Hey Patti, thanks for reaching out. The Swagman E-Spec Pro Bike Rack #S45SR is a solid option for this. It can hold two bikes weighing up to 70 lbs apiece on a 5th wheel, and it does not have a minimum tongue weight capacity limitation like the…
Hi Guy, That's a great question, and thank you for providing so much detail. It really helps narrow things down. Based on your description, it sounds like you may have cruiser style or step through bikes with front baskets, and that combination…
Hey Charles, the Swagman E-Spec part #S45SR is rated for use at the rear of a travel trailer so it will work great for you. It is odd that it's not closer connected to the other RV rated bike racks but that's our fault and I'll see if I…
Hey Steven! For your 2023 Jayco Eagle 355MBQS I recommend the Hollywood Racks RV Rider Bike Rack #HLY64FR. This is rated for 5th wheel use and has a capacity of 80 lbs per bike so it works with standard bikes and e-bikes. It also uses padded clamps…
Hi Ken! It looks like you have almost everything you need to set up your 2026 Jeep Gladiator Sahara for flat towing. The etrailer Invisible Base Plate Kit - Removable Arms #e98948 is a perfect fit and the etrailer XHD Non-Binding Tow Bar - RV Mount -…
Hey Scott. The Lets Go Aero Jack-E Bike Rack item #LGA92ZR does not swivel and doesn't have a simple process for swapping out propane tanks. You'll need to remove the bolts attaching the tray to the supports to be able to remove your propane…
Hey Ginger! The Lets Go Aero Jack-E Bike Rack for Electric Bikes - Trailer Tongue Rack #LGA92ZR requires minimum of 24-1/2" from center of jack hole to the front of the camper itself, so if you have 25" then you are right there and it would…
THey Brian, the Coleman Mach Signature Mach 15 part #CM32RR is a really solid AC unit. As far as how it compares to the Furrion Chill Cube #FR69TD it only has the advantage of working more consistently with furnace controls. Aside from that the Chill…
Thanks for reaching out Ian. Rather than using a universal reducer sleeve like the Curt Reducer Sleeve - 2" Hitch to 1-1/4" Shank #C49WQ, I'd recommend the Kuat Bike Rack Shank Adapter #D101. This adapter is designed specifically for…
Hey Tony, you would need to go with an E-bike rack that is rated for the rougher ride quality at the rear of RVs like what you have like with the Lets Go Aero part #LGA25VR . What e-bikes do you have?
Hey Brett, the Lets Go Aero Jack-E Bike Rack for Electric Bikes #LGA92ZR that you referenced was designed to fit above propane tank covers like you can see in the attached picture. I don't see how it could fit behind the handles you have on that…
There sure is Fran and welcome back! The Blue Ox Tow Bar Cover item #BLU53QV is exactly what you need. This cover will fit the Blue Ox Alpha Non-Binding Tow Bar item #BX7380 perfectly. The Blue Ox Tow Bar Cover item #BLU53QV is made of heavy duty…
Very helpful/friendly Customer Service. Competitive Pricing. Shipping was Fast.
John
Mankato, MN
RV and Camper Bike Racks with RV bumper rack for 4 bikes
Bring the whole fleet along with an RV bumper rack built to carry 4 bikes. Mounting is straightforward and sturdy, but plan a solid tie-down routine to keep four bikes secure, especially when mixing adult and kids' sizes. A little play when unloaded isn't a concern once loaded, and extra straps or padding help prevent scuffs; with smaller bikes (24" and under), tightening ratchet straps can snag rims.
Secure, even spacing and extra tie-downs help a lot. Use ratchet straps and rubber straps to hold everything down, and add foam or pool noodles on frames and rack bars to prevent paint rub. If you space for adult bikes, smaller kids' bikes may not sit down tight—adjust spacing or add padding and straps where needed.
Yes, but check a few things first. Smaller bikes 24" and under can snag wheels when tightening ratchet straps, which can bend rims—route straps carefully or switch to a frame-holding approach for those. Trikes may fit with creative positioning and extra tie-downs. Confirm your bumper can handle the combined weight of the rack and bikes.
With proper tightening and loading, it can ride solid. You may feel a little play when empty, but loading the bikes helps settle it down. Use tie-downs or rubber straps to reduce movement, and recheck the hardware after the first few miles.
It can, but verify your bumper size and construction first. Some racks call for a 4" continuously welded bumper. Make sure you have room to tighten the bolts or clamps—bumpers tucked under the trailer can make access tough. If space is tight, plan for alternate hardware or repositioning to get a solid clamp.
Filters
