffler. the wire harness took a couple hours thru no fault of the product. i had trouble getting one of the taillight assemblies out. very happy and recommend the product to anyone. thanks much!!!!!! 183277



- 75528

by:


Like many others stated, super easy installation of the hitch. Only took me about 30 min by myself. It took me about an hour for the wiring harness and bracket since I had to find another bolt and nut since it only came with 3. The thing that gave me the most trouble was the wiring harness. I couldn't bring the cannon plug down towards me at all so I had to do it all by feel. The mounting bracket for the wiring harness I chose to flip upside down and bend towards the rear of the car and down so I could hide the wiring and hitch completely. The other reason was because I didn't want the bracket to catch on anything because it was lower than the bumper. I ordered the supplies on Fri and they were here mid day the following Tuesday. With all the great videos, a job that might have taken me 4-5 hours only took 2 hours plus knowing where the cannon plug was helped tremendously. If I hadn't known where it was I would have prob had to do a splice job. This job, in my opinion, looks professional. Thanks ETRAILER. 399633



- 75528

by:

2008 GMC Acadia


Perfect fit on GMC acadia 2008. Easy to install, thanks to the instructional videos. Distance from center of 5/8 pinhole to farthest part of bumber is around 5 inches. There is also a 1/2 hole. Arrived on time. Perfect fit with mounting bracket 18144. Wiring harness 118451 was also easy to install. 39220


Comments

Neil, did your hitch cover go back on?

-- comment by: Will - 08/12/2015

14169

- 75528

by:

2015 GMC Acadia


This product is exactly what it advertises. Extremely easy to install. This is on a 2015 GMC Acadia. Solid piece. There are pre-drilled holes in the Acadia, so it takes the guess work away. You just have to move the 1 rubber piece holding the muffler for easier access. Other then that, it's easy. Highly recommended this product. 512340



- 75528

by:

2010 Saturn Outlook


I purchased this hitch for my 2010 Saturn Outlook to haul our Boy Scout Troop's trailer for an upcoming campout. I watched the video associated with the product a few times before the hitch came so that I knew how to install it. The suggested install time said 45 minutes, but it took me over 3 hours. However, this was not the fault of the hitch, it was due to me not realizing there were 2 gaskets instead of 1 to lower my 2 mufflers, installing this by myself (it got heavy holding it up by myself), and mainly to having 7 years worth of rust, dirt and debris in the bolt holes under my vehicle. It took me a long time to get the bolts started in the holes. I ended up going to an auto parts store to get some rust removal and more spray lubricant. After I had ordered the hitch, I saw a recommendation for a wire brush. I REALLY wish I had ordered it. The auto parts store I went to did not have one. After a lot of trying to muscle the bolts on, what finally worked was spray a lot of rust removal in the hole. Then I sprayed a lot of spray lubricant in the hole and on the bolt. Once I got the bolt started, I tightened the bolt until it stopped moving. I then removed the bolt, wiped off all the rust on the bolt, re-lubricated the bolt and put it on again going further than the previous time. I repeated this step many times for each of the 4 bolts. It took me 2 hours to figure out this procedure. As soon as I did, the hitch went on easily. It fit the mountings perfectly and looks great. Once I figured out how to clean out the rust and get a good thread going, it went on easily. The directions and video were excellent. I would recommend this hitch to anyone looking for one and tell them to buy the recommended wire brush, take their time to work through the rust, and use a lot of spray lubricant. 409035



- 75528

by:

