Not sure what TST TPMS you're looking at but the best way to prevent stem failure is to be sure to use the proper air pressure in the tire. A system like the TST TPMS for RVs item #TST-507-RV-4-C can be used on rubber, steel, chrome, or nickel…
Hey Peter, what hanger dimensions do you need? What height from the mounting surface does the bolt hole need to be? With that I can see if we have a thicker gauge steel hanger option.
Hey Greg. I've got a couple of options for door locks that include a keypad. They both fit door cutouts 3-3/4" tall x 2-3/4" wide. I have listed them below: Global Link RV Entry Door Locking Latch Kit with Keyed Alike Option item…
Hey Ron! For your 2025 Ford Maverick I recommend going with the Roadmaster InvisiBrake Flat Tow Brake System #RM-8700 with the Roadmaster Stop Light Switch Kit #RM87GR and the Roadmaster Brake-Lite Relay Kit for Towed Vehicles #RM-88400. For wiring,…
Hey Rick, the opening of the Power Watchdog part #HU62VR is definitely wide enough for a Camco Power Grip power cable to fit as the Camco connectors are standard size and you can see in attached picture there's more than enough room.
Hey David, thanks for the picture! I went down to the warehouse and measured the mounting bolt pattern on the etrailer Scissor Stabilizer Jack item #e36VV and their identical to the ones in your diagram. This jack is going to be a perfect replacement…
Hi Barry; we don't have a list of trailers customers have added the etrailer Scissor Stabilizer Jacks #e56VV onto. Trailer manufacturers use a variety of scissor jacks even on the same model trailer. They're often using whatever they have…
You're experiencing the harsher ride because the overload springs engage when you tow, so what you're really needing to do is add some support to either prevent or delay the overload springs from engaging. I spoke at length with my…
Hey Lasalle, thanks for reaching out! We have a good variety of replacement door handles you can use, but I'm not sure if any of them have the exact same dimensions as what came on your Airstream. The Bauer EM RV Entry Door Lock for Motorhomes…
Hey Bill, sure can! For the etrailer Scissor Stabilizer Jack #e56VV the mounting bracket is 6-3/4" long overall. The distance between the two bracket pieces is 2-3/8". I edited a picture to illustrate.
I would go with the Prest-O Ruggids part #PR87ZR which is a confirmed fit for your step size. You'd need to order a quantity of these that matches the amount of steps you have though as these are sold individually.
No, they do not. The Stromberg Carlson Chock Wheel Stabilizers item #SC47MR are only available in the shiny steel finish. All of our wheel stabilizers have this finish so they are noticeable and prevent people from attempting to drive off with them…
Not sure what TST TPMS you're looking at but the best way to prevent stem failure is to be sure to use the proper air pressure in the tire. A system like the TST TPMS for RVs item #TST-507-RV-4-C can be used on rubber, steel, chrome, or nickel…
Hey Peter, what hanger dimensions do you need? What height from the mounting surface does the bolt hole need to be? With that I can see if we have a thicker gauge steel hanger option.
Hey Greg. I've got a couple of options for door locks that include a keypad. They both fit door cutouts 3-3/4" tall x 2-3/4" wide. I have listed them below: Global Link RV Entry Door Locking Latch Kit with Keyed Alike Option item…
Hey Ron! For your 2025 Ford Maverick I recommend going with the Roadmaster InvisiBrake Flat Tow Brake System #RM-8700 with the Roadmaster Stop Light Switch Kit #RM87GR and the Roadmaster Brake-Lite Relay Kit for Towed Vehicles #RM-88400. For wiring,…
Hey Rick, the opening of the Power Watchdog part #HU62VR is definitely wide enough for a Camco Power Grip power cable to fit as the Camco connectors are standard size and you can see in attached picture there's more than enough room.
Hey David, thanks for the picture! I went down to the warehouse and measured the mounting bolt pattern on the etrailer Scissor Stabilizer Jack item #e36VV and their identical to the ones in your diagram. This jack is going to be a perfect replacement…
Hi Barry; we don't have a list of trailers customers have added the etrailer Scissor Stabilizer Jacks #e56VV onto. Trailer manufacturers use a variety of scissor jacks even on the same model trailer. They're often using whatever they have…
You're experiencing the harsher ride because the overload springs engage when you tow, so what you're really needing to do is add some support to either prevent or delay the overload springs from engaging. I spoke at length with my…
Hey Lasalle, thanks for reaching out! We have a good variety of replacement door handles you can use, but I'm not sure if any of them have the exact same dimensions as what came on your Airstream. The Bauer EM RV Entry Door Lock for Motorhomes…
Hey Bill, sure can! For the etrailer Scissor Stabilizer Jack #e56VV the mounting bracket is 6-3/4" long overall. The distance between the two bracket pieces is 2-3/8". I edited a picture to illustrate.
I would go with the Prest-O Ruggids part #PR87ZR which is a confirmed fit for your step size. You'd need to order a quantity of these that matches the amount of steps you have though as these are sold individually.
No, they do not. The Stromberg Carlson Chock Wheel Stabilizers item #SC47MR are only available in the shiny steel finish. All of our wheel stabilizers have this finish so they are noticeable and prevent people from attempting to drive off with them…
Very easy process, good prices and my products were shipped on time and were delivered on time. The instructional videos online helped make installation easy!
These RV step covers for 3 steps are a game-changer. They fit perfectly, are easy to install, and keep dirt out of your RV. Plus, they provide a non-slip grip, making them safe for pets and people alike. Durable and stylish, they're a must-have for any RV enthusiast.
RV step covers provide a non-slip surface, reducing the risk of slips and falls, especially in wet conditions. This is crucial for both pets and people, ensuring safe entry and exit from your RV. The covers are designed to fit snugly, enhancing stability and confidence when using the steps.
These covers act like a doormat, trapping dirt and debris before it enters your RV. This keeps your interior cleaner and reduces the need for frequent cleaning. The material is rugged yet comfortable, ensuring it effectively captures dirt while being gentle on feet.
Yes, installation is a breeze. The covers come with clear instructions and are secured with springs, ensuring a tight fit. Many find the process straightforward, allowing you to quickly enhance your RV steps without hassle. The design ensures they stay in place even during travel.
These step covers are built to last. They are made from durable materials that withstand wear and tear, even with frequent use. The springs resist rusting, maintaining their functionality over time. Many find that they outlast previous covers, providing long-term value.
These covers are thin enough to allow the steps to fold properly, even with a 3-step setup. They are designed to not interfere with the folding mechanism, ensuring you can store your steps easily when on the move. This makes them a practical choice for frequent travelers.
Filters
