Accessories and Parts - RV Covers

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

Hey Christian, welcome to the world of RV-ing! So in addition to the Roadmaster Nighthawk #RM-676 you're also goin to need: - A baseplate kit, like the Roadmaster Direct-Connect Base Plate Kit #RM-521453-5. These attach to the Jeep itself so you…

Hey Kent, The Roadmaster Nighthawk All-Terrain Tow Bar w/ LED Lights #RM-676 is a great tow bar to start off your component list with. It's going to include safety cables, a 7-wire to 6-wire adapter cable, and s 6-pole socket. You'll need the…

...being a little bit slower in the response to the braking on their RV, which I have not seen with the Brake Buddy. With that being said, there are a couple of things that give the Brake Buddy a leg up...

Hey Dan, for your 2024 Ford F-350 that has the OEM pucks the correct Pullrite sliding hitch you need is the part #PUL73RR. The #PUL63RR fits the standard above bed fifth wheel rails that are 22 inches apart on center. What fifth wheel do you have?

Hello Stu, thanks for getting in touch. For a travel trailer approved e-bike rack, what I recommend is the Swagman E-Spec Bike Rack #S94FR. This rack has a reenforced shank, making it suitable for RVs and travel trailers. It has a 70 lb per bike…

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…