2012 Chevrolet Traverse


I bought the Draw-Tite Class III 2" Trailer Hitch Receiver for my '12 Chevy Traverse. I got it for one main reason, a new hitch mounted bike carrier. I was a little nervous about ordering it, because I was worried about the fit, and I don't have any experience with trailer hitches. Prior to ordering it, I did a little research on the website. I plugged in the year, make and model of my car, and the site gave me a few options for custom fit hitch receivers. I picked the one that I wanted, and then I looked over the instructions, Q&A, and watched the installation video. The video is what really swayed me, it looked really simple! I was right. When the hitch receiver arrived, I was surprised at how light it was, it was lighter than my bike carrier! I will say that the included instructions are a bit lacking. I think some larger and more clear pictures with the appropriate step would be helpful. Thankfully, the website does a fantastic job with the installation instructions, and again, the video was a HUGE help! When I first tried to install it, I couldn't get the appropriate bolts into the weld nuts. I had cleaned them with some WD-40 and a wire brush, or so I thought. I thought that I was sent the wrong size bolt because the teeth would not even grab into the weld nut, and it just kept spinning; I was aggravated at the thought of waiting for replacement parts. But, I went back to the website and looked a little further into the Q&A section, and I found another video on cleaning the weld nuts. In the video, it described my exact issue, and even explained that despite one's belief that the bolts would not fit the weld nuts, 99% of the time the weld nuts were not thoroughly cleaned out. Well, guess what? I went back to cleaning the weld nuts, and after a total of roughly 4hrs and some serious elbow grease and a full can of WD-40, I had cleaned out the weld nuts enough so that the bolts fit with ease! My '12 Traverse has about 37K miles on it, so there was a lot of rust and grime in there. After getting the weld nuts clean, the actual installation of the hitch receiver took me maybe 45mins. And I had no issues with installing it by myself. I did have to lower my spare tire in order to get my torque wrench in there, but other than that there were no major issues. I can't imagine paying a couple hundred $$ extra to have a professional install this. Even if someone had absolutely no mechanical ability whatsoever, they could install this themselves; just watch the video and follow the instructions. Honestly, I think I've had more difficulty in helping my kids build their LEGO sets, than I did installing this hitch! I would highly recommend etrailer.com to anyone looking for a hitch, and I am extremely pleased with the ease of the entire process, from finding the right product to delivery to installation. Although I didn't deal directly with customer service, I'm sure that if you can't find an answer to your question on the website itself, someone from customer service would certainly be able to help you. Thank you etrailer! 261694


Comments

Its been a year since my purchase, installation, and initial review. I have had no issues with the hitch and no complaints. I will definitely be looking at Etrailer should I need any other trailer hitches, parts or accessories!

Matt B - 06/18/2017

25093

- 75528

by:

2015 Chevrolet Traverse


I ordered the Draw-Tite Trailer Hitch for our 2015 Chevy Traverse and it fit perfectly, and I ordered the T-One vehicle wiring harness that also was very easy to install. Could not be happier with both of them. I also ordered the WeatherTech easy-on bug deflector that I'm also very happy with, it is a good solid deflector that will last for years. It is all top quality products for a reasonable price. Thank You e-trailer, very happy customer. Larry 562365



- 75528

by:

2014 Buick Enclave


One of my key concerns was that several vendors apparently ship these trailer hitches unwrapped and without a box. I was pleased to find that the hitch was nicely packaged with the parts nicely secured. I found the video very helpful, and I completed the installation in less than an hour. Using a ratchet strap to secure the mufflers made the job quite simple. I did have help holding up one side of the hitch while I started the bolts, but other than that it was largely a solo effort. My Enclave has only been through one winter, and the bolts threaded in after minimal cleaning the threads with a shot of WD40. The four rubber muffler hangers popped off without use of lubricant or a pry bar. Oh, by the way I took advantage of the low price guarantee. Etrailer provided the price difference plus 10% before the item even shipped. I almost felt guilty about getting a credit when I found a lower price from a lesser vendor. Etrailer has been extremely responsive, and I couldn't be happier with the whole experience. 202383


Comments

I went back and refreshed my memory last years review, and I am still satisfied today. The hitch looks the same as when I installed it a year ago.It was a great value and buying experience, and if I am in the market for trailer accessories, I will be back.I think that the etrailer business model of including customer comments and informative installation videos would translate well to other parts markets.

