bing tracking image
  1. Trailer Bearings Races Seals Caps
  2. etrailer
  3. Bearings
  4. Standard Bearings
  5. 8000 lbs Axle
  6. 1.250 Inch I.D.
Replacement Trailer Hub Bearing - 02475
etrailer

Replacement Trailer Hub Bearing - 02475

Part Number: 02475
In Stock
$18.85
Retail:$20.61
You Save: 9%
Trailer Bearings Races Seals Caps
Add to cart
etrailer Trailer Bearings Races Seals Caps - 02475
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
High-quality, tapered roller bearing is designed for high-speed use. Replacement part uses industry-standard number. Great Prices for the best trailer bearings races seals caps from etrailer. Replacement Trailer Hub Bearing - 02475 part number 02475 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (103)
  • Q & A (0)
  • Videos (2)
  • Photos

etrailer Trailer Bearings Races Seals Caps - 02475

  • Bearings
  • Standard Bearings
  • 8000 lbs Axle
  • 1.250 Inch I.D.
  • Bearing 02475
  • etrailer
  • Race 02420

High-quality, tapered roller bearing is designed for high-speed use. Replacement part uses industry-standard number.


Features:

  • Inner diameter: 1.250"
  • Matching race (sold separately): 02420
  • Application: outer bearing for 8-231-8, 8-218-9 and 8-187-7 hubs


02475 Replacement Bearing





Video of Replacement Trailer Hub Bearing - 02475

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Trailer Bearings Races Seals and Caps Rebuild

Speaker 1: Today we're going to take you through the rebuild process on a couple of hubs. We've got an idler hub, and here we've got a hub and drum assembly. Works with electric rigs, but this can also work for just standard discs, if you've got a disc brake style setup.Basically what we're going to show you is how to get all of the bearings out. How to remove the seal. How to remove the race's if they're damaged, then get them replaced in the proper manner. We'll show you how to use an easy loop hub, which we have here.The first thing we are going to need to do is, get the grease cap off the end.

It can have either a rubber plug in it like this one does, or it can be a solid metal cap.These are pressed fit in there, basically by tapping on them on the back side. To remove them, a deadbolt hammer is typically what we're going to use. We're just going to start tapping as we go around. You'll see a little separation start right here, and slowly it'll work it's way off.Now the next step's going to vary a little bit depending on your axle setup. Do you see this is going to have a keeper that goes around the nut.

And that prevents that from being backed off, or removed. A lot of times you'll have a castle nut, which will have just little tabs that stick off, and there will be a cotter pin that passes through it. Just depending on your application, you need to get the keeper for the nut off. This style we just kind of pry out. A cotter pin you would just remove of course.Once we have that off ...

We'll start to take off the nut here, and the washer that's in behind it. Now yours should look a whole lot more dirty than this. There should be a lot of grease packed in, and through the hub, this one's brand new. We thought it'd be nice to show you the components before the grease was on .. Of our washer that comes off.And then here we're going to have our outer bearing.

