Disc Brake Conversion Kit For A Lippert 8 Lug 8K Axle

Updated 10/04/2022 | Published 10/03/2022

Products Featured in This Question

Kodiak Disc Brake Kit - 13" Hub/Rotor - 8 on 6-1/2 - E-Coat - 8,000-lb AL-KO/Quality

(1)

$794.74

Replacement Trailer Wheel Bearing - 02475 - Qty 1

(2216)

$18.79

Replacement Trailer Wheel Bearing - 25580 - Qty 1

(2216)

$24.71

Hydrastar Electric Over Hydraulic Actuator Kit for Disc Brakes - 1,600 psi

(249)

$1167.19

Kodiak Disc Brake Kit - 13" Hub/Rotor - 8 on 6-1/2 - Dacromet - 8,000-lb Dexter

(10)

$809.26

Grease Seals 10-36 - Double Lip - I.D. 2.250" / O.D. 3.376" - 5.2K to 8K Axles

(2675)

$8.45

Question:

I need to convert lippert 8K alxes to disc brakes, Do you have a complete kit? LIppert 8000 # axles 8 Lug

asked by: CRIS R

Helpful Expert Reply:

I have the perfect Disc Brake Conversion kit for your 8K Lippert Axle!

First you will need The Kodiak Disc Brake Kit # K2HR89DD. This kit has a cast iron construction and resists corrosion with its Dacromet plating. The kit has a 8 on 6-1/2 inch bolt pattern, and has a 4 bolt brake flange configuration. The Inner Bearing # 25580 The Outer Bearing # 02475 and Seal # RG06-070 are sold separately.

The Hydrastar Electric Over Hydraulic Actuator Kit for Disc Brakes # HBA16-252-82. Using this kit will give you greater control over your trailer's brakes by giving you a faster response time, providing proportional braking for smooth, effective stops, and by providing you quick adjustment when you change trailers or loads.

I attached a couple installation link videos below.