Dave - 06/18/2016

18837

- 75528

by:

2012 Buick Enclave


I ordered the hitch on a Sunday afternoon and 2 hours later i got an email that the hitch had been shipped. I received the hitch on that Tuesday and everything was perfect, Hitch fit perfectly and directions were very clear. 503590



- 75528

by:

2014 Chevrolet Traverse


Ordering from Etrailer was easy and with free shipping, can't go wrong. This trailer hitch was easily installed and works great. Installed in less than 15min on a 2014 Traverse. I do not know about other hitches, but what is nice about this one, is the hitch sits well up under the vehicle, so the same plastic hitch cover that came with the vehicle can still be used. I was somewhat expecting to have to purchase the alternate cover which has extension for the hitch receiver or leave the hitch visible. The wife was pleased, that the hitch was not visible. 141031


Comments

Keith, which hitch did you buy and what model Traverse do you have? Where does one buy the alternative cover?

-- comment by: Mike H - 02/02/2015

9213

Keith ordered the Draw-Tite Max-Frame hitch, part # 75528 from us for his 2014 Traverse. There are alternate covers from GM, but whether you'd need one would be dependent on year and which model. This hitch fits Traverse, Outlook, Enclave and Acadia.

-- Patrick B - 2/18/2015


- 75528

by:


Great product fast shipping 567805



- 75528

by:

2015 Chevrolet Traverse


I'll never get a hitch any place else. The hitch fit like it should the wiring harness plugged right in. The whole process took me maybe 30 minutes without a lift. The installation video was a big help thank you. If your car's been on the road for a few years in the North. Definitely use a small round brush and a penetrating oil on the bolt holes, like they suggest in the video, it'll save you a lot of hassle. 562081



- 75528

by:

2012 GMC Acadia


I received the hitch in the mail a few days ago, and I must first say that the packaging was very good. The hitch was well protected and boxed up nicely, with no loose parts anywhere. The instructions were fairly easy to follow and installation took about 1 hour. It could have taken less time if I had a lower profile torque wrench. The distance between the top of the muffler and the bolt was less than 2" and the height of my torque wrench and socket were more than that. So, in my case, it took me hanging on the muffler to make enough room to get the wrench in between to tighten the bolts to specification. As I said before, I didn't have the proper tool so I used what I had. For the 2012 GMC Acadia, the installation used 6 bolts, 6 cone washers, 2 spacers, and 2 handle nuts. The plastic bumper cover and the rubber muffler vibration mounts are the only things that need to be removed for the installation. Overall, it seems like a well-built trailer hitch. I look forward to many years of use! 70641



- 75528

by:

2012 Buick Enclave


No problem putting on the Hitch our 2012 Enclave. My wife did not want the hitch to show. Done some research and found that GM has a fisacia insert that takes the place of the one you remove. GM part # 25775358. A little pricey but worth it. 107818


Comments

Just got a 2014 Enclave. Thinking to buy the same hitch. Based on the video, it seems the orig. rear fascia door can be re-installed back. Why did you not put back the orig. one? Its not possible or you dont like the orig. fascia style? Or, only 20132014 enclave fascia door can be reinstalled? Thanks.

-- comment by: - 12/17/2013

2416
Comments

It is my understanding that the 2013

-- comment by: tom g - 12/17/2013

2418

Tom, I think part of your response got cut off. The Enclave received a bit of a facelift for the 2013 model year and the changes to rear bumper cover allow for the original cover to be re-installed over a hitch on 2013 and newer. 2012 and older models require a different panel to accommodate a hitch.

-- Patrick B - 12/19/2013

Comments

You are correct, or at least that was my understanding from Pecks Trailer Hlitch installation. I just know my fascia would not go back on, the hitch is very hard to see anyway Just my wifes car and she did not want the hitch to show.

