Recommended Trailer Hub To Convert Trailer From 5 Spoke Wheels To 8 x 6.5 Pattern
Updated 05/11/2020 | Published 10/24/2017
Products Featured in This Question
Question:
Hi there. I'm trying to convert my trailer from 5 spoke utility wheels to 8x6.5. The trailer needs the brakes serviced anyways so I'm looking to do it all at once. The hub currently on the trailer is stamped Dexter 8-174. the trailer manufacturer told me it has 6000 lb axles. looking at the brake backing plate, the brake backing plate is the 5 bolt style. Can you decipher what drum/hub and brakes the axle has from that info? If I need to pull a hub to measure that's fine just let me know. Trailer is a 1996 Interstate 18ST - 18,000GVW.
asked by: Joe
Expert Reply:
Based on the information you provided, I recommend the Etrailer Trailer Hub and Drum Assembly Item # AKHD-865-8-K. This hub-and-drum assembly fits 8,000-lb axles (will work on your axles but limited to capacity). It includes an inner bearing (Item # 25580) and race and an outer bearing (Item # 02475) and race, grease seal, grease cap, wheel bolts, and lug nuts. It fits an 8 on 6-1/2 inch bolt pattern.
Make sure to confirm that these parts will work with your bearings and trailer.
For brakes, I recommend Electric Trailer Brake Kit with Left and Right Hand Assemblies Item # AKEBRK-7-SA. These are 12 inch self-adjusting brakes. They will work with your axles.
Additional information and videos attached.
Product Page this Question was Asked From
Trailer Hub and Drum Assembly - 8,000-lb Axles - 12-1/4" Diameter - 8 on 6-1/2
- Trailer Hubs and Drums
- Hub with Drum
- Standard
- 25580 / 02475
- Standard Grade
- For 8000 lbs Axles
- 9/16 Inch Stud
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Cam-Action Lockable Door Latch for Fold Down Trailer Gate or Side Door - Aluminum
- Shop: Trailer Hub and Drum Assembly - 8,000-lb Axles - 12-1/4" Diameter - 8 on 6-1/2
- Search Results: trailer door latch
- Search Results: door roller
- Search Results: trailer door parts
- Search Results: gooseneck hitch
- Search Results: goosneck ball
- Shop: Gooseneck Hitch
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Search Results: trailer hitch
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Wiring
- Search Results: trailer tires and wheels
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: Suspension Enhancement
- Shop: Power Mountain Tallboy Off-Road Bottle Jack - 8-1/2" to 37-3/4" Lift - 6 Tons
- Q&A: Best Suspension Upgrade for 33" Tandem Axles: Road Armor vs Dexter EZ Flex for Ember 22ETS
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Installation Time for Blue Ox BX1128 Flat Tow Base Plate Kit for 2016 Jeep Grand Cherokee
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Shop: Brake Controller
- Video: A Look at the Power Mountain Tallboy 6 Ton Off-Road Bottle Jack with a Military Cargo Trailer
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Shop: etrailer Anti-Rattle Hitch Collar for 2" Hitch Receivers
- Video: Measuring To Choose The Right Trailer Axle
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
on Trailer Hubs and Drums
Dustin
5/8/2020
Will this set up work to convert my old hillsboro trailer axles?