Hey Dave, thanks for the pictures! Based on what you have and what you are looking for the Tie Down Spare Tire Mount part #TD66FR that you referenced would be a great option. This is very similar to what you have now so it would do a great job.
Hi Frank, While we can get you a brake controller for your 2020 Chevy Colorado, there isn't a plug-in option and harness because the truck doesn't have a plug under the dash. That said, the wires are already run to the cab, so it isn't…
Hey George. The Power Mountain Tallboy Off-Road Bottle Jack item #PM34FR is only rated for 6-tons but it's not like you're raising up the entire motorhome. Most of the weight is going to be on the back though and since it is a dually, I…
Hey Gwen! The distance from the center of the mounting hole to the bottom of the Trailer Valet JX Trailer Jack #TV35FR when fully retracted is 13.44". If you’re measuring from the bottom of the pipe mount instead of the center of the hole, that…
Hello Rhonda, thanks for reaching out. Yes, we do offer both front and rear mud flaps for the 2024 Chevy Colorado Trail Boss with fender flares. For that I recommend the following: - WeatherTech Mud Flaps - Easy-Install, No-Drill, Digital Fit - Front…
Hey Ed, yes the solenoid of the reverse lock out is going to click when it is activated. You would definitely be able to hear it too. Have you tried this already?
Hi Henry; the Power Mountain Tallboy Off-Road Bottle Jack #PM34FR you were looking at will work well for your Cybertruck. This has a 6 ton weight capacity which will be more than enough to handle your truck and a lift range of 8-1/2" to…
Hey Anthony! The outer diameter of the weld-on pipe coupling on the Trailer Valet JX Trailer Jack #TV35FR is 2.01". I went ahead and attached some dimensional drawings below for your reference. What kind of trailer do you have?
Hey Bill, thanks for reaching out! The Optronics Smoke Lens ID Light Bar #OPT55KB doesn't have Lumen or Candela ratings according to my contact at Optronics. I will say that this will be about the equivalent of a light on your vehicle. So there…
Hey Chris, in the instructions for the B and W Turnoverball gooseneck hitch part #BW73FR that you referenced it says that the inner brackets are not needed if the truck has the inner brackets for the OEM hitch already welded to the truck frame. In…
Yes The Ultra Bright LED Flood Light #3371492196 can be used as a backup light when connecting to your reverse blue wire from the 7 plug, but you need to make sure that the circuit can handle the power of the light. Each light runs 6.25 amps, since…
Hey Dave, thanks for the pictures! Based on what you have and what you are looking for the Tie Down Spare Tire Mount part #TD66FR that you referenced would be a great option. This is very similar to what you have now so it would do a great job.
Hi Frank, While we can get you a brake controller for your 2020 Chevy Colorado, there isn't a plug-in option and harness because the truck doesn't have a plug under the dash. That said, the wires are already run to the cab, so it isn't…
Hey George. The Power Mountain Tallboy Off-Road Bottle Jack item #PM34FR is only rated for 6-tons but it's not like you're raising up the entire motorhome. Most of the weight is going to be on the back though and since it is a dually, I…
Hey Gwen! The distance from the center of the mounting hole to the bottom of the Trailer Valet JX Trailer Jack #TV35FR when fully retracted is 13.44". If you’re measuring from the bottom of the pipe mount instead of the center of the hole, that…
Hello Rhonda, thanks for reaching out. Yes, we do offer both front and rear mud flaps for the 2024 Chevy Colorado Trail Boss with fender flares. For that I recommend the following: - WeatherTech Mud Flaps - Easy-Install, No-Drill, Digital Fit - Front…
Hey Ed, yes the solenoid of the reverse lock out is going to click when it is activated. You would definitely be able to hear it too. Have you tried this already?
Hi Henry; the Power Mountain Tallboy Off-Road Bottle Jack #PM34FR you were looking at will work well for your Cybertruck. This has a 6 ton weight capacity which will be more than enough to handle your truck and a lift range of 8-1/2" to…
Hey Anthony! The outer diameter of the weld-on pipe coupling on the Trailer Valet JX Trailer Jack #TV35FR is 2.01". I went ahead and attached some dimensional drawings below for your reference. What kind of trailer do you have?
Hey Bill, thanks for reaching out! The Optronics Smoke Lens ID Light Bar #OPT55KB doesn't have Lumen or Candela ratings according to my contact at Optronics. I will say that this will be about the equivalent of a light on your vehicle. So there…
Hey Chris, in the instructions for the B and W Turnoverball gooseneck hitch part #BW73FR that you referenced it says that the inner brackets are not needed if the truck has the inner brackets for the OEM hitch already welded to the truck frame. In…
Yes The Ultra Bright LED Flood Light #3371492196 can be used as a backup light when connecting to your reverse blue wire from the 7 plug, but you need to make sure that the circuit can handle the power of the light. Each light runs 6.25 amps, since…
Illuminate Your Work with Optronics LED Work Lights
Optronics LED work lights are perfect for those who need reliable, bright lighting for various applications. Whether you're mounting them on a truck, trailer, or boat, these lights offer durability and excellent illumination. Ideal for both professional and personal use, they are easy to install and provide a dependable light source.
Optronics LED work lights are built to withstand various conditions, from the back of a truck to a boat trailer. They provide consistent, bright illumination, making them ideal for outdoor use, even in challenging weather. Their robust construction ensures they remain reliable over time.
These lights are perfect for trailers due to their easy installation and bright output. They enhance visibility when backing up or loading at night. With a flood beam pattern, they illuminate a wide area, making them a practical choice for trailer owners.
Yes, Optronics LED lights are designed for straightforward installation. They come with necessary hardware and can be mounted in various applications. Many find the process quick and hassle-free, allowing you to enjoy enhanced lighting without delay.
Optronics offers a great balance of quality and value. While some brands may be more expensive, Optronics provides reliable performance at a reasonable price. Their lights are known for being bright, durable, and versatile, making them a popular choice among enthusiasts.
LED lights, like those from Optronics, are more durable and energy-efficient than incandescent bulbs. They offer brighter illumination and have a longer lifespan, reducing the need for frequent replacements. This makes them a cost-effective and reliable lighting solution.
Filters
