Hello Douglas, Thanks for writing in, and thank you for your order! I am sorry to report that the manufacturer does not have a weld pattern or installation instructions available for the Sleeve-Lock A-Frame Trailer Coupler #CA-5296-B. I know that…
Hey Mike, thanks for reaching out. Your roof thickness is going to make this tricky. That Advent system is really built around a standard roof thickness of 2-1/2" to 5", and at roughly 6-1/4" you’re outside that range. Advent doesn’t…
Hey Jonathan, We haven't heard of any issues with the P3 #90195 and plug-in harness #3070-P with a 2024 Honda Ridgeline. How are you sure that the brakes are being applied on your Honda when applying the manual override on the P3? What are you…
Hi Bill! You will need to completely replace the system since you have old Dometic R410a units on your Monaco. Everything switched to R32 refrigerant following new EPA regulations in 2025, and the new systems are not backwards compatible. For a…
Hi Collin, welcome back! The most economical replacement is going to be from Advent Air. You will need a complete system since everything moved to R32 refrigerant. If your upgraded thermostat is R32 compatible, or a smart thermostat that got a…
Hey Keith! I can definitely help you find a replacement for your Dometic Duo Therm. However, you're going to have to replace the thermostat and air distribution box as well. Your current setup is for R410A and everything switched to R32 last year…
Hey Matthew, thanks for reaching out. We do have a heat strip kit that will work with the Advent Air RV Air Conditioner System #ADV99QR. For that you'll need the following: - Electric Heat Strip for Advent Air RV Air Conditioners - 5,500 BTU -…
Hey Ray, thanks for reaching out. Yes we do have a good option for replacing your Dometic Duo-Therm 57915.531. With yours being an older unit, there is not a direct rooftop swap that keeps your existing controls. The correct path is replacing the…
Hey Alan, while the Air Distribution Box w/ Wall-Mounted Thermostat for Advent Air RV Air Conditioners #ADV98SR does have ability to control a furnace it can't be used with a Duo Therm setup like you have. It can only work with Advent Air AC…
Hey Rob! Thanks for reaching out. The Fogatti InstaShower 9 Pro RV Tankless Water Heater #FG33FR is compatible with a standard 15" x 15" door. Based on knowing what size your existing hot water heater door is, you should have no issues…
Yes, there is Mike. The Global Link RV Lock with Bluetooth Connectivity item #GL62VR does indeed have a deadbolt function. The top left key controls the deadbolt and the key built into the handle secures the door latch. I've attached a picture…
Clean up your setup by routing your line through a round sewer hose hatch. This RV access door style works well in wet bays or floor pass-throughs and helps keep bugs out when the hose isn't in use.
Often yes, if the new Round Sewer Hose Hatch matches the original mounting pattern. A replacement was reported to fit perfectly with the same mounting holes. Measure center-to-center screw spacing and the trim ring diameter on your opening. If there's a mismatch, fill old holes and pre-drill new ones to avoid cracks.
Measure the access cover and the trim ring, then mark and cut the hole to match. One installer marked the hole and cut it with a saber saw, then cleaned up the hole before installing the hatch. Check the required cutout versus the cover size and the mounting hole pattern. If swapping sizes, confirm the outside diameter of the trim ring and the screw spacing before drilling.
It can work for wet bays and top-access jobs when properly sealed. A hatch was used in a wet bay and another was installed on top of a fresh water tank for cleaning; it was noted as waterproof to help prevent leaks. Confirm the surface is flat and clean, and use a suitable sealant under the flange. Tighten screws evenly to avoid warping.
Yes, a Round Sewer Hose Hatch can help keep bugs out of the sewer storage area. One user added it to route the sewer hose out the bottom while blocking insects. Verify the hatch closes securely and seats well against the surface. If you need extra protection, add a sealant bead around the flange during install.
4 Inch Wide Cutout
5 Inch Wide Cutout
Filters