Continue to pull that. We're gonig to have our inner bearing here. That sits in the backside of the hub. And we didn't put it in yet, we will show you how to put it in. But a seal would typically be covering the backside here. We'll show you how to use a seal removal tool, or another tool. To get that pried up and out. To get an access to that inner bearing.Now for a drum style like this, that process for disassembly is going to be just the same. One thing to keep in mind if you're using a disc brake setup. You'll have to remove the caliper before the disc is going to come off.Now once we have the spindle exposed, as we said this is going to be really greasy. We want to get all the grease removed, and the first thing we'll do is inspect it. We want to make sure that it looks just like what we have here. Everything's nice and smooth. We don't see any kind of discoloration, or any marring on the metal. Indicating that our bearing's got hot.If you do have any of those symptoms, at this point it's time to replace those bearings. You don't want to repack them. Get new bearings, and put in there. You might have a bearing that's come apart in here. Another surface to ensure is in good condition, is where your seal is going to go. That helps seal all the grease inside of our hub. With a damaged or broken seal, that grease is going to seep out. Either out of the hub, or in this case into our brake assembly.Now if your axle has brakes, we're also going to check the disc. Make sure it doesn't have any issues, or your hub. And this is going to be a hub and drum assembly. The brakes are going to ride on this machine surface. You're going to check that for signs of excessive heat, discoloration, or cracking. And this is our magnet surface. We'll check that surface for the same issues.Now inside the hub regardless if it's a disc brake, it's a drum brake like this. Or just a standard idler style hub. You're going to have an outer race. Would be right here, it's a small tapered piece of metal your bearing sits in, and rotates on. That's basically the outer portion of the bearing.You have the same thing here on the backside. This is called the inner race. Now if those show any signs of wear, overheating, or cracking. Those are also something we'll need to replace, which we'll show you how to do in just a minute.Now, with your brake assembly exposed, if you do have electric brakes like we have here. It's a good idea to check all the components for wear, cracking, maybe missing pieces. Check your pad thickness to make sure those are in good shape. Basically if you have a non working brake assembly and you put everything back together, you're just going to have to take it apart and do it all over again to get back to the brake assembly. This gives you a really good option to be able to change them out.And most applications are going to use a four, or maybe a five bolt flange to hold them in place. And you'll just remove the lock nuts, or sometimes you'll have a hex nut with a lock washer. You want to remove those, and then simply slide your assembly off after you cut the wiring.The friction material itself should also be checked for any kinds of cracking, or overheating. If you have any grease inside the system at all, it's likely it's gotten on those pads. It's a good idea to get those changed. Now as far as the removal of the races go, it's going to be just the same whether we're using an idler style hub like we have here. A drum brake like we have here. You can basically see where the idler is, here in the middle of the hub. It's going to go all the way around there, and we just have this extra material here to provide our braking surface.Now if you're doing a disc brake style job again, it's going to be just the same here with the races living inside of the actual hub portion. You'll just have the discs there for the brakes to make contact. We're going to use this little bit smaller one, it's a little bit easier to manage to show you how to get these out. We've talked about where the races are. The outer here, the inner being closer to the inside, but on the backside of the race there's a little lip. That lip's meant to stick out just a little bit further than the hub, and provide us an area to put our tool on, and help to drive that out.If you look all the way through there on that inner race, you'll see that little lip that sticks out just from the hub slightly, and it gives us enough area to use our tool on. Now generally to remove these you're going to use a punch, similar to this. Some guys will use a screwdriver. Or a piece of pipe. If you have a piece of pipe that's small enough to fit inside of that diameter, you can take that down through and allow it to rest on that lip.Use our punch, and then just need a hammer. And we'll start working that out. We're going to tap all the way around. Kind of equally, and evenly apply the force to get it to come on out of the bottom for us.You can see now as it starts to come out there's going to be a little gap created between the hub and the race. And we can just keep going, bringing it on out. Then you can inspect the inside of the hub surface there. Make sure no damage or anything has occurred, and repeat that same process for the outer race if you plan on removing and replacing that one.Now in the outer flat edge, you can see we're going to have our tapered edge on this side. If we roll our race over to the flat side, typically there's going to be a manufacturers part number on there. That will help you identify which race it is, that you need to go back in your system. If those are rubbed off, worn off, if you can't read them. You can measure the outside, to outside diameter of the race here. It's a good idea to use a micrometer to get it exact.Now here's your basic micrometer. And again, the outside of the race is what we're going to need to measure. You want to go . I set the thickest point there. Looks like this one's going to be about 1.98. That's going to be the measurement you'll want to supply.Now while we've got this out, let's also look at the proper way to measure our bearing. Instead of the outside for the bearing, we need to measure the inside diameter. That's going to be pretty simple. Let's pull that out, find the largest measurement we can. Which here, looks like it's going to be 1.03. With that information, we'll be able to get the correct bearing, and the correct race, so they'll fit together properly and make a full bearing kit for us.Now here's the race, we're going to show you how to get this put back in. Basically just going to press fit inside of our hubs. We need to get it down on there. Kind of like that. And you'll have a couple options. A lot of times you're going to see do it yourself or at homer, just going to use a wooden block. Just place it on there. That's going to get you started, but at that point you'll struggle in getting it to go all the way down into it's seat.Now to take care of that problem, there are several seal drivers that are available. Seal and race drivers that are available out there on the market. It's designed to fit down inside of our race, inside of our hub and get it down there where it needs to go. This is part number ptw83020, has several different sizes, even if you have multiple trailers it's going to do the job.Now the side with the angle on it, is designed to fit down inside of our race. If we use the other side, that's going to be for driving your seal into place. Just want to hold it, and take it on in with your hammer. You'll see, you just want to insure that our race is all the way up against that line on the hub where it's supposed to mate to.Now when it comes time to