-- comment by: tom g - 12/20/2013

2429
Comments

Thanks all for the comments. Spring is coming. Ordered and got the hitch installed on my 2014 Enclave. the orig. fascia door can be re-installed wo any problem.Happy!

-- comment by: snowshovel - 04/21/2014

3660

- 75528

by:

2011 Chevrolet Traverse


I ordered the hitch at 6pm on a Monday and it arrived at 2pm on a Thursday via standard UPS delivery. This installation was a snap. I set my laptop up in the back of our 2011 Traverse, watched the installation video and had it on in about 30 minutes. We also purchased the 118450 wiring harness. My wife and I had a great time installing it together; again in about 45 minutes. Thanks "etrailer" for getting me the correct parts (so quickly) and for producing the fantastic install videos! 54619



- 75528

by:

2016 Chevrolet Traverse


Great product. Easy to install and the install video was very helpful. Product has a nice finish and seems durable. Would buy from retailer again; great experience 467356



- 75528

by:

2016 GMC Acadia


The online purchasing process could not be any easier through etrailer. I also received emails from etrailer when the product was shipped and they even sent me an email once they were informed that the product had been delivered to my house. Pretty impressive. The packaging of the product was exactly what I would expect. Many reviews from others had mentioned suppliers that have shipped their product without any boxing material and the product showing up being damaged and parts missing. etrailer packages their products in a very durable packing box, the product is mobilized with additional packing material inside to prevent dings and damage, and all of the mounting hardware and instructions are sealed in a bag. Assembly could not be easier. eTrailer has created a great You Tube video at https://www.youtube.com/watch?v=mEqrluxIw5o which made installation a breeze after watching this. I had my 4 yr old daughter help me with the installation (She held up one side of the hitch while I started the bolts on the other side), I dropped the muffler for easier access to the vehicle’s frame mounting holes on one side, and I used the handle nuts that were provide by etrailer to install the bolts through the predrilled holes in my Acadia which made the rear bolt install quite easy. The hitch fit perfectly without any interference and the 2016 Acadia's cover also fits back on my vehicle to hide everything while the hitch is not in use. I timed the entire installation process and it only took me 16 minutes and 10 seconds. etrailer provided clearance measurements for the mounting of accessories which gave me confidence that my cargo carrier would fit. My cargo carrier fits into the hitch perfectly, there is ample clearance between my carrier and my vehicle, and there is enough clearance around the hitch to use a locking hitch pin. You really cannot beat the quality of this product, the easy of ordering from etrailer, the efficient and professional shipping process that etrailer has created, and the ease of installation for this product. 400626



- 75528

by:

Chevrolet Traverse


I put this hitch on in about 45 minutes single-handedly -- no, really, I am 7 weeks out from rotator cuff surgery and I found it easy to install using mostly my non-dominant arm. It's that easy! On the Traverse, it is truly a "hidden hitch" -- see pics. I used this hitch in conjunction with the Curt C56245 wiring harness and TrailerMate TM76470 mounting bracket. Each of those products work perfectly with this hitch. I would not change anything, this is a perfect setup. 206111



- 75528

by:


perfect fit, nice look and well made. 566465



- 75528

by:

2015 Chevrolet Traverse


Very satisfied with this product. They delivered it on time. 565337



- 75528

by:

2014 Chevrolet Traverse


Great package with the hitch, the wiring harness and the mounting tab for the wiring. Make sure that when you reach up in the rear passenger fender that you get the plug pushed in completely . I held the plugs together with my left hand and used a long thin pry bar with my right to reach up in and push it until it clicked into place. I will be buying all my stuff from etrailer.com going forward. 561619



- 75528

by:

