Ram Trailer Hitch Cover - 2" Hitches - Stainless Steel - Chrome and Red

Video Transcript for Au-Tomotive Gold Hitch Covers - OEM - AUT-RAMOEMR-C Review

Today we are going to be taking a look at part number AUT - RAMOEMR - C. This is the automotive gold Ram Trailer hitch cover for 2 inch hitches. You have the officially licensed Ram logo here on the face plate. The newest design to slide into your hitch to help keep out dirt and prevent rust and corrosion to the hitch. It's also going to add a nice clean finish look to your hitch. We're going to have the 3D ABS plastic emblem.

It gives it a really nice look. It's going to have the attractive chrome plating, adds a really nice classic style. And then we are going to have the UV resistant red paint interior. That emblem is going to sit on a polished stainless steel base so it's going to give a mirror like shine and stainless steel is highly resistant towards rust and corrosion. We're also going to have the one piece riveted construction so no assembly is required.

It's constructed fully and ready to be installed right out of the box. The shank back here this is going to be made from a stainless steel construction as well. Now you can see that we are going to have three pinholes, you can choose whichever one that's going to work best for your particular application. These pinholes are going to give us the size of 5/8 of an inch in diameter. So once you have it in your hitch, you'll need to insert a hitch pin and clip or hitch pin and lock to get it secure in your hitch. Those items are sold separately but you can find those here on our website. The product is made in the USA.

Again it is designed for 2 inch by 2 inch trailer hitch receivers. We're going to take a measurement of the shank. Measuring from the back of the face plate to the end of the shank. That's going to be about 3 and 1/2 inches. Now from the back of that face plate to the center of that first pinhole, we're looking at about 1 and 5/8 of an inch.

To the center of the middle pinhole, we are looking at 2 and 1/8 of an inch. And to the center of the rear pinhole we are looking at about 2 and 5/8 of an inch. The face plate is going to give us a measurement going this direction of 3 and 1/2 inches. And going this direction it's going to measure 3 and 3/4 of an inch. Again the product is made in the USA and it's going to be covered with a lifetime warranty. That's going to do it for today's look at part number AUT - RAMOEMR - C.