Popular Brands By Category

Towing

Sports & Recreation

Trailer

Vehicle

RV & Camper

What our customers are saying:

Very helpful/friendly Customer Service. Competitive Pricing. Shipping was Fast.

John

Mankato, MN

Save 100 Dollars on Select BedLocker Electric and UltraGroove Electric Covers Save 75 Dollars on Select UltraGroove, UltraGroove Metal, JackRabbit, and Full-Metal JackRabbit Covers

pace edwards





Pace Edwards Reviews and Installation Videos


Expert Answers about Pace Edwards

  • Pace Edwards Tonneau Cover Recommendation for 2019 Ford F-350 Short Bed Towing 5th Wheel
  • A fifth wheel hitch could fit under a Pace Edwards Switchblade tonneau like the part # 311-SWFA18A44 that you referenced but like you said it would have to be adjusted low enough to allow that. Your other concern about the front of the tonneau be raised would be an issue if your trailer overhang was pretty close to the bed rails of the truck. You have to have at least 6 inches between the bedrails and the trailer overhang to not have interference. So if that dimension is tight on your...
    view full answer...

  • Yakima Roof Rack to Fit Pace Edwards UltraGroove Metal Tonneau Cover on a 2017 Toyota Tacoma
  • I spoke with my contact at Yakima who said that they haven't tested a roof rack with a Pace Edwards UltraGroove Metal Hard Tonneau Cover, part # 311-KMTA10A38 or # 311-KMTA09A37 for a 5' or 6' bed respectively, but he did give me a list of parts for a roof rack that "should" work for your 2017 Toyota Tacoma. For your UltraGroove Metal tonneau cover you can use 2 of the Landing Pad 1 Kits # Y00221, 1 of the SkyLine Tower # Y00148, and then some crossbars. At the very minimum you can use...
    view full answer...

  • Difference Between Pace Edwards UltraGroove and SwitchBlade Retracting Metal Tonneau Covers
  • For your 2017 Ram 1500 with a 5-1/2 foot long bed the part # 311-SMD77A01 is the Pace Edwards SwitchBlade tonneau and the part # 311-KRD77A01 is their UltraGroove cover. Both of these are spring loaded so that to open them you just release the lever and the slide forward fully open. The UltraGroove can then be pulled back closed or stopped partially open and the Switchblade will be either fully open or fully closed. It can not partially open. The UltraGroove also has a T-slots so that...
    view full answer...

  • Which Tonneau Can be Used with Thule TracRac Sliding Ladder Rack on 2017 Ford F-250 Short Bed
  • There's only one tonneau cover that can fit with the Thule TracRac SR Sliding Ladder Racks like the part # TH43003XT-785 which fits your 2017 Ford F-250 short bed and it's the BAK Revolver part # BAK79330 as it is the only cover that installs far enough to the inside of the bed rails to allow the uprights to clear.
    view full answer...

  • Could Headache Rack Fit With PaceEdwards Switchblad Tonneau
  • Since the DeeZee Headache Rack w/ Custom Mounting Brackets - Louvered Screen # DZ95050SL-10B has a portion of the base that wraps around the inside of the bed rails it would not be compatible with the Pace Edwards SwitchBlade Hard Tonneau Cover # 311-SWC95A17.
    view full answer...

  • Which Tonneau Cover Works with the TracRac SR on a 2007 Toyota Tundra with 6-1/2 Foot Bed
  • I do have a tonneau cover that will work with the TracRac SR Sliding Truck Bed Ladder Rack part # TH43002XT-610 but after taking a look at how the Pace Edwards SwitchBlade Hard Tonneau Cover part # 311-SWT5173 installs, I do not believe it will work with the TracRac SR. The base rails on the cover appear to just slightly cover the rear stake pocket holes on your 2007 Toyota Tundra which the SR needs to install. In addition to stake pocket opening, the base rails are not flush to the bed...
    view full answer...

  • Can Pace Edwards UltraGroove Tonneau Cover Install on 2017 Tacoma with Fiberglass Bed Sides
  • The Pace Edwards UltraGroove Hard Tonneau Cover # 311-KRTA10A38 referenced in your question is confirmed to fit your 2017 Toyota Tacoma with the 5 foot bed and is indeed compatible with the fiberglass bed liner on the truck's side rails. I confirmed this with my contact at Pace Edwards. The factory deck rail system on your Tacoma will just likely be limited or disabled with the cover installed, but it sounds like that isn't an issue for you. I have attached a short video review on this...
    view full answer...