2013 GMC Acadia


I have a 2013 GMC Acadia and wanted to add a hitch to haul my snowmobiles and add a bike rack. I ordered the hitch and wiring harness (product 118614) on a Sunday and the products arrived Thursday. My father and I were able to mount the hitch in 20 minutes and did not need to take the exhaust of the brackets, which saved us some time. As others have stated, the bumper fascia on a 2013 Acadia can be re-installed over the hitch without issue. The wiring harness was easy to install as well. Very pleased with etrailers service and installation videos, which aided in making the installation quick. Would definitely order from e-trailer again. 121245


Comments

Product has been great. It takes 15 seconds to remove the fascia off the back of my Acadia and install the hitch ballmount or a bike receiver. Ive used the hitch to trailer my snowmobile and four wheeler without issue. Ive also had no issue with the lights/wiring harness

Justin H - 03/19/2015

10131

- 75528

by:


Easy to install. Bolt hole were badly plugged up with rust and other stuff. Once holes were cleaned the install went very fast. Took about an hour. Very satisfied with the product 562685



- 75528

by:

2009 Buick Enclave


Ordered the hitch from etrailer Tuesday night, the day we picked up our 2009 Enclave, and it was dellivered on Friday(!), but I had to wait for a warm day to do the install. After the hitch was delivered, etailer sent me link to a review and resource page, with an installation video of the Englave. Watched the installation video, then watched it again to make sure I picked up on every detail. Installation went as smoothly as predicted, despite working on my back, with the rear end (of the Enclave) up on ramps. Took me about an hour, but then I hadn't installed a Hidden Hitch since our 1995 Olds 88. Product and service from etailer are great! 107548



- 75528

by:


Products are of good quality, fit well, and were easy to install. 564337



- 75528

by:

2012 Chevrolet Traverse


Service from eTrailer.com was exceptional - fast shipping and the product was perfect. The Draw-Tite Max Frame Hitch for the 2012 Traverse was a perfect to fit. Very sturdy. The video from trailer showing installation was easy to follow. Will definitely buy from them again. 560710



- 75528

by:

2009 Chevrolet Traverse


Hitch was quick and easy to install. Arrived quickly. 562915



- 75528

by:

2016 Buick Enclave


Really great hitch, great instructional video and documentation! Service was really stellar also! 561564



- 75528

by:


The products were received in perfect condition. Everything went well with the installation. etrailer seems like a great company and I will buy from them again. I have already been telling friends about them. 558965



- 75528

by:

2016 Buick Enclave


Love it! Works great, had it installed and you can't tell that it didn't come from the factory 427265


Comments

Still love this product. Just what I needed.

Marie M - 09/01/2018

43057

- 75528

by:

2014 GMC Acadia


Great product. Great price. I've had this hitch installed about a year now and it has done exactly what it is supposed to do, haul my motorcycle trailer and mount my bike rack. Installed it myself on my 2014 GMC Acadia in about an hour. Bolts have remained tight. Hitch tucks in nice and tight under the rear and hides nicely behind the removable cover that is part of the GMC bumper. I would buy from this vendor in the future. 424095


Comments

My hitch is still rock solid. I would buy this hitch again in a heart beat.

Chris E - 08/23/2018

42684

- 75528

by:

2017 Chevrolet Traverse


Great service, fast shipping 562581



- 75528

by:

2013 Buick Enclave


Great prices and I received the parts quickly without any problems. 560337



- 75528

by:

2010 Chevrolet Traverse


Perfect fit for my wife's Traverse. Took me all of 10 minutes to bolt on the car with no help. 558740



- 75528

by:

2013 Chevrolet Traverse


I am really pleased with the promptness that the hitch was delivered and in good shape with all parts. I would recommend you to anyone. 424383


Comments

So far so good. Working just like it should and no problems. Was easy to install.

Billy S - 08/25/2018

42797

- 75528

by:

2016 Chevrolet Traverse


The hitch was easy to install by myself. It fit perfectly. 426114


Comments

This hitch hasnt disappointed. I highly recommended.