pack your bearings you're going to have several different ways of doing this. You can just use your hand, is the traditional method. That's going to be the method probably reserved for the very occasional trailer work kind of situation. If you do it once or twice a year, probably get away with it that way.Next you would go to a, kind of a sandwich funnel style almost. If you look inside of there, you can see the bearing. It's located between the two pieces. Just use a grease gun. Start filling that with grease, and that's going to fill our bearing for us. And the third, with this one you're just going to place your bearing down and in. It should be pretty close to center. And then we've got our cone her that's going to go down and secure that.Now I think this style, wastes a little bit more grease than what this style will. This has a dust cap. You can see, you can keep your grease in there, put your dust cap on there and save it for later use. This will be if your going to do it every couple years. And this particular style would be if you're a more regular user.Let's start by showing you how to use a bearing packer. Similar to this. Again, we've just got our grease inaudible 00:11:07 here on the top. And then just slowly start to fill it. Now I like this style quite a bit. I think even regular users might enjoy it, because you can get a really quick visual look at that bearing. You're not going to have to overdo it, or have to much grease.You can kind of see in there now, we're starting to get grease to come out of it. Couple more pumps, we'll be good. You can see we've got grease coming out all the way around. Where all of our bearings are. Got a little bit of excess there. Just take that around the outside of it. And then we should be able to lift it off. And now you can see what we we're talking about. Just a little bit of excess there, that you're just going to wind up wasting.Now we'll take our bearing, we're going to place it right down in our race. And then we'll cap off the back with our seal. Right now our seal's going to fit in just like our race did. It's going to have a little bit of a pressure fit to it. Now very often in this situation, I see people using the four by four method. Kind of here, just placing that on and tapping it. As an option though, if you do have one of these. You can see that's designed to fit right on the top of the seal. And help drive it in.The biggest thing here is, just going to be getting it driven in squarely. You can see, this side's in a little bit further than this side. I'm going to start this side first. Now since we didn't have the opportunity to show you before, we're going to take a look at pulling a seal. Now this is a seal puller, we carry this on our website part number ptw1219. This is meant to hook underneath the seal. And then you kind of pull up on it, and just like our race you'll have to work all the way around that edge. Just bringing it out a little at a time.If you don't have that available. Another option would be a screwdriver. You just kind of get that under the seal, and turn it. And see, that'll allow you to also pop that out. We've taken care of our race. Our inner bearing. Our seal. The last component, before we put our hub back in place is going to be our outer bearing. Now with this bearing, I'll show you the hand packing method.This is definitely . Slightly dirtier method than the bearing packer. When we get grease on our hand we want to look at the larger side of the bearing. This is the smaller side. We have a larger side In between the inside and outside there's a gap. We can see our rollers in there. We want to grab that, and use that gap and shove grease inside of it. Now this is going to take a little bit, you want to work in the same spot until you get the grease pushed all the way through. We can see on the top there we've got a little bit starting to come through.And once we push it in the bottom, and you see it start coming out the of the top in those little drips, it's going to indicate that, that section's fully packed. Just need to work all the way around their outside edge now and do the same thing. Alright, once that's all the way around . The bearing will be ready for use.Now one more thing I like to do. We can see our inner bearing there, and our outer bearing. Well between the two, got a pretty big gap in there. If you'll take a . Pretty good amount of grease. We're just going to go all the way around. See how we can go all the way around the inside and just line that really well. The more grease we have in here, the less chance we have of any moisture getting in there, which can cause corrosion, rust, pitting. Pretty much things we do not like when it comes to bearings, races, and hubs.Put plenty of grease in there. And then this one does have the easy lube spindle, that'll even fill it in more. Now we can get our assembly slid on. I like to keep my thumbs on that outer bearing, just to prevent it from . inaudible 00:15:28 pushed off there. Now we can put on the original hardware that we removed, in taking off our hub the first time. In our case, we had our washer and our nut.Now most commonly you'll see pliers similar to this being used. We basically want to get that tightened down. Once it's fully tightened down you'll feel some resistance in the hub. We back it off just slightly. That'll give us a little bit more freedom of motion there. Something you don't want however . Is any movement in, or out on your hub. You want to be sure that everything is compressed, and you don't have what's called end play. Which would be the play in and out.Once we've got that set, then you'll put on whatever tight keeper yours came with. Get that put back in place. Now with an easy lube style hub, you're going to place your grease gun on the end, and then you can just fill the remainder of that hub up.Now for your typical applications, you're either going to have a solid cap, or a cap that'll have a rubber plug in it. A solid cap's going to be for an axle without the grease inaudible 00:16:51 here on the end. Goes on there. Just knock it on with your rubber mallet. Same with the one with the plug. Just gives you a removable area there, be able to cap that off.We'll show you how to put that on. Now as alternatives as well, a lot of times on boat trailers and marine kind of situations. You'll see a bearing buddy. This is going to apply a little bit of pressure on the grease, you'll fill it up. This kind of comes out just a little bit. That applies constant pressure on the grease to make sure we don't have any air, or anything like that. Then there is also an oil bath hub available. Now this is going to be for use with seals that are going to be designed specifically for oil bath use. You'll have to change that seal.We're using a double lip seal. There are also single lip seals available. Of course a double lip seal is going to give you just a little additional security. Keep that in mind when you order. But let's get this knocked on there now so you can see how that works. We just want to take the cap, we're going to center it. This is going to be very similar to what we did with the seal. And then just gently start tapping it around the outside. And it'll seep down on there for you.It's really going to be the same thing that you'll do with any of the end caps. Now with this side done, it's a good idea to take care of all the other hubs. Get them all on the same maintenance schedule. And as long as you'll periodically check the grease, take your trailer out for a trip occasionally. Just to keep everything lubricated. It should extend the life of these parts, and give us years of good service.

