Filter by Amperage
Videos
for Solar Charge Controllers
Help Articles
for Solar Charge Controllers
Expert Answers
for Solar Charge Controllers
Hi David, thanks for reaching out! The older Go Power PWM-30 Solar Controller has been discontinued, but you can use the Go Power PWM Solar Charge Controller with Bluetooth #GP76QR along with the Installation Adapter Plate #GP86QR to replace it! I…
view full answer...Hey Jesse! If it's just the LED light strip that's peeling off, then I recommend picking up some strong adhesive double-sided take and securing it back in place with that, but if you're talking about the "bar" that the light…
view full answer...Yes, it will! The Go Power PWM Solar Charge Controller with Bluetooth item #GP76QR does indeed work with 12v lithium batteries. It has a maximum solar array current of 30 amps. What kind of solar panel set up do you have?
view full answer...To convert the WFCO WF-8955PEC to be lithium compatible you'd need the part #PD4655V and you'd be set. This fits in the panel without any modifications.
view full answer...Hey Dave, the wiring that comes with the etrailer RV Solar Panel Kit part #e59FV is 7.5 meters long. I attached a diagram that shows how multiple panels attach to the controller. This is compatible with lithium batteries too. Is this first time with…
view full answer...Hey Linda, Yep, it sure will; the WeatherTech Roll Up SunShade Kit #WT87QV will indeed fit your 2024 Nexus Viper 27V. This is a good choice as it is double-sided with one reflective side to keep the sun (and heat!) out of your motorhome, with the…
view full answer...Most roof vents follow the standard size opening. That size is 14-1/4 inches by 14x1/4 inches but it is most commonly referred to as 14 x14. Many different vents on the inside and outside flanges can have different measurements to gain a certain look…
view full answer...I believe instead of fix you meant fit, and yes, the MaxxAir Standard RV and Trailer Roof Vent Cover #MA00-933069 willf it over a 12" x 12" roof vent.
view full answer...We've had this question before and Advent confirmed for us that the relay box part #PXXACRG12RB does work to replace the ACRG11 and it would convert it to digital from analog.
view full answer...There is; all you need is the following mounting kit and you can tilt the solar panels of the 570 watt Go Power Overlander Solar Charging System #GP99MR: - Adjustable Mount Kit #34244034 This will let you tilt the solar panels up to 75 degrees so…
view full answer...Hi Tim; I reached out to Go Power and their representative told me the flashing on the Go Power Sun Cycle Advanced Lithium RV Battery #GP99QR meant it is in sleep mode, so the "battery charge path is enabled but discharge path is disabled and…
view full answer...Hey Lance! The Go Power PWM Solar Charge Controller #GP76QR will definitely work with your LiFePO4 batteries connected in parallel. Just make sure the BMS of the batteries you want to connect allows four of them to be hooked together (it probably…
view full answer...Filters
- 17 results
Filters
