Hey Patti, thanks for reaching out. The Swagman E-Spec Pro Bike Rack #S45SR is a solid option for this. It can hold two bikes weighing up to 70 lbs apiece on a 5th wheel, and it does not have a minimum tongue weight capacity limitation like the…
Hey Scott. The Lets Go Aero Jack-E Bike Rack item #LGA92ZR does not swivel and doesn't have a simple process for swapping out propane tanks. You'll need to remove the bolts attaching the tray to the supports to be able to remove your propane…
Hey Charles, the Swagman E-Spec part #S45SR is rated for use at the rear of a travel trailer so it will work great for you. It is odd that it's not closer connected to the other RV rated bike racks but that's our fault and I'll see if I…
THey Brian, the Coleman Mach Signature Mach 15 part #CM32RR is a really solid AC unit. As far as how it compares to the Furrion Chill Cube #FR69TD it only has the advantage of working more consistently with furnace controls. Aside from that the Chill…
Hey Ginger! The Lets Go Aero Jack-E Bike Rack for Electric Bikes - Trailer Tongue Rack #LGA92ZR requires minimum of 24-1/2" from center of jack hole to the front of the camper itself, so if you have 25" then you are right there and it would…
Hey Tony, you would need to go with an E-bike rack that is rated for the rougher ride quality at the rear of RVs like what you have like with the Lets Go Aero part #LGA25VR . What e-bikes do you have?
Hey Kenny, welcome back! The reason for that note is because all of the new systems since 2025 use R32 refrigerant due to EPA regulations. Any 2024 and older systems use R410A and their parts are not compatible with the R32 units. It doesn't mean…
Hey Tom, this is a really great question but we had an affiliate who tried all of the newer cushioned fifth wheel to gooseneck adapters and he said the MORryde Goosetec like the part #MR47MV provided the smoothest ride quality. This would be what I…
Hey Brett, the Lets Go Aero Jack-E Bike Rack for Electric Bikes #LGA92ZR that you referenced was designed to fit above propane tank covers like you can see in the attached picture. I don't see how it could fit behind the handles you have on that…
Hello Bobby, I have a great solution for you to be able to transport your two 55 lb bikes on the back of your travel trailer with a spare tire. You will want the Lets Go Aero V-Lectric VFR Bike Rack for 2 Electric Bikes #LGA25VR. This rack is rated…
No, it will not Mayra. The Universal Wheel Holder Kit item #HR89FR is designed to replace the wheel holders on the Hollywood Racks Sport Rider SE Bike Rack for 2 Electric Bikes item #HLY84FR. This is a custom fit replacement part so it's not…
Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…
Count on RV and camper bike racks with a bike lock when you want your bikes held fast at camp and on the road. Match your hitch—1-1/4 inch or 2 inch—and look for locking arms that use a key so your bikes stay put. If you're considering a swing-away adapter, those fit 2 inch vehicle hitches and aren't for campers or motorhomes.
Yes, as long as the rack is rated for travel trailer use. Confirm it fits your hitch size, often 2", and note that some racks specify 40 lbs per bike when used with an RV like a travel trailer. If you're considering a swing-away adapter, check the notes—some swing-away extenders cannot be used on a camper or motorhome.
Racks that use a threaded anti-rattle bolt help reduce wobble but take extra time to install. If you need a new pin or bolt, verify your hitch size—2" or 1-1/4"—to match the hardware. If the instructions call for a stabilizing strap, attach it to the rack's main mast, run it over the rear hatch, and hook it at the top edge.
Use a dry silicone spray or a dry PTFE (Teflon) spray. Avoid grease or standard oil since they attract dirt. Wipe or rinse off dust first, lightly spray the pivot where the arm moves, cycle the arm several times to work it in, then wipe off any excess.
You may be able to replace the locking arms instead of the entire rack. Check whether replacement short and long arms are offered for your platform rack. Match the arm style to your rack version, and confirm you're ordering the correct side or length before installing.
Filters