Troy S - 08/28/2018

42924
100
1333
Show More Reviews

Ask the Experts about this Draw-Tite Trailer Hitch
Do you have a question about this Trailer Hitch?


  • Towing Capacity for 2016 Chevrolet Traverse without Factory Tow Package
  • When looking at weight capacities of a towing setup, you will always be limited by a system's weakest component. I took a look at the online owner's manual for your 2016 Chevrolet Traverse and saw that for a front-wheel drive model that does not have the factory trailer towing package, the maximum trailer weight is 2,000 pounds. As you mentioned in your question, the factory towing package would have bumped it up to 5,200 pounds. So with your Traverse that does not have the factory tow...
    view full answer...

  • What Size are the Mounting Bolts for Draw-Tite Hitch Part # 75528
  • I have added a link to the instructions below for you to review. There are 6 hex head, M12X1.75X45 CL10.9. The M12 bolts should be tightened to 92 Lb.-Ft. There are also 2 hex head 1/2inch-13 X 1-3/4 inch Gr.5 bolts. These should be tightened to 75 Lb.-Ft. If you need replacement hardware, I would suggest using part # RHK. Enter the brand and model of the hitch, and we can send you a complete hardware kit with all the bolts, washers, nuts etc. for that hitch.
    view full answer...

  • Towing Capacity of 2012 Chevy Traverse with Factory Tow Package
  • I took a look at the online owner's manual for your 2012 Chevy Traverse and found that models with the factory tow package can safely pull a trailer that weighs up to 5,200 pounds. With this in mind, you should have no trouble pulling a 4,200 pound trailer. You will just want to make sure that the fully loaded trailer (when it's ready for a trip) does not exceed this capacity. I am not sure if the 4,200 pound weight you provided is the trailer's dry/empty weight or its GVWR, which is the...
    view full answer...

  • Trailer Towing Setup Recommendation for 2014 Buick Enclave
  • You are on the right track! The Draw Tite hitch part # 75528 is a confirmed fit for your 2014 Buick Enclave as well as the trailer wiring kit # 118270. The wiring mount part # 18144 will also give you a place to mount the 4-way that bolts to the bumper. The ball mount part # C45036 that you referenced is would also work well if you need 2 inch drop. I attached a help article that details how to pick out a ball mount drop as well.
    view full answer...

  • Hitch Mounting Hardware Recommendation that Includes 6 bolts M12 x 1.75 x 45 CL10.9
  • We don't carry Uhaul hitches so we don't have a hardware kit specifically for the 78278 you have from them, but if you were to order the part # RHK and enter part # 75528 and Draw Tite as the manufacturer you would receive mounting hardware that would include 6 hex head, M12X1.75X45 CL10.9 with washers, nuts, and blocks.
    view full answer...

  • Parts Needed To Add A 7-Way To The Chevy Traverse
  • Yes, I will be happy to help add a tow package to your 2012 Chevrolet Traverse. First, you will need 4-way Flat Trailer Connector # 118450. The purpose of this item is to control and allow the basic hookup of the three lighting functions (running, turn, and brake lights) plus one pin is provided for a ground wire. Most standard light duty trailers will use a 4-pole flat connector. This custom-fit T-One connector plugs into your Chevrolet Traverse's wiring harness, which is located behind...
    view full answer...

  • Recommended Trailer Hitch Receiver for 2017 GMC Acadia Limited
  • Trailer Hitch Receivers are a custom fit for each vehicle, sometimes a certain series of a make/model are a different fit. This is the case with the with your 2017 GMC Acadia Limited. The frame on your specific vehicle requires a different mount style than that of the Draw-Tite # 76023 you referenced. The hitch receiver I recommend for your vehicle is the Draw-Tite Max-Frame Trailer Hitch Receiver Class III - 2", # 75528. This is an easy bolt on installation. The complete hardware...
    view full answer...