  • Can Pace Edwards SwitchBlade Hard Tonneau Cover # 311-SWFA19A45 be Opened Partially
  • The Pace Edwards SwitchBlade Hard Tonneau Cover # 311-SWFA19A45 can be slid only partially open if needed. If you check out the 50 second mark of the video I attached you'll see that our demo guy partially opened it and it stayed there once he let go of the cover.
    view full answer...

  • Compatibility of Rhino-Rack Pioneer Platform on Pace Edwards Ultragroove Tonneau Covers
  • The Pace Edwards UltraGroove Metal Hard Tonneau Cover - Retractable - Aluminum - Matte Black # 311-KMTA10A38 and the Pace Edwards UltraGroove Hard Tonneau Cover - Retractable - Aluminum - Matte Black # 311-KRTA10A38 will allow you to install a Rhino-Rack system. I recommend the Track Mount RLCP Legs for Rhino-Rack RTC- and RT-Style Roof Rack Tracks - 3" Tall - Qty 4 # RLT500-2 along with the Rhino-Rack Heavy-Duty Roof Rack Crossbars - Black - 71" Long - Qty 2 # RB1800B-2. Then you...
    view full answer...

  • Recommended Tonneau Cover for 2019 Ram 3500 With 8 Foot Bed and Fifth Wheel Hitch
  • For a tonneau cover that will work with your 2019 Ram 3500 that has an 8 foot bed and a fifth wheel hitch I highly recommend checking out the Pace Edwards JackRabbit # 311-JRD7936. This is a retractable tonneau which makes it ideal for a fifth wheel hitch, although please keep in mind the highest point of the hitch must be 2 inches below your bed rails for a tonneau to close over it. The JackRabbit # 311-JRD7936 is made of aluminum panels, can be easily retracted with the turn of...
    view full answer...

  • Tonneau Cover Compatible With 5th Wheel Hitch for 2016 Chevy Silverado 3500 With 6-1/2 Foot Bed
  • While we definitely have an option for you, the Pace Edwards SwitchBlade Hard Tonneau Cover # 311-SWC95A17 does sit 2 inches below the rails, so if you only have 1 inch, it will interfere with your hitch. The best option is going to be a tonneau that is a fold-up and sits slightly on top of your bed rails, and for your 2016 Chevy Silverado 3500 with a 6-1/2 foot bed I strongly recommend the Extang EnCore Hard Tonneau Cover # EX62450. Even though it is technically an above the rails...
    view full answer...

  • Tonneau Cover Needed for a 2010 Chevy Silverado 6-1/2 Bed Compatible with the Utility Rig Rack
  • To utilize the Pace Edwards Utility Rig Rack, part # 311-UR3005, on your 2010 Chevrolet Silverado with a 6-1/2 foot bed without the Cargo Management System you will need the Bedlocker, JackRabbit, and Full Metal JackRabbit tonneau cover with Explorer Series Rails. It is not compatible with the SwitchBlade # 311-SWC0303, and the tonneau cover that you use must have the Explorer Rails. The BedLocker is part # 311-BEC0303 The JackRabbit is part # 311-JEC0303 The Full-Metal JackRabbit...
    view full answer...

  • Weight of Pace Edwards SwitchBlade Hard Tonneau Cover # 311-SWD7833
  • The Pace Edwards SwitchBlade Hard Tonneau Cover # 311-SWD7833 referenced in your question has a total weight of just under 70 pounds. Its aluminum constructed panels help to keep its weight down while also resisting any rust and corrosion over time. I have attached a short video review on this system along with the written installation instructions that you can take a look at as well.
    view full answer...

  • Pace Edwards Full-Metal JackRabbit Hard Tonneau Cover's Canister on 2018 Ford F-350
  • The canister on the Pace Edwards Full-Metal JackRabbit Hard Tonneau Cover # 311-FEFA19A45 sits just under the rails of the tonneau cover, so it will not be deep in your 2018 Ford F-350's truck bed. The canister measures 9.75" wide x 9.25" in diameter, though I'm not quite sure what you mean by its length from inside the truck bed to cover; if you can give me a bit more specifics in that regard I'd be happy to try and find out for you.
    view full answer...

