Hi Guy, That's a great question, and thank you for providing so much detail. It really helps narrow things down. Based on your description, it sounds like you may have cruiser style or step through bikes with front baskets, and that combination…
Hey Patti, thanks for reaching out. The Swagman E-Spec Pro Bike Rack #S45SR is a solid option for this. It can hold two bikes weighing up to 70 lbs apiece on a 5th wheel, and it does not have a minimum tongue weight capacity limitation like the…
Hey Scott. The Lets Go Aero Jack-E Bike Rack item #LGA92ZR does not swivel and doesn't have a simple process for swapping out propane tanks. You'll need to remove the bolts attaching the tray to the supports to be able to remove your propane…
Hey Charles, the Swagman E-Spec part #S45SR is rated for use at the rear of a travel trailer so it will work great for you. It is odd that it's not closer connected to the other RV rated bike racks but that's our fault and I'll see if I…
THey Brian, the Coleman Mach Signature Mach 15 part #CM32RR is a really solid AC unit. As far as how it compares to the Furrion Chill Cube #FR69TD it only has the advantage of working more consistently with furnace controls. Aside from that the Chill…
Hey Ginger! The Lets Go Aero Jack-E Bike Rack for Electric Bikes - Trailer Tongue Rack #LGA92ZR requires minimum of 24-1/2" from center of jack hole to the front of the camper itself, so if you have 25" then you are right there and it would…
Hey Kenny, welcome back! The reason for that note is because all of the new systems since 2025 use R32 refrigerant due to EPA regulations. Any 2024 and older systems use R410A and their parts are not compatible with the R32 units. It doesn't mean…
Hey Tom, this is a really great question but we had an affiliate who tried all of the newer cushioned fifth wheel to gooseneck adapters and he said the MORryde Goosetec like the part #MR47MV provided the smoothest ride quality. This would be what I…
Hey Brett, the Lets Go Aero Jack-E Bike Rack for Electric Bikes #LGA92ZR that you referenced was designed to fit above propane tank covers like you can see in the attached picture. I don't see how it could fit behind the handles you have on that…
Hello Bobby, I have a great solution for you to be able to transport your two 55 lb bikes on the back of your travel trailer with a spare tire. You will want the Lets Go Aero V-Lectric VFR Bike Rack for 2 Electric Bikes #LGA25VR. This rack is rated…
No, it will not Mayra. The Universal Wheel Holder Kit item #HR89FR is designed to replace the wheel holders on the Hollywood Racks Sport Rider SE Bike Rack for 2 Electric Bikes item #HLY84FR. This is a custom fit replacement part so it's not…
Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…
RV and Camper Bike Racks with RV bumper rack for 4 bikes
Bring the whole fleet along with an RV bumper rack built to carry 4 bikes. Mounting is straightforward and sturdy, but plan a solid tie-down routine to keep four bikes secure, especially when mixing adult and kids' sizes. A little play when unloaded isn't a concern once loaded, and extra straps or padding help prevent scuffs; with smaller bikes (24" and under), tightening ratchet straps can snag rims.
Secure, even spacing and extra tie-downs help a lot. Use ratchet straps and rubber straps to hold everything down, and add foam or pool noodles on frames and rack bars to prevent paint rub. If you space for adult bikes, smaller kids' bikes may not sit down tight—adjust spacing or add padding and straps where needed.
Yes, but check a few things first. Smaller bikes 24" and under can snag wheels when tightening ratchet straps, which can bend rims—route straps carefully or switch to a frame-holding approach for those. Trikes may fit with creative positioning and extra tie-downs. Confirm your bumper can handle the combined weight of the rack and bikes.
With proper tightening and loading, it can ride solid. You may feel a little play when empty, but loading the bikes helps settle it down. Use tie-downs or rubber straps to reduce movement, and recheck the hardware after the first few miles.
It can, but verify your bumper size and construction first. Some racks call for a 4" continuously welded bumper. Make sure you have room to tighten the bolts or clamps—bumpers tucked under the trailer can make access tough. If space is tight, plan for alternate hardware or repositioning to get a solid clamp.
5th Wheel
Filters