Customer Satisfaction Score:


Customer Reviews

Replacement Trailer Hub Bearing - 02475 - 02475

Average Customer Rating:  4.4 out of 5 stars   (103 Customer Reviews)

High-quality, tapered roller bearing is designed for high-speed use. Replacement part uses industry-standard number.

by:

Disc brake kit fit perfectly.... no issues whatsoever. Customer service was invaluable in getting me the correct parts



by:

I received the bearings earlier than expected. Which was great. However 1 of bearing cages was slightly dented. I was able to straighten it though. But it should have been packaged better.



by:

I had to call back to get the plastic end caps even though they were listed as included in the kit.



by:

All four rotors are damaged two different deliveries unacceptable they are gouged they are supposed to be smooth for the brake pads if we put the brake pads on here they will turn in brake pads up very fast

Etrailer Expert

Jenny N.

10/28/2022

Thank you for sharing and for sending pictures. This provides the opportunity to share with our shipping department so that improvements can be made. Customer Service will be in touch to assist you



by:

The product and installation was fine.
works
great

Ronald

10/20/2023

The brakes are great.Finally brekes that will stop me.



by:

I was happy with the purchase of your bearings,until I opened the box. Upon opening, I found that the bearing races were not included. After talking with another rep on Saturday, she informed me that the bearing races sold separately. Now I had to reorder to get the bearing races,and am broke down for another week. I think good customer service would dictate that you inform me that the races sell separately. I guess it’s my fault, for assuming the races would come with the bearings, since there was no mention of them selling separately.I am not pleased with this,and will most likely look elsewhere for my next trailer parts!

Etrailer Expert

Jenny N.

4/16/2023

We do mention on the product page that the matching race, part # 02420, is sold separately and we have it also in related parts.



by:

PERFECT FIT



by:

Only received 2 out of the 4 that were ordered.



by:

I had been looking for wheel bearings and brake hubs for my RV and was not having luck finding them till I contacted Mathew etrailer. He was very helpful and took the time to get the right parts I needed for my rig. When the parts arrived they were exact replacements. The install went well because they were original equipment.
Thanks



by:

Installation was without issue and they are working like a champ!



by:

I put disc brakes on my 38 foot 5th wheel travel trailer due to the poor brake quality of the manufacturer. I now drive on the highway with much greater confidence for our safety. The stopping power of these brakes is incredible. The quality of the brakes are superior. I installed them myself finding the instructions accurate and easy to follow. There was a small part missing out of the brake line kit and the part was overnited to me by E Trailer. I have purchased many items from this company and have found the products to be of top quality and fairly priced. The customer service is outstanding. Thank you.



