Replacement Electric Trailer Brakes For A Hayes 8K 4 Bolt Axle
Published 10/19/2022
Products Featured in This Question
Question:
Is the Dexter Brake # K23-532-533-00 4 bolt pattern 3-3/4 inches on center.
asked by: Chi V
Expert Reply:
Yes, The Dexter Electric Trailer Brake Kit - Self-Adjusting - 12 inch - Left Hand and Right Hand - 8K # K23-532-533-00 will work with your Hayes 8k 4 bolt axle.
When it comes to getting the correct hub and drums you will have to first find out what your Inner and Outer Bearing numbers are on your current hub. The bearings should have an etched or stamped number on it. If you can not find the stamp you can measure the inner diameter of the bearings using The Digital Caliper # PTW80157. When you find the correct measurements or find the bearing numbers you have reach back out to me and I will be able to find you the correct parts needed.
The Dexter Trailer Hub and Drum Assembly for 8,000-pound Axles # 8-285-9UC3 has an Inner Bearing # 25580 (1.75 inch inner diameter) and an Outer Bearing # 02475 (1.25 inch inner diameter), and has a bolt pattern of 8 on 6-1/2 inches.
I attached a review video link below.
(click to enlarge)
(click to enlarge)
Product Page this Question was Asked From
Dexter Nev-R-Adjust Electric Trailer Brakes - 12" - Left/Right Hand - 8K AL-KO/Hayes Axles
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 12 x 3-3/8 Inch Drum
- 8000 lbs Axle
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: 21~88
- Search Results: shackle strap
- Search Results: tools
- Search Results: 12k trailer jack
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Advent Air RV Air Conditioner System - 13,500 Btu - Non-Ducted - ADB Controls - White - R32
- Search Results: oil cap
- Search Results: dometic ac shroud
- Search Results: 8k hub
- Q&A: Correct Braking Assemblies for Haynes Axle with 6 Bolts
- Shop: 6-Leaf Slipper Spring w/ Hook End for 8,000-lb Trailer Axles - 29-1/2" Long
- Shop: U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles - 5-1/2" Long U-Bolts
- Shop: Optronics LED Trailer Light - Brake, Tail, Turn - Submersible - Oval - Red
- Shop: Peterson Piranha LED Clearance or Side Marker Trailer Light - Submersible - 2 Diodes - Amber Lens
- Shop: Optronics LED Trailer Tail Light - Stop, Turn, Tail - Submersible - 6 Diodes - Oval - Red Lens
- Article: Testing Trailer Brake Magnets for Proper Function
- Q&A: What Is The Torque Specifications On A 9/16 Inch Lug Nut
- Q&A: Will etrailer.com 12-1/4 inch by 3-3/8 inch Brake Assemblies Replace Dexter Brand
- Q&A: Replacement Electric Brake Assemblies For an 8,000LB Dexter Axle Manufactured In 1996
- Q&A: Do All Dexter Brakes Have Same Bolt Hole Pattern
- Q&A: Is There Difference Between etrailer and Dexter 8k Trailer Brake Assembly Sets
- Q&A: 8k Rated etrailer Hub/Drums that Work as Replacement for Dexter 8-285 Hub
Chi V.
1/1/0001
Is the Dexter Brake # K23-532-533-00 4 bolt pattern 3-3/4 inches on center.