bing tracking image

RV Access Doors - Electrical Cable Hatch

Filter by Shape of Hatch

Filters
1

























What our customers are saying:
very easy to shop
Mike
Richmond, CA


RV Access Doors for Electrical Cable Hatch Installs

Tidy up your shore-power pass-through with an electrical cable hatch that fits your rig. Check round or rectangular sizing, your cutout and hole pattern, and cord openings like 3/4" or 1" if you're running a 12/3 extension cord. Some include hardware and seal putty, and some offer a notch for the cable. On certain designs the door isn't replaceable by itself, but the front face can swap without pulling the whole assembly. Consider black vs flat black finishes.
Installation is typically straightforward. Some options include screws and seal putty, and packaging can serve as a cutout template. Test-fit before drilling, then seal thoroughly to help keep weather out. If you're matching an existing rig, confirm finish (for example, flat black vs gloss black) to avoid a mismatch. Also check if a keyless lock or number of keys is noted.
Usually the door itself isn't designed to come off by itself. The front-facing portion can detach for replacement without pulling the entire assembly. Check the hinge and latch tab design before buying; brittle tabs or thin doors can break and may require replacing that front section.
Match your existing cutout, overall diameter, and hole spacing. Measure the opening and compare to listed cutout or OD (examples seen include 4-5/8" OD) and mounting-hole spacing like 3-7/8" center to center. If your opening is close to a listed size, you may need to expand the cutout slightly. Verify round vs rectangular dimensions before drilling.
Pick the hatch opening for what you're running. Options include 1" or 3/4" openings that suit a standard 12/3 extension cord and smaller hoses, while larger hatches are common for 30 or 50 amp RV cords. For wet hookups, look for a notch that helps reduce rain entry when a cable is plugged in.