I have attached for you below the pairing procedure for the Voyager WiSight Wireless RV Backup Camera System part #ASA84YR. Please note, a mistake I have made in the past was applying power to the camera too soon, this cannot be done until the…
I believe I have found the replacement wheel you are looking for. It's kind of hard to see in our product pictures but the Dexstar Steel Mini Mod Wheel part #AM20443 has a sticker on it that reads 17-231 and is a 15 inch diameter wheel with a 5…
Hey Allen. I have the rim and hub cap but we do not carry white wall tires. For a 13" rim with a 5 on 4-1/2 lug nut pattern that works with baby moon hub caps, you'll want the Dexstar Conventional Steel Wheel item #AM20214. This is a…
For a wheel that is 5 inches in width and 15 inches in diameter you would want tires that are size ST205/75-15. For the tire size ST225/75R15 you listed you would want a rim that is from 6-7 inches in width. I attached a department page that has all…
For a trailer tire, the narrowest option rim for any given tire is going to be the best option. For a 205/75-15, the best option would be a 5 inch rim. The reason that narrower is better is because it provides more support for the tire. Since trailer…
The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…
In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.
The difference on a 15X5 tire and a 15X6 is the width of the wheel. The 15X5 being 5 inch width and the 15X6 being a 6 inch width. I recommend The Dexstar Steel Spoke Trailer Wheel #AM20428. The wheel has a 5 on 5 bolt pattern with a pilot diameter…
The 5 means that the wheel is 5 inches wide from bead to bead (not overall width). The J indicates the design of the wheel bead seat but it is nothing you need to be concerned with as this is the most common shape for all trailer tires. To measure…
Hey Nate, We do not have a 3/4" spindle nut or washer, the smallest option is the 7/8" spindle nut #165931and a 1" washer #SW1000. I cannot find anything smaller. Are you sure the threads on you're spindle are 3/4"? If they…
Hello again Hayden. Wheel width is measured bead seat to bead seat, see the attached photo. Did you measure the overall width? I'm guessing you did, and that measurement would be about at 7" for the 16" x 6" #AM20742. Assuming you…
I believe the wheel that they are refering to is the Dexstar Conventional Steel Wheel #AM20766. This has the same 8 on 6-1/2" lug pattern that the 1953 Chevrolet Advance Design Trucks had. This wheel is only 16" in diameter where the…
etrailer’s Dexstar Wheel Supportetrailer offers a selection of Dexstar wheels, backed by expert guidance on selection and setup.Our team provides tips for maintenance to keep your wheels functioning at their best.Count on etrailer for ongoing support with all Dexstar products.
Dexstar: Quality Steel Wheels for Trailers
Dexstar provides durable, high-quality steel wheels crafted for a smooth and stable towing experience.