by:

Worked Great with the the HydraStar Electric Over Hydraulic Actuator for Disc Brakes - 1,600 psi just make sure you find out if you need the HydraStar Electric Over Hydraulic Actuator Adapter Module for Ford and Chevy Brake Controllers - HBA-CAM



by:

Bearings have held up just as well as the more expensive "standard" bearings. We are running a trailer at capacity, or well over capacity, for 20K miles per year and have had no more issues with these Chicom bearings as we have with the Timken equivalent.



by:

Products received are exactly as what they said they would be and what I expected. However, the ordering process is not user-friendly on line. When purchasing an item, it would be nice to have recommended items that go along with that item. For example, for a rotor, it would be nice to have the bearings and brake pads that go with it listed. Trying to get a hold of an associate is like watching paint dry. When leave a message, it takes 2 days to hear back. The shipping choices are not clear (business vs. calendar days) and not accurate. I paid for 2 day shipping because I was in a hurry and would be on the road. The product showed up in 5 days causing me costly travel changes. No email confirmation was provided after the order was placed until requested. In addition, no shipping tracking number was provided. I had to request it to find out my shipment was going to be late. Products are good, but service and shipping and website is disappointing and needs a lot of work.



by:

The bearing just arrived as usual with etrailer service was fast and prices fair. I haven't installed these but have purchased this item before. I use them in a large trailer , heavily loaded and often pulled 16 hrs stopping only for fuel. I and my wife switch off.
I service my own wheels and I change bearings if there is any visible change in them. These bearings last several years. I'm satisfied.



by:

The product seems to be fine, althought with bearings you cannot really tell until they have been used for a while.

I did not rate this higher because of the very poor packaging job etrailer did. I ordered 8 bearings and four seals. Instead of being individually wrapped they were placed in a plastic bag together where they were free to rub against each other. That is not the correct way to ship an item like a bearing that can be easily scored or bent.



by:

Damage due to no packing, thrown in box loose with races loose along with seals. Bearing cages were damaged due to beating during shipping. Constant problem with poor packing on order items

Etrailer Expert

Jenny N.

3/9/2022

I will have our Customer Service team reach out to you.



by:

Came as planned



by:

This total break overhaul was actually fun to do because i got everything from etrailer and I knew it was a perfect fit! One year and thousands of miles later I still love it. If your on the fence, take the plunge, you WILL be happy..

Trailer a 25ft 6500 lb boat up an down the East coast in salt water.



by:

Great bearings, great price. Installed these in two of my 6 hubs. So far, after 5,000 miles, I'm not seeing any difference between these and the Timken bearings I have in the other hubs.



by:

Bought the complete replacement bearing set for my Fifth Wheel camper and as always very pleased with the price and fast shipping. Hard to beat the price, just keep coming back, good people to deal with..



by:

Bearings were received in a timely way, installed and have1500 miles on them with no problems. I use etrailer for all my trailer needs and have always gotten good product and good service.



by:

Need to ship in better packaging. Boxes came in with holes. Parts were missing.
Replacement parts were sent out but the job is now delayed waiting on the parts.



by:

China Bearings but what else is new. Great company service and prices are comparable. Would like to have had more questions asked about stud size on the rotors I bought. Cost me $200.00 for my mistake. Rotors had 1/2in studs and I needed 9/16in studs. My bad.



by:

Just starting my new business I knew I would have to do things myself to save money. Etrailer Made it simple with one phone call. Lori was knowledgeable and easy to talk to and I saved hundreds ordering from them. My local trailer sales and service was triple the price.

Thanks etrailer.