  • Is Pace Edwards UltraGroove Tonneau Cover Compatible with Bed Liner
  • We've confirmed with Pace Edwards that the Pace Edwards UltraGroove covers like the part # 311-KMC95A17 that you referenced will work with bed liners.
    view full answer...

  • Tonneau Cover to Fit 2014 Ram 1500 6.5 ft Bed with Thule TracRac Sliding Rack
  • The only tonneau cover we can recommend for use with a TracRac sliding ladder rack is the Bak Revolver cover as it's the only one that's narrow enough to fit with the ladder rack. The Pace Edwards you mentioned would not work with a ladder rack. So what you'd need is the Revolver tonneau part # BAK79213 and the TracRac # TH43003XT-501 and you'd have a ladder rack and tonneau cover combo that would fit and work well on your 2014 Ram 1500 6-1/2 foot bed.
    view full answer...

  • Roof Rack for Pace Edwards Tonneau Cover and 2018 Ford F-150 SuperCrew 5-1/2 Bed Roof
  • In order to mount a set of cross bars onto a Pace Edwards Hard Tonneau Cover you would need to use the BedLocker part # 311-BEFA05A28, the JackRabbit part # 311-JEFA05A28, or the Full-Metal part # 311-FEFA05A28 because these are the only options that have the Explorer Rails which you need to use cross bars. Once you choose one of the above three you can then add cross bars with the Thule ProBar System part # TH713700, part # THKIT3101, and part # TH460R. This system can then be used...
    view full answer...

  • Retractable Tonneau Covers that Fit 2018 Toyota Tacoma with Deck Rail and 5 ft Bed
  • For your 2018 Toyota Tacoma 5 foot bed with the deck rail system the Pace Edwards JackRabbit Tonneau # 311-JRTA10A38 that you referenced is a confirmed fit. Pace Edwards states that the cover "may disable or limit use of the deck rail system. Basically you'll be able to leave the deck rail in place but won't be able to use it with the cover installed. The similar RetraxPRO XR Hard Tonneau Cover # RTT-80851 actually uses the rail to install the cover so it would prevent access as well.
    view full answer...

  • Retractable Tonneau Cover Recommendation for 2017 Ram 2500 with Short Bed and TracRac Ladder Rack
  • I have a similar retractable tonneau cover that is as fit for your 2017 Ram 2500 short bed, but the Pace # 311-SMD7833 would not be it as it overlaps the bed rails slightly. Instead the # BAK26203 would be your best option as it is a fit for your truck and would work well with a TracRac sliding ladder rack like the part # TH43003XT-000 which is a fit for your truck.
    view full answer...

  • How Does Pace Edwards SwitchBlade Locked when Closed on a 2018 Chevy Silverado 1500 6-1/2 Bed
  • The Pace Edwards SwitchBlade # 311-SWC95A17 that you referenced has a pinch latch that you use to open in the middle of the cover (see attached picture). When you close it all of the way and then close your tailgate the only way to open the cover is to first open up the tailgate. If your tailgate can be locked this provides you with truck bed security. If you are looking for something that can be opened from the outside yet still secures the contents of your truck bed then I recommend...
    view full answer...

  • How To Add Crossbars To A Pace Edwards UltraGroove Tonneau Cover On a Toyota Tacoma
  • Yes, in order to add a set of black aero crossbars to the Pace Edwards UltraGroove Metal Hard Tonneau Cover you can use the Rhino-Rack Vortex Crossbar System part # RRVA165B-RRRLT600. This system comes with black, 65" long aero crossbars that have the top channel for any channel mounted accessories. They will be a direct fit for the tracks on your Pace Edwards UltraGroove Metal Hard Tonneau Cover.
    view full answer...

  • Does Pace Edwards SwitchBlade Hard Tonneau For 2019 Ford F-350 Long Bed Cover Stake Pockets
  • The Pace Edwards SwitchBlade Hard Tonneau Cover # 311-SWFA19A45 that you referenced leaves stake pockets mostly open but covers a portion of them. It would not interfere at all with pulling a fifth wheel trailer though. There would be plenty of clearance all around for the hitch and trailer to work well. I attached a review video for the tonneau cover for more info for you to check out as well.
    view full answer...

