Comparing Class III Trailer Hitch Receivers For A 2024 Toyota Corolla Cross Hybrid

Updated 01/05/2026 | Published 12/31/2024

Products Featured in This Question

EcoHitch Hidden Trailer Hitch Receiver - Custom Fit - Class III - 2"

(5)

$427.24

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

(6)

$70.36

Question:

Hi Kevin, I'm considering a hitch mounted cargo carrier for my 2024 Toyota Corolla Cross Hybrid. I just saw that there are class 111 hitches for my vehicle that are recommended for hybrids. Is it necessary to use a hitch that is specifically for hybrids? Would a hitch for gas powered vehicle installed on a hybrid potentially be a problem? Are the hitches for hybrids as strong as those for gas powered? Thanks. Mary

asked by: Mary

Expert Reply:

Hi Mary,

There can be differences in the way components under the vehicle are ran that can change how a trailer hitch will need to be shaped to fit depending on the model type. I spoke with EcoHitch and they stated that they haven't tested the # EH87CR on a non-hybrid model yet so they just can't confirm that it will fit. Since their design is unique there's not another brand using the same mounting holes to compare it to.

The Draw-Tite Max-Frame Trailer Hitch Receiver # DT28GR is a class III hitch that's listed without the same stipulations as the # EH87CR because it installs sandwiched between the bumper beam and frame. It's a hidden design just the like the EcoHitch with only the receiver tube and safety chain loops showing. EcoHitch is a more premium brand and has a higher capacity (3k GTW/450 TW) but is also more quite a bit more expensive than the Draw-Tite.

If you're wanting more capacity the # EH87CR is going to be the way to go. If your load is going to be less than 2,000lbs GTW or 300lbs TW and you don't want to spend the extra money the # DT28GR would be the way to go.

If you plan on towing a trailer or adding lights to your cargo carrier at some point you'll also want the Tekonsha # TK24CR (LED tail lights) or the # TK25VR (non-LED tail lights).

expert reply by: Kevin C

DT28GR Installed
(click to enlarge)

DT28GR with bumper off
(click to enlarge)

Jon G.

11/3/2025

Hey Mary, how did things go with the hitch for your Corolla Cross Hybrid? Did you end up choosing the EcoHitch or the Draw-Tite option for your cargo carrier? Your update could make it easier for others comparing those two setups.

Claudia

1/2/2026

Hi! Which hitch do you recommend for a Corolla Cross 2026? For bike rack? Awaiting your comments thanks

Josh B.

1/2/2026

@Claudia Hey there! It depends on how many bikes you have. For 1-2 bikes check out the Draw-Tite Hitch Receiver # DT28GR. If you're loading more than that you'll want the EcoHitch Hitch Receiver # EH87CR since it has a bit more tongue weight capacity. Do you have a bike rack already? We have a ton of great options on our site like the Benton Shifts&Grins # B54FR. It can mount your bikes by the wheel or frame and has a tilt-away feature for easy access to your trunk while loaded.

Claudia

1/2/2026

@JoshB not yet thanks I want a rack for 3 bikes something easy to load because I’m not too tall XD Thanks!!

Josh B.

1/5/2026

@Claudia not a problem! For the hitch, loading 3 bikes is going to be best handled by the EcoHitch Hitch Receiver # EH87CR as I mentioned. Now, looking at the bike rack, I recommend the Thule Epos Bike Rack # TH69XE. It has the capacity to mount any kind of bike and you'll be able to mount by the frame or wheel depending on how durable your bikes' frames are. For easy loading onto the bike rack, you want the Thule Foldable Loading Ramp # TH43VA. It attaches securely to the rack and makes the process a whole lot easier in your driveway and at the trailhead!