25
103
Show More Reviews

See what our Experts say about this etrailer Trailer Bearings Races Seals Caps

  • Adding DeeMaxx Hydraulic Brake To A 2024 Brinkley Z2900 5th Wheel
    Hello Darren. Thanks for reaching out, I can definitely help with this. To convert your 2024 Brinkley Z2900 5th wheel over to disc brakes, you will need a disc brake kit, a brake line kit, and electric over hydraulic actuator, and a breakaway kit for the trailer. Your tow vehicle will also need to be equipped with an electric trailer brake controller. If you want to go with DeeMaxx brakes, such as the DeeMaxx Disc Brake Kit # DE68YR, this is definitely a good choice. Keep in mind this...
    view full answer...
  • Recommended Disc Brake Conversion Parts for a 5th Wheel Trailer w/ 8,000 lbs Axles
    I would be happy to. Since your 2019 Heartland RV Landmark has 8,000 lbs axles you will need the Kodiak Disc Brake Kit item # K2HR89DD. These will replace the hubs and drums you have with rotors and hubs. The mounting brackets will attach to the flanges you already have. These are dacromet-plated rotors that have a 8 on 6-1/2 bolt pattern. You will need one set per axle. For an actuator, brake lines, and a breakaway kit you will want the Hydrastar Electric Over Hydraulic Actuator Kit...
    view full answer...
  • Replacement Axle Components For Dexter D80 8,000LB Axle Under 2016 Landmark Orlando 5TH Wheel
    Thank you for the image of the axle tag for your Dexter D80 8,000LB axle. This will require the 10-36 Grease Seals # RG06-070 you found. Here is a list of the other components your axle uses should you want to replace or find any parts worn. Inner Bearing # 25580 Inner Race # 25520 Outer Bearing # 02475 Outer Race # 02420 Left Hand Brake Assembly # 23-434 Left Hand Brake Shoes # BP04-245 Right Hand Brake Assembly # 23-435 Right Hand Brake Shoes # BP04-255 Brake Spring Kit # K71-506-00 Hub/Drum...
    view full answer...
    Image 1 for
  • Disc Brake Conversion Kit For a Tandem Axle Trailer With Dexter 7,000LB Torsion Axles
    Here is a list of all the parts you will need as we do not have a kit that contains everything you will need in one for converting your trailer to disc brakes. Kodiak Disc Brake Kit # K2HRCM1337-9DAC Qty 2 Inner Bearing # 25580 Qty 4 Outer Bearing # 02475 Qty 4 Grease Seals # RG06-090 Qty 2 Kodiak Synthetic Bearing Oil # XLPROLUBE Qty 4 Dexter 9/16" Trailer Wheel Lug Nut # STN569 Qty 32 Depending on your current brakes you will need some additional parts. If you currently have electric...
    view full answer...
  • Replacement Bearings and Seals for Curt 5.2K to 8K Axle
    Thanks for the axle information, Mike! Here are the correct parts according to my contact at Curt: - Bearing # 02475 and Race # 02420 - Bearing # 25580 and Race # 25520 - Grease Seals # RG06-070
    view full answer...
  • Disc Brake Kit for Trailer with 8k Lippert Axles
    For a Lippert 8k axle we have the Kodiak Disc Brake kit part # K2HR89DD as a confirmed fit which comes with everything needed for a single 8k axle. You'll also need bearings # 25580, # 02475, and grease seal # RG06-070. Then for an actuator kit that includes the quickest reacting and most reliable actuator as well as the needed brake lines and a breakaway kit you'd need the part # HBA16-252-82.
    view full answer...
  • Replacement Bearings and Seal Recommendation for Kodiak Disc Brake Rotor/Hub on Keystone Montana
    If you have the Kodiak disc brake rotor/hub part # KHR1389D that you referenced the bearings you need are part # 25580 and # 02475 and then the grease seal is the part # RG06-070. If your trailer has 7k axles installed on it these part numbers would be what you'd need.
    view full answer...
  • Comparing Dexter Hub and Drum Assemblies 8-285-11 and 8-393-4UC3
    You will experience some reduced braking power when using the Dexter Trailer Hub and Drum Assembly # 8-393-4UC3 with 12-1/4 x 2-1/2" brake assemblies compared to the # 8-285-11 with 12-1/4" x 3-3/8" brake assemblies. Between the two I recommend going with the # 8-285-11 along with bearings # 25580 and # 02475, grease seals # RG06-070, lug nuts # 6-53, and grease caps # rg04-120. For brakes I recommend the self adjusting braking assemblies # 23-434-435. Since you mentioned your axle does...
    view full answer...
  • Replacement Electric Trailer Brakes For A Hayes 8K 4 Bolt Axle