  • Tonneau Cover for 2018 Toyota Tacoma 5 Foot Bed w/Thule TracRac Sliding Ladder Rack TH43001XT-501
  • The only Tonneau cover that we know will work with the sliding ladder rack # TH43001XT-501 on your 2018 Toyota Tacoma with 5 foot bed is the BAK Revolver # BAK39426 or # BAK79426. No part of the Tonneau cover encroaches onto the tops of the bed sides which is why they will work. I can't guarantee that the same could be said for any of the other available covers including # 311-SWTA10A38. The good news is that there are these covers that will work and the sand you mentioned from the kayaks...
    view full answer...

  • Will the Pace Edwards UltraGroove on a 2018 Ram 2500 Work with a Sidewinder Pin Box
  • The Pace Edwards UltraGroove hard tonneau covers are a confirmed fit for your 2018 Ram 2500 as long as you don't have the RamBox. Since your trailer is equipped with a Sidewinder pin box you don't need to worry about the pin box coming into contact with the sides of your tonneau cover as the pin box doesn't move. We have 3 different versions of the UltraGroove for you to choose from. Part # 311-KED7833 is aluminum and powered, part # 311-KMD7833 is aluminum and not powered, and part...
    view full answer...

  • Is Pace Edwards SwitchBlade Hard Tonneau Cover 311-SWF6985 Compatible with 5th Wheel Hitch
  • Since 5th wheel hitches have adjustable height settings you'll want to check the height of the head assembly on your specific hitch to determine if it will fit under the Pace Edwards SwitchBlade Hard Tonneau Cover # 311-SWF6985. This cover's underside when installed will extend down below the top of the bed rails by 2-inches according to my technical rep at Pace Edwards. The other aspect of its fit is the space behind the cab taken up by the canister. This part will take up approximately...
    view full answer...

  • Can a Tonneau Cover be Used with a Headache Rack on a 2018 GMC Canyon with 5 Foot Bed
  • I do have a similar tonneau cover you can use with the Aries Switchback Headache Rack part # AA1110109 on your 2018 GMC Canyon with the 5' bed but the Pace Edwards UltraGroove Metal Hard Tonneau Cover part # 311-KMCA03A25 covers the stake pocket openings and as that is where the Switchback mounts, they will not work together. Instead, I recommend taking a look at the BAK Revolver X4 Hard Tonneau Cover part # BAK79126 because it does not cover the stake pocket openings and is constructed...
    view full answer...

  • Recommended Retractable Tonneau Cover for a 2017 Ram 1500
  • I do have a retractable tonneau cover confirmed to fit your 2017 Ram 1500 with the 6' 4" bed but unfortunately, we no longer carry the RollBAK G2 Hard Tonneau Cover's. Instead, I recommend taking a look at the Pace Edwards SwitchBlade Hard Tonneau Cover part # 311-SWD7833. The Pace Edwards SwitchBlade has integrated drain tubes to prevent water from entering the truck bed, laminated rigid aluminum panels for protection, and offers an easy no-drill installation. I have attached a review...
    view full answer...

  • Is Pace Edwards SwitchBlade Tonneau Cover Waterproof
  • There isn't a tonneau cover that will be completely water tight but the Pace Edwards SwitchBlade part # 311-SWC95A17 will be about as waterproof as one can be. The rails of the system have a really effective drain system that works to basically divert all water out of the truck bed and then the top cover does a really great job preventing leaks. But if you were in a torrential downpour you'd still most likely have some water in the bed of your truck. I attached an install video for this...
    view full answer...

  • Correct Pace Edwards Contractor Rig Rack Ladder Rack for 2011 GMC Sierra with 6-1/2 Foot Bed
  • The Pace Edwards Contractor Rig Rack Truck Bed Ladder Rack # 311-CR4005 referenced in your question is the correct rack for your 2011 GMC Sierra that features the 6-1/2 foot bed. Please note though that this particular ladder rack is designed specifically to mount to the Explorer Series Rails that are on certain Pace Edwards Tonneau Covers. In order to install this ladder rack on your truck you first need to install the correct tonneau cover. If this is what you are wanting then I recommend...
    view full answer...

  • Aluminum Ladder Racks that Fit 2015 Toyota Tacoma with 6 ft Bed
  • For your 2015 Toyota Tacoma 6 foot bed we have aluminum ladder racks like the T-Rac Pro2 part # TH37004XT which fits if you do not have the deck rail system or the Thule TracRac TracONE part # TH27000XT-TAEX which fits if you do have the deck rail system. Both of these kits install easily, are made in the USA and will work great with plenty of weight capacity.
    view full answer...