Hitch Mounting Hardware Recommendation that Includes 6 bolts M12 x 1.75 x 45 CL10.9

Question

Question:

The uhaul part number 78278 requires 6 bolts M12 x 1.75 x 45 CL10.9 with washers, nuts and blocks. Are these included in the kit.

asked by: Anthony H

0

Expert Reply:

We don't carry Uhaul hitches so we don't have a hardware kit specifically for the 78278 you have from them, but if you were to order the part # RHK and enter part # 75528 and Draw Tite as the manufacturer you would receive mounting hardware that would include 6 hex head, M12X1.75X45 CL10.9 with washers, nuts, and blocks.

expert reply by: Jameson C

0

Answer 1

That's a great question Richard and thanks for the kind words! It's an error that I'll get someone to check on. Our etrailer Hitch item #e98902 is going to have the same installation process and difficulty as the Curt item #C13315.…

view full answer...

Answer 2

The Draw Tite Hitch part #75751 that you referenced has been confirmed to fit your 2009 Mercury Mariner. In order to order replacement hardware for it you will need part #RHK. Once on the product page you will need to select Draw Tite as the…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 6

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 7

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 8

Hey Adrian! The higher capacity for the B&W #BW47BR and Curt #C77MJ comes from the construction. The B&W hitch weighs 45 lbs and then the Curt and Trailer Mate #TMT54FR both weigh 32 lbs. The Trailer Mate does sit just a tad higher compared…

view full answer...

Answer 9

Hi Stephanie! Great question and you’re totally right to ask, because most hitches for the 2024 RAV4 do require a bit of bumper trimming. That includes the Oris Detachable Hitch #TS66VR, since it uses a hidden design that needs a hole cut in the…

view full answer...

Answer 10

Both the Curt #C13382 and the etrailer #e98912 hitch are a 2" Class III hitch receiver that will provide a maximum gross trailer weight of 3,500 lbs and a maximum tongue weight of 525 lbs. You are correct, they are an identical hitch but our…

view full answer...

Answer 11

Hello Charles, Great question. The only difference between the etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" #e25TR, and the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #C67JR is the…

view full answer...

Answer 12

Hey Brock congrats on the new vehicle! To tow a small trailer with your 2025 Mazda CX-5 you're going to need a hitch, a wiring harness, a couple of mounting brackets, and a ball mount kit. The best hitch for your CX-5 is going to be the etrailer…

view full answer...

Hitch Mounting Hardware Recommendation that Includes 6 bolts M12 x 1.75 x 45 CL10.9

Product Page this Question was Asked From

Continue Researching