    Yes, The Dexter Electric Trailer Brake Kit - Self-Adjusting - 12 inch - Left Hand and Right Hand - 8K # K23-532-533-00 will work with your Hayes 8k 4 bolt axle. When it comes to getting the correct hub and drums you will have to first find out what your Inner and Outer Bearing numbers are on your current hub. The bearings should have an etched or stamped number on it. If you can not find the stamp you can measure the inner diameter of the bearings using The Digital Caliper # PTW80157....
    view full answer...
    Image 1 for Image 2 for
  • Kodiak Disc Brake Kit for 2018 Jayco 377RLBH 5th Wheel
    I would be happy to help you set up your 2018 Jayco 377RLBH 5th wheel for disc brakes. We don't have a complete kit available with all the lines and bearings you will need but I can give you all of the part numbers. The Kodiak Disc Brake Kit - 13" item # K2HR79 you were looking at is a great set of disc brakes that will be perfect for your Dexter 7k axles. Depending on the region of the country you are in and how much traveling you do on salty roads I recommend spending a little extra on...
    view full answer...
  • Replacement Hub and Drums For PJT Trailer With 008-393-03 Installed
    Thanks for all of the information on your PJT Trailer! Based on your drum part number you have a 12-1/4" Drum that is oil bath. The Dexter # 8-393-4UC3 is almost right, but it is designed for grease and not oil. You will need the # 8-393-4UC3 and oil seal # 10-63 for each hub. This hub does not include the bearings so you will also need new inner bearing # 25580 and outer bearing # 02475 for each hub. If you need replacement brakes now or in the future you will need # 23-428-429 for...
    view full answer...
  • 8,000 lb Electric Trailer Brake Assemblies That Measure 12-1/4 Inch x 3-3/8 Inch
    I saw the Q&A you were referring to, which is about a decade old as of this writing and there are no 12" diameter x 3-3/8" wide brake assemblies we offer, just the 12-1/4" diameter x 3-3/8" wide # AKEBRK-8 that are rated for 8,000 lb axles. You may need to change your hub and drum to get one compatible with the larger brakes that are now available. To do this you will need to know what bearings your current hub has. You will need to take apart your current hub assembly and look at the...
    view full answer...
    Image 1 for
  • Disc Brake Conversion Kit for 2019 Keystone Montana 5th Wheel
    I can get the parts from that video but what I don't know 100% is the bolt size on that brake kit. Based on our own installation video I believe it is the 1/2". It is also worth noting that the brakes are designed for 7k axles with # 25580 inner and # 14125A or # 02475 outer bearings. For the brake kit it is one of the following: -DeeMaxx Disc Brake Kit - 13" Hub/Rotor - 8 on 6-1/2 - Maxx Coating - 1/2" Bolts - 7K # DE53YR -DeeMaxx Disc Brake Kit - 13" Hub/Rotor - 8 on 6-1/2 - Maxx Coating...
    view full answer...
  • What Bearings Does Kodiak 13 inch Hub/Rotors Use
    Kodiak 13 inch hub and rotors like the part # KHR13858D use bearings # 25580 and # 02475.
    view full answer...
  • Recommended Hydraulic Disc Brakes for Dexter 7,000 Pound Axles
    For the 7,000 pound Dexter axles on your 5th Wheel Camper, I recommend the Kodiak Disc Brake Kit # K2HR79E. This kit is designed for 7,000 pound axles, 16 inch and larger wheels and features an 8 on 6-1/2 inch bolt pattern. The kit includes 2 full brake assemblies (rotor-and-hub assemblies, cast iron calipers, caliper-mounting brackets and caliper-mounting bolts). You will just need to add the compatible bearings with # 25580 and # 02475 and for the grease seal # RG06-070. Then for a...
    view full answer...
  • Dexter Equivalent Replacement for Lippert 148627 Hub/Drum
    The comparable Dexter product would be part # 8-285-11, which is an 8K 12-1/4 x 3-3/8 hub/drum with a 8 on 6-1/2 inch bolt circle. The drum comes with the races already installed, but the # 25580 and # 02475 bearings and # RG06-070 grease seal are sold separately.
    view full answer...
  • Is Dexter 12-1/4 x 5 Brake Assembly # 23-446 Compatible with Dexter Hub/Drum Assembly # 8-285-11UC3
