2020 Toyota Highlander Brake Controller

Features:

Towing? There's an app for that. This brake controller connects to your phone with Bluetooth so all your settings are right in your hand. The unit plugs into your 7-way for a one-step installation with no wiring.

Installation Notes:

You need item ETBC7L ($118.40) to install your controller.

You may also need a 4-Flat connector to complete your wiring.

Features:

Wireless brake controller mounts on your trailer to keep your cab clutter-free. Keep towing simple and convenient with a handheld, Bluetooth remote control. Nothing installs in your vehicle, so you can tow with any truck that has a 7-way.

Installation Notes:

You need item ETBC7L ($118.40) to install your controller.

You may also need a 4-Flat connector to complete your wiring.

Features:

This unique brake controller mounts on your trailer instead of in your truck cab. You won't be knocking your knee against it, and you can tow your trailer using any truck. The handy key fob gives you remote control of your braking.

Installation Notes:

You need item ETBC7L ($118.40) to install your controller.

Features:

This proportional brake controller automatically syncs to your vehicle's computer network for smooth, precise braking. Low-speed brake adjustment gives you 2 settings for different speeds. Plug-and-play controller mounts in any direction.

Installation Notes:

You need item ETBC7 ($117.63) to install your controller.

Application includes both Hybrid and non-Hybrid models

You may also need a 4-Flat connector to complete your wiring.

Tech Tip:

Caution: Do not disconnect the brake light switch on Hybrids unless battery is disconnected or ignition is in the off position or else you may set off a code in the computer system that limits the vehicle's motion.

Features:

You can stick the control knob to the dashboard, plug in the module, and your brake controller installation is done with no drilling and no hardwiring. The knob is large and easy to use, while the main unit is out of sight behind the dash.

Installation Notes:

You need item ETBC7 ($117.63) to install your controller.

Application includes both Hybrid and non-Hybrid models

You may also need a 4-Flat connector to complete your wiring.

Tech Tip:

Caution: Do not disconnect the brake light switch on Hybrids unless battery is disconnected or ignition is in the off position or else you may set off a code in the computer system that limits the vehicle's motion.

Features:

Get the best towing experience with this kit. 2-5/16" Hitch ball absorbs shock. Wireless brake controller applies your trailer's brakes proportionately. Friction sway control helps keep your trailer in line. And hitch pin limits rattle.

Installation Notes:

You need item ETBC7L ($118.40) to install your controller.

Product intended for 2-inch hitch and trailers less than 7,500 lbs GTW/750 lbs TW.

You may also need a 4-Flat connector to complete your wiring.

Features:

This is one of our favorite brake controllers, with a tiny dash knob that looks like it came straight from the factory. It's easy to adjust your settings or activate manual override. It brakes so nicely it's like you're not even towing.

Installation Notes:

You need item ETBC7 ($117.63) to install your controller.

Application includes both Hybrid and non-Hybrid models

Caution: Do not disconnect the brake light switch on Hybrids unless battery is disconnected or ignition is in the off position or else you may set off a code in the computer system that limits the vehicle's motion.

You may also need a 4-Flat connector to complete your wiring.

Tech Tip:

For a factory look using an empty switch space in your dash, this control knob insert RED48FR is designed specifically for this vehicle (sold separately).

Features:

This is one of our favorite brake controllers, with a tiny dash knob that looks like it came straight from the factory. It's easy to adjust your settings or activate manual override. It brakes so nicely it's like you're not even towing.

Installation Notes:

You need item ETBC7 ($117.63) to install your controller.

Application includes both Hybrid and non-Hybrid models

Caution: Do not disconnect the brake light switch on Hybrids unless battery is disconnected or ignition is in the off position or else you may set off a code in the computer system that limits the vehicle's motion.

You may also need a 4-Flat connector to complete your wiring.

Tech Tip:

For a factory look using an empty switch space in your dash, this control knob insert RED48FR is designed specifically for this vehicle (sold separately).