Hey Hadiya! No, the Curt E16 5th Wheel Hitch w/ S20 Slider for Ram #C85PV will not give you enough clearance to maneuver the Layton Skyline 5th wheel with your 2021 Ram 1500 with a 5-1/2' bed. This unit only moves you 12" back from the…
Hey John, thanks for the picture of your truck bed! To install a set of 5th wheel rails in your 2022 Ram 2500, I recommend the B&W Custom Installation Kit w/ Base Rails item #BWRVK2602. This set of rails are industry standard so they'll work…
Sergio, yes, the PullRite SuperGlide part #PUL63RR will work with your MORryde cushioned pin box like part #MR55QR. you will just need to pair it with the PullRite SuperGlide Quick Connect Capture Plate part #PUL76RR for the setup to function…
Hey Adam, we have just what you are looking for with the B and W fifth wheel rail kit part #BWRVK2402 which is a confirmed fit for your 2017 Ford F-250 and is the industry standard rail design which means it will fit the hitch you have. This is a…
Hey Rob! You can actually use either one, but my recommendation would be the Custom Underbed Installation Kit for B&W Companion 5th Wheel Trailer Hitches #BWGNRK1320-5W. B&W makes some of the best hitches available, and the Turnoverball is no…
Hey, Ron! I've got just the rails you need! B&W Custom Installation Kit part #BWRVK2401. This kit will come with the rails, frame brackets, and all the hardware needed for the install. Since this is a custom kit you will not have to do any…
Hey Doug. So long as your Husky 5th wheel hitch isn't three decades old you shouldn't have any issues attaching it to the B&W Custom Installation Kit w/ Base Rails item #BWRVK2402. Most 5th wheel hitches for the last 20 years have used…
You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…
Hey Kim, thanks for reaching out. The Firestone Ride-Rite Air Bags with Easy Mount Compressor #F24XV do fit your 2020 Ram 2500 with rear coil springs, but the hang-up is the under-bed gooseneck hitch. On your truck, the air bag brackets and the…
Hi Chis yes, the PullRite SuperGlide #PUL93RR will work with your 2024 Ford F-250 short bed. This hitch will work with any industry standard rails, so as long as you have a set of those you'll be good to go. If you don't have any rails, then…
I do have an option for you if you have the PullRite SuperGlide #2700 which uses industry standard rails but if you have the PullRite SuperGlide #4100 you will need to get the rails from PullRite. For the PullRite SuperGlide #2700, you can use the…
Hey Don, congrats on the new truck! To add a set of 5th wheel rails to your 2026 Chevy Silverado 1500 Trailboss, I recommend the B&W Custom Installation Kit w/ Base Rails item #BWRVK2504. This set of rails are industry standard which means they…
I like the easy of navigation through the site. It only took me a couple of minutes to place my order. Thank You I will shop this sight again in the future.
Kevin
Manchester, MD
5th Wheel Hitch Rails with universal fit
Build out your tow rig with universal 5th wheel hitch rails that match the industry-standard pattern for broad hitch and slider compatibility. Installation often requires drilling and working above the frame, so plan your layout before you start. A solid pick when you want flexibility to run different 5th wheel setups over the life of your truck.
Yes, Universal rails use industry-standard mounting points that work with slider hitches and many rail-mount adapters. Verify your hitch is designed for industry-standard base rails. If you're using a lightweight adapter-style hitch, confirm it mounts to base rails and not a bed-mounted ball.
No—Universal mounts cannot be used on 2013 and newer Ram pickups. For those trucks, choose a custom installation kit matched to the frame. Double-check your model year and configuration before you start.
Plan on drilling during installation. Use a punch before drilling pilot holes to keep bit walk in check, and be ready to trim a bed mat if the instructions call for it. Space above the frame can be tight for washers and nuts, so plan tool access. Some instructions specify 110 lbs of torque per bolt; verify torque spec and wrench clearance.
Yes, they can, but you need to address the steel-to-aluminum interface. Use the required isolators to deal with the metal contact. Confirm hitch height so you don't need to remove the tailgate or swap to a 5th wheel tailgate, and follow the bed-specific instructions closely.
Filters