    I did not find any purchase history for you but the electric drum brake that you referenced, Dexter # 23-446, is a left-hand 12-1/4 x 5-inch-wide brake. Its matching right-hand part is # 23-447. The hub/drum you referenced, Dexter part # 8-285-11UC3, is a 12-1/4 diameter x 3-3/8-inch-wide hub. These parts do not work together. The brake is rated for 15,000-lb axles while the hub/drum is rated for 8000-lb axles. Both their sizes and weight ratings are incompatible with each other. You will...
    view full answer...
    Image 1 for
  • Correct Bearings, Seals, and Brakes for a Lippert 8,000 Lb Axle
    The Lippert 8,000 Lb Axles use a part # 25580 inner bearing, a part # 02475 outer bearing, and a part # GS-2250DL grease seal. Then for the brakes, you'd need the Electric Trailer Brake Kit part # AKEBRK-8. In regards to the leaf springs and shackle straps, you'd need to measure for these unfortunately but if you let me know the type and length of the leaf springs I'd be glad to see if we have an an option for you.
    view full answer...
  • Parts Needed to Convert 7K-8K Tandem Dexter Axle Trailer to Disc Brakes
    Thank you for the photo! I was able to reach out to my contact at Dexter Axle who confirmed that the hubs use a # 25580 inner bearing, # 02475 outer bearing, and a 10-36 (part # RG06-070) grease seal. Since we have this info now we can make sure the disc brake kit will fit correctly. With all of that being said, I highly recommend the HydraStar Disc Brake Kit w/ Actuator for Tandem Axle Trailers # HSE7K-T1 which comes with bearings and a seal that matches the spindles (they have the same...
    view full answer...
    Image 1 for
  • Timbren Trailer Suspension Kits and Disc Brake Upgrades For Lippert 7,000LB Trailer Axles
    The Timbren Silent Ride Suspension for Tandem Axle Trailers w/ 3" Round Axles # TSR7000T05 will be the easiest way to change your suspension to a more independent and progressive suspension. This will allow you to use the axles you already have so you will not even need to remove your current brakes to make the change. The total installation will be much easier as well. If you prefer to use the Timbren Axle-Less Trailer Suspension System # TASR7KS01 you will be able to still use your...
    view full answer...
  • Recommended Way to Add Disc Brakes to 2020 Momentum 376THS
    The first thing you'd want is the Kodiak Disc Brake Kit # K2HR79E for each axle. This is a 7k kit with an oil bath dust cover that fits your current spindles and also is compatible with your wheel size. For bearings you'd need to order the # 25580 and # 02475 separately as well as the seal # 10-63 as they are not included. Since you have a triple axle trailer you'd need three of the disc brake kits and 6 each of the bearings and seals. For an actuator kit the best option is the Hydrastar...
    view full answer...
  • Disc Brake Kit Recommendation for 7,000 lb Dexter Axles
    For Dexter 7k axles we have the Kodiak XL Disc Brake Kit part # K2HR79E which is a confirmed fit and would work well. You will need to provide the bearings though which are part numbers # 25580 and # 02475. For a grease seal you would need part # RG06-070.
    view full answer...
  • Correct Replacement Bearing and Race to Match 02475 Bearing and 14276 Race
    There are differences in them but we do have what you are looking for and they can in some situations be used together. The Replacement Trailer Hub Bearing you have part # 02475 and Replacement Race for 02475 Bearing part # 02420 are designed to work together and the. The race you have Replacement Race for 14125A Bearing part # 14276 for bearing part # 14125A. With that said both bearings have the same inner diameter but the races are slightly different in size the 02475 is 2.688" outer...
    view full answer...
  • Correct Bearings and Seals for a 2022 Grand Design Solitude 390RK
    The correct bearings and seals for a 2022 Grand Design Solitude 390RK are as follows: Inner Bearing: part # 25580 Outer Bearing: part # 02475 Grease Seal: part # GS-2125DL (2.125") Grease Seal: part # GS-2250DL (2.250")
    view full answer...


< Previous
123. . .5



Do you have a question about this Trailer Bearings Races Seals Cap?


Info for this part was:

Employee Jeff D
Installed by:
Jeff D
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Chris R
Video Edited:
Chris R
Employee Wilson B
Updated by:
Wilson B
Employee Jonathan Y
Video by:
Jonathan Y
Employee Robert C
Test Fit:
Robert C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.