  • Trailer Wiring Needed for 2017 Chevy Traverse with Rear Air Conditioning Unit
  • Since your 2017 Chevrolet Traverse does not have the factory connector but does have a rear air conditioning unit I recommend first checking to see if you have the factory tow package. You can locate the plug for the Tekonsha T-One # 118270 at the rear passenger side as is shown in the attached installation video. If you don't have the factory tow package then you will want to go with the Hopkins # HM11141150. I spoke with my contact at Hopkins who said that he hasn't heard of having...
    view full answer...

  • Replacement Handle Nut for Hidden Hitch Trailer Hitch # 75528
  • You can use handle nut # 1332, quantity of 1, to replace a handle nut for trailer hitch # 75528. Or you can get replacement hardware kit # RHK which will replace all the hardware for the hitch. Just enter the hitch number and choose the manufacturer where indicated on the page and our team of hardware ninjas will compile the proper kit.
    view full answer...

  • 7-Way Trailer Wiring Parts and Instructions for a 2012 Buick Enclave
  • The first thing you will need to do to install a complete 7-Way trailer wiring harness on a 2012 Buick Enclave without factory tow package wiring, is install a 4-Way trailer wiring harness, part # 118450, if the vehicle does not already have a working 4-Way connector. Next, you will need to install an electric brake controller installation kit, # ETBC7, to complete the wiring. Installing this kit will require you to hard wire the 12 volt power wire, brake controller output, power, ground...
    view full answer...

  • Recommended Towing Components for 2015 to 2017 Chevy Traverse
  • The 2015 through 2017 Chevy Traverse models have a towing capacity of 2,000 lbs with the V6 3.6L. If you were to purchase the models with the factory tow package (all except the LS base model), the capacity increases to 5200 lbs according to the manufacturer. The tow package includes the trailer hitch and a heavy-duty cooling system. If you already have the non-tow package model, the manufacturer rating won't change because they didn't install the parts. Adding a hitch like the Draw-Tite...
    view full answer...

  • Wiring Harness for a 2014 GMC Acadia without a Factory Towing Package
  • The Draw-Tite # 75528 that we currently offer for your 2014 GMC Acadia, and the one you referenced will utilize custom fit wiring # 118270 because a tow package is not present. The custom fit T-connector will plug directly into your Acadia's wiring harness located behind the driver's side and passenger side tail lights. I included a link with the instructions for you. Take a look at the articles I included for you.
    view full answer...


Do you have a question about this Trailer Hitch?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality trailer hitch for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hitch information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Test Fit:
Joe V
Expert Research:
Jackie C
Expert Research:
Michael L
Video Edited:
Zack K
Video Edited:
Andrew K
Written by:
Lindsey S
Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Jameson C
Video Edited:
Joshua S
Test Fit:
Nicholas E
Video Edited:
Jacob T
Test Fit:
Rick A
Updated by:
Adele M
Video by:
Andrew L
Expert Research:
Adam R
Video Edited:
Kathleen M
Updated by:
Laura H
Video Edited:
Dustin K
Test Fit:
Shane T
Expert Research:
Rachael H
Video by:
Alan C
Test Fit:
Randy B
Video Edited:
Chris R
Expert Research:
Victoria B
Updated by:
Amanda M
Test Fit:
Brent H
Test Fit:
Shane H

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.




^
About Us
photos and videos
1,056,204

Original Photos & Videos

Produced to make sure you know what you are getting and you get exactly what you need.

installations
35,570

Installations Completed

To make sure products work and fit the way they are supposed to.

etrailer call center
2,476,511

Phone Calls & Emails Answered

1,125,924 phone calls and 1,350,587 emails to help find the right solution.

etrailer training
400+

Average Hours of Product Training

We get to know our products firsthand so experts can better help you.

etrailer service
71

Years of Quality Customer Service

Assisting our neighbors and customers, face to face at the counter.

etrailer experts
193,357

Pages of Expert Information

Created to make sure you have all the answers to your questions, from real experts.