Different Suspension Hangers for Grand Design Reflection 29RS

Question

Question:

I need a leaf spring hanger for my GD 2018 Reflection 29RS. The original are 1/4 inch steel. Is there a hanger available of 3/8 steel. I have broken this hanger twice!

asked by: Peter C

0

Expert Reply:

Hey Peter, what hanger dimensions do you need? What height from the mounting surface does the bolt hole need to be? With that I can see if we have a thicker gauge steel hanger option.

expert reply by: Jameson C

0

Jameson C.

9/12/2025

Hey Peter, did you have a chance to check the hanger dimensions and bolt hole height? If you’re still looking for a solution, I’m happy to help.

Peter C.

9/22/2025

The hanger is 3” x4 3/4”. The hole is about 4 “ from the top. Do you have that size?

Jameson C.

9/22/2025

@PeterC I wish we could help but none of the hangers we offer are the correct dimension and thickness as you are needing. Thickest we have is 1/4 inch.

Peter C.

9/24/2025

@JamesonC You misundestood the dimensions. It is 3 x 4 3/4. Hole is 4 in from top. Your item e4139 seems to match that size. It is not 3/4 thick. Do you have a piece to strength that hanger?

Jameson C.

9/24/2025

@PeterC Sorry about the confusion on that. The thickness of the hanger part # e4139 that you referenced is actually thinner at 3/16 of an inch. We don't have anything here that would work to brace it up further. If you go to the product pictures and click the third customer photo you can see how one of our customers added some metal to brace it up a little more. If I could upload pictures in comments I would.

Answer 1

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 2

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 3

Hey Melanie. The reason you can't find a replacement for your GE ARC15AACBL2 15,000 btu air conditioner is because they phased them out. In 2025 all RV AC systems had to change over to a new coolant called R32. This was a EPA mandated decision.…

view full answer...

Answer 4

You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…

view full answer...

Answer 5

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 6

Hey Ian, great to hear from you again! The differences between the MORryde CRE3000 #MR87ZR and AllTrek 4000 #MR89DR that fit a 33" wheelbase is the height between the hanger and equalizer bolts, and the amount of travel the suspension style will…

view full answer...

Answer 7

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…

view full answer...

Different Suspension Hangers for Grand Design Reflection 29RS

Product Page this Question was Asked From

